Engine Modifications & Upgrades
Filter by brand
IMS Double Row Bearing Direct Oil Feed (DOF) Intermediate Shaft Retrofit Kit for Boxster 986 / 996
Code: IMSDOF9962
IMS KIT DOUBLE ROW STEEL BEARING
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with DOUBLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9962
The product you are viewing cross references to these numbers
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with DOUBLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9962
106-08.2
99610590100
99610590101
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610502406
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£840.00
Now £798.00
In stock 
IMS Single Row Bearing Direct Oil Feed (DOF) Intermediate Shaft Retrofit Kit for Boxster 986 / 996
Code: IMSDOF9961
IMS KIT SINGLE ROW STEEL BEARING
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with SINGLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9961
The product you are viewing cross references to these numbers
Before ordering, it is necessary to identify which bearing size you need. There are two types of bearings (Single row and Double row) used in these engines. This kit comes with SINGLE row bearing.
Fits:
Porsche 986 Boxster 1997 -2004
Porsche 996 Carrera 1997 -2004
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
IMS Bearing
3 micro-encapsulated Porsche bolts
Spacer for bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSDOF9961
106-08.2
99610590100
99610590101
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610502406
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£810.00
Now £769.50
Arriving soon
.JPG?width=197&height=148 "Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD - 86174, 86174-3.2")
Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD
Code: IPDKIT98632
Aluminum Intake Plenum Competition + 74mm Throttle Body Porsche 986 Boxster IPD
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98632
The product you are viewing cross references to these numbers
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98632
86174
86174-3.2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
£762.00
Now £723.90
In stock
Spin off oil filter adapter with K&N oil filter for MY97-08 engines
Code: OILFILTERKIT1
Spin off oil filter adapter with K&N oil filter for MY97-08 engines
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT1
The product you are viewing cross references to these numbers
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT1
3609402061
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£135.83
Now £129.04
In stock
Spin off oil filter adapter with Mahle oil filter for MY97-08 engines
Code: OILFILTERKIT2
Spin off oil filter adapter with Mahle oil filter for MY97-08 engines
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT2
The product you are viewing cross references to these numbers
This filter adapter replaces the paper type filter Porsche # 99610702053 / 54 / 55 99610722553 and 99610722560
We recommend this set up of oil filter when an IMS bearing upgrade is done as this will limit damage from foreign object debris that would otherwise re-contaminate the engine when using the factory filter arrangement from wear particles or debris. It helps improve the longevity of your engine by providing full flow filtration by deleting the bypass, which means 100% of the oil gets filtered and whatever goes to the filter stays in the filter
Fits:
Porsche engines between years 1997-2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILFILTERKIT2
99610702053
99610722553
99610722560
99610702054
99610702055
3609402062
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£135.00
Now £128.25
In stock
Underdrive crankshaft pulley (with A/C) for Porsche 996 / 997 / 986 Boxster
Code: 3609001601-AC
Under drive crankshaft pulley (with A/C) kit. Includes pulley, drive belt and new bolt. Pulley is made from 6061-T6 aluminum, Improve horsepower and torque while reducing parasitic drag from the alternator, power steering pump and water pump.
Pulley outer diameter: 123mm (measured from ribs to ribs)
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-AC
The product you are viewing cross references to these numbers
Pulley outer diameter: 123mm (measured from ribs to ribs)
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-AC
99610211562
99610511563
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£147.95
Now £140.55
In stock
Underdrive crankshaft pulley (without A/C) for Porsche 996 / 997 / 986 Boxster
Code: 3609001601-NO-AC
Under drive crankshaft pulley (without A/C) kit. Includes pulley, drive belt and new bolt. Pulley is made from 6061-T6 aluminum, Improve horsepower and torque while reducing parasitic drag from the alternator, power steering pump and water pump.
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-NO-AC
The product you are viewing cross references to these numbers
FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal
Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6
Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA
Will not work on 3.8L (S) or Turbo models
For INSTALLATION GUIDE CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601-NO-AC
99610211562
99610511563
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£146.95
Now £139.60
In stock
Additional rear main no. 8 bearing seal and housing. Porsche 986 Boxster / 996
Code: 996986REAREPS
Additional rear main no. 8 bearing seal and housing.
Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009
Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.
Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996986REAREPS
The product you are viewing cross references to these numbers
Fits:
Porsche 986/987 Boxster 1997-2009
Porsche 996/997 1997-2009
Our team of technicians has developed a Rear Main Seal that corrects the notorious rear main oil leaks on the m96 and m97 engines. It has been developed to solve the twisting of the last journal of the crank shaft, reducing engine vibration and extending engine life. Prevent engine failure, by replacing your factory rear main seal with our upgraded rear main bearing seal and housing.
Features:
• prevents crank warping
• decreases engine vibrations
• prevents piston rod #6 failure
• extends engine life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996986REAREPS
996986REAREPS
99911349040
99911349041
99710121200
99710121201
0PB105249
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£595.00
Now £583.10
In stock
Brey Krause Deep Sump Kit. Porsche 996 / 997 / 986 Boxster / 987 >>2008
Code: R-9095
Brey Krause Deep Sump Kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
R-9095
The product you are viewing cross references to these numbers
For Boxster 986, 987 and 996, 997 Non-Turbo Models through 2008
Scavenging and aeration in the oil pan have been identified as a problem in 996/997, Boxster, and Cayman models experiencing high G-forces on the racetrack. The R-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. The R-9095 is approved by the Porsche Club of America for use in PCA club racing Stock and Prepared class cars. The R-9095 kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance.
*Note: Oil pan and sump baffle are OEM parts and do not need to be purchased. Baffle spacer and pick-up tube spacer are included in this kit.
Material: 6061 T6 Aluminum Alloy
Finish: Clear Anodized
Weight: N/A
Models: Boxster, Boxster S, 996/997 models (excludes GT3 and turbocharged models) and Cayman through 2008.
Installation: For best results internal baffle passages should be modified. Modification instructions included in the kit.
Miscellaneous: Spacer adds .5 U.S. quarts to oil pan volume and improves internal baffling system. Extension bolts, baffle spacer and pick-up tube spacer included in the kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
R-9095
99610703158
99610703155
99610703157
9961070315
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£274.90
Now £269.40
In stock
Deep sump track oil pan kit 2 Quart (1.89 Litre). Porsche 996 / 997 / Boxster 986 / Boxster 987 / Cayman 987C
Code: 996107032XX
2 Quart (1.89 Litre) Deep Sump Track Oil Pan Kit.
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).
This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.
Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes
Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996107032XX
The product you are viewing cross references to these numbers
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).
This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.
Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes
Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
996107032XX
996107032XX
99610703158
99610703155
99610703157
9961070315
996107031XX
3609101000
99610703155
99610703157
99610703158
99610724341
99610724340
3609101000
106-00
106-00.1
106-00.2
106-00.3
106-00.4
106-00.5
106-00.6
106-00.7
106-00.8
106-00.9
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£260.00
Now £254.80
In stock
Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997
Code: 99610215199/1
Drive Belt for Motorsport Under Drive Pully cars WITH Aircon. Porsche 996/ Boxster 986/997
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987 MKI
Porsche Cayman 987C MKI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215199
The product you are viewing cross references to these numbers
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987 MKI
Porsche Cayman 987C MKI
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215199
6PK2100
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Price: £22.95
In stock
Drive Belt for Under Drive Pully cars WITHOUT Aircon Porsche 996/ Boxster 986
Code: 99610215198/1
Drive Belt for Motorsport Under Drive Pully cars WITHOUT Aircon Porsche 996/ Boxster 986
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/o air conditioning - 1930mm
Under drive pulley w/o air conditioning - 1905mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche Boxster 986
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215198
The product you are viewing cross references to these numbers
What size serpentine belt to run when using an under drive pulley?
The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.
So in review:
Stock pulley w/o air conditioning - 1930mm
Under drive pulley w/o air conditioning - 1905mm
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche Boxster 986
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610215198
6PK1905
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Price: £21.95
In stock
Engine mount with HD 95A shore rating bush Porsche 986 Boxster 1997-04 / 987 Boxster 2005 > / 987C Cayman 2006 >
Code: 3609309871
Engine mount with HD 95A shore rating bush
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309871
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
98737502304, 98737502305, 98637502307
Click 'Zoom in' for large parts diagram.Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309871
98737502304
98737502305
98637502307
9863750230
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£195.00
Now £191.10
In stock
Engine mount with HD polyurethane bush Porsche 986 Boxster 1997-04 / 987 Boxster 2005 > / 987C Cayman 2006 >
Code: 3609309872
Engine mount with HD polyurethane bush
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309872
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2006-08
This product replaces:
98737502304, 98737502305, 98637502307
Click 'Zoom in' for large parts diagram.Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309872
98737502304
98737502305
98637502307
9863750230
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£195.00
Now £191.10
In stock
Harmonically damped underdrive pulley for Porsche 986, 996, 987, 997 models
Code: 3609001608
Harmonically damped underdrive pulley. Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001608
The product you are viewing cross references to these numbers
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001608
99710224101
3609001608
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£199.00
Now £195.02
In stock
HPDE 2 Quart Accusump Universal Kit. Porsche 987 Cayman / Boxster / 997
Code: 106-12.1
HPDE 2 Quart Accusump Universal Kit.
Fits:
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 987 Boxster 2005-08
Porsche 987 Cayman 2005-08
Porsche 997 2005-08
The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level.
The LN Engineering HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes a two quart Marine Accusump system including LN Engineering's Spin-On Full-Flow Oil Filter Adapter, single input sandwich adapter (for easy one-line installation - fits between filter and LN spin on filter adapter), the LN Engineering Billet Washable High Performance Oil Filter, 45 psi electronic valve, hose, and fittings. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible. For installation support and for troubleshooting technical issues with your Accusump, please contact Canton directly.
NO WARRANTY, RETURNS, OR EXCHANGES ON ACCUSUMP KITS!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-12.1
106-12.1
106121
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£2,020.00
Now £1,979.60
In stock
Intermediate shaft (IMS) bearing kit - for Porsche
Code: 8102
Intermediate shaft (IMS) bearing kit - for Porsche
The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.
Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8102
The product you are viewing cross references to these numbers
The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.
Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8102
99610590102TOOL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£234.92
Now £230.22
In stock
Intermediate shaft IMS bearing upgrade. eternal Fix IMS Boxster 986 / 996 / 997
Code: 99610590102EPS
IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102EPS
The product you are viewing cross references to these numbers
for M96 Engines and Early M97.01
Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005
Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)
Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L
**M96 Engine only
Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)
IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!
Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.
For More Information CLICK HERE
For Installation Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102EPS
106-08.2
106-08.2R
106-08.4R
106-08.4
99610590102
99610590103
99610590104
99610590105
99610590106
99610590107
99610590100
99610590101
99610502406
99610602704
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£575.00
Now £563.50
In stock
Intermediate shaft seal IMS Retrofit Pro Tool Kit for Boxster 986 / 996 / 997
Code: 99610590102TOOL
IMS Tool Kit by EPS
Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102TOOL
The product you are viewing cross references to these numbers
Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102TOOL
99610590102TOOL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£205.00
Now £200.90
In stock
Large IMS bearing for DOF
Code: 99610599677
Large IMS bearing for DOF
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610599677
The product you are viewing cross references to these numbers
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610599677
99610599677
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£135.00
Now £132.30
In stock
M96 Faultless Tools IMS Removal & Installation Tool Kit (Req. for 106-08.2.2)
Code: 106-08.22
The Faultless IMS Tool is required for installation of the Single Row Pro IMS Retrofit and can also be used to install all existing IMS Retrofit and Solution bearings, as well as for extraction of the original bearing.
Installation of newest Single Row Pro IMS Retrofit is carried out with newly developed, patent pending method, allowing for positive retention of the new bearing with an internal wire-lock. The installation of a dual row bearing in the place of a single row would not be possible without the specialized tooling and processes. The Faultless IMS Tool is required for installation of the Single Row Pro IMS Retrofit and can also be used to install all existing IMS Retrofit and Solution bearings, as well as for extraction of the original bearing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-08.22
106-08.22
1060822
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£865.00
Now £847.70
In stock
Oil drain sump plug magnetic . Porsche 996 / 997 / Boxster / Cayman
Code: 90021900930/1
Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm
Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90021900930
The product you are viewing cross references to these numbers
Hard Anodized Aluminum, with magnet, 18 x 1.5mm
Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:
Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.
Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.
Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.
Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.
Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.
Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.
While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90021900930
90021900930
847603075468
106-07
90021900930PRM
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£23.95
Now £23.23
In stock
Oil Filter Spin-on Type
Code: HP-1007
Oil Filter Spin-on Type
Fits:
Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.
Porsche 987.2 MY09+ Boxster and Cayman models
Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06
Fits:
Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.
Porsche 987.2 MY09+ Boxster and Cayman models
Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£10.83
Now £10.61
In stock
Oil Filter Spin-on Type (Short type)
Code: OC1051
Oil Filter Spin-on Type (Short type)
Fits:
Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.
Porsche 987.2 MY09+ Boxster and Cayman models
Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OC1051
The product you are viewing cross references to these numbers
Fits:
Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.
Porsche 987.2 MY09+ Boxster and Cayman models
Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OC1051
106-01.1X
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
Price: £10.00
In stock
Oil sump baffle kit X51 powerkit style. Porsche 986 / Gen 1 987 / 996 / Gen 1 997
Code: 106-00.6
Oil sump baffle kit X51 powerkit style.
Fits
Porsche 986 Boxster
Porsche 987 Gen 1 Boxster / Cayman - >>2008
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-00.6
The product you are viewing cross references to these numbers
Fits
Porsche 986 Boxster
Porsche 987 Gen 1 Boxster / Cayman - >>2008
Porsche 996 Carrera 2 / Carrera 4 / Carrera 4S
Porsche 997 Gen 1 Carrera 2 / Carrera S / Carrera 4 / Carrera 4S - >>2008
The EBS Racing X51-style M96/M97 oil pan baffle kit for use with the standard oil pan (without a deep sump extension) is a heavy duty, all-metal construction oil baffle for all Boxster, 996 and 997 engines up to model year 2008, except for turbo and GT3 models.
This CAD-designed and precision-built oil system enhancement component keeps more of your oil where is belongs during sport driving; around the pick up. For consistent performance from day one, metal doors are used which will not deteriorate or warp like the factory. Easily mounted on any factory oil pan, the EBS oil baffle assembly comes with hardware and instructions for easy installation.
Kit includes
EBS Racing M96/97 oil baffle assembly
LC5900 sealant
6x10mm serrated flange bolts - x3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-00.6
99610724351
99610703160
99710724300
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£399.00
Now £391.02
In stock
Performance gearbox mounts for Porsche 986/987/Cayman
Code: 3609309627
SET OF 2 , Fast Road Performance gearbox / transmission Mounts. Semi-Solid Design.
Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Simple and easy upgrade to failing OE transmission mounts. Perfectly balanced without compromising on the comfort and noise in the cabin.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309627
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Simple and easy upgrade to failing OE transmission mounts. Perfectly balanced without compromising on the comfort and noise in the cabin.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609309627
98637509304
98637509404
98737509302
98737504102
98737504202
98637504902
98637508404
98637508304
3609309627
98737509302
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£259.00
Now £253.82
In stock
RSS Performance gearbox mounts for Porsche 986/987/Cayman
Code: 627
RSS Tarmac Series Performance Transmission Mounts are on the 2015 PIRELLI WORLD CHALLENGE TC CHAMPIONSHIP Cayman!
SET OF 2
AVAILABLE FOR
Porsche 986 Boxster and 987 Boxster / 987 Cayman
FITS MODEL VARIANTS INCLUDING MK.1 & MK.2 with 6 Speed Manual or PDK Transmission.
• The RSS Tarmac Series Performance Transmission Mounts are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis.
• With factory Transmission mounts, the drivetrain will move independent of the chassis during acceleration, deceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.
• RSS Performance Transmission mounts minimize these effects by utilizing specialized polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback.
• This upgrade will NOT significantly affect ride quality or cause knock sensor issues commonly associated with solid transmission mounts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
627
The product you are viewing cross references to these numbers
SET OF 2
AVAILABLE FOR
Porsche 986 Boxster and 987 Boxster / 987 Cayman
FITS MODEL VARIANTS INCLUDING MK.1 & MK.2 with 6 Speed Manual or PDK Transmission.
• The RSS Tarmac Series Performance Transmission Mounts are designed for the Porsche driver who demands the absolute maximum in precision handling, feedback and control from their chassis.
• With factory Transmission mounts, the drivetrain will move independent of the chassis during acceleration, deceleration and cornering loads. This movement can upset the balance of the vehicle and create negative handling effects.
• RSS Performance Transmission mounts minimize these effects by utilizing specialized polyurethane bushings which offer a firmer, more direct driving feel with optimum feedback.
• This upgrade will NOT significantly affect ride quality or cause knock sensor issues commonly associated with solid transmission mounts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
627
627
98637509304
98637509404
98737509302
98737504102
98737504202
98637504902
98637508404
98637508304
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£425.08
Now £416.58
In stock
RSS Underdrive Pulley for Porsche 986, 996, 987, 997 models
Code: 608
Underdrive pulley.
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.
• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use
Installation tool (wrench) and new OEM Pulley Washer included:
Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ
*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
MADE IN USA
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
608
The product you are viewing cross references to these numbers
replacement for OE 99710224101
Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.
The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.
• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use
Installation tool (wrench) and new OEM Pulley Washer included:
Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ
*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1
MADE IN USA
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
608
608
99710224101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£456.00
Now £446.88
In stock
RSS Underdrive Pulley for Porsche 996/997/Boxster 986
Code: 601
Underdrive Pulley for Porsche 996/997/Boxster 986
Replacement for OE 99610211562, 99610511563,
The RSS Lightweight High Strength Underdrive Pulley is made from 6061-T6 aluminum. A must for any street or track enthusiast
• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Installation wrench included.
• Works on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), 3.8L, DFI engines, GT2, GT3 and Turbo.
*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 601 Kit)
Please read fitting instructions before purchase.
**Please note you will need a new shorter Pully Belt
99610215199/1
Under drive pulley w/ air conditioning - 2100mm
99610215198/1
Under drive pulley w/o air conditioning - 1905mm
Underderive Pulley Installation Instructions - CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
601
The product you are viewing cross references to these numbers
Replacement for OE 99610211562, 99610511563,
The RSS Lightweight High Strength Underdrive Pulley is made from 6061-T6 aluminum. A must for any street or track enthusiast
• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Installation wrench included.
• Works on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), 3.8L, DFI engines, GT2, GT3 and Turbo.
*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 601 Kit)
Please read fitting instructions before purchase.
**Please note you will need a new shorter Pully Belt
99610215199/1
Under drive pulley w/ air conditioning - 2100mm
99610215198/1
Under drive pulley w/o air conditioning - 1905mm
Underderive Pulley Installation Instructions - CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
601
99610211562
99610511563
601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£209.76
Now £205.56
Orderable
Spin on oil filter adapter for MY97-08 engines
Code: 3609402061
Spin on oil filter adapter for MY97-08 engines.
Requires K&N filter HP-1007
Fits:
Porsche engines between years 1997-2008
Requires K&N filter HP-1007
Fits:
Porsche engines between years 1997-2008
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£125.00
Now £122.50
In stock
Supplemental Tool kit for IMS Solution and Upgrade kits
Code: 106-08.21
The Supplemental Tool kit is required for installation of the Single Row and Dual row IMS Solution and also for M96 /MY06-08 Upgrade - kit 106-08.30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
106-08.21
106-08.21
1060821
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£318.00
Now £311.64
In stock
TRS Backflow Preventer (BFP) Remote Filter Adapter with integrated check valve & fittings. Porsche Boxster / Cayman / 996 / 997
Code: TRS-BFP-M9697
TRS Backflow Preventer (BFP) Remote Filter Adapter with integrated check valve & fittings.
Fitment:
Porsche 986 Boxster / Boxster S 1997 – 2004
Porsche 987 Boxster / Boxster S 2005 – 2008
Porsche 987C Cayman / Cayman S 2006 – 2008
Porsche 996 (911) Carrera / Carrera 4S 1998 – 2004
Porsche 997 (911) Carrera / Carrera S / Carrera 4S 2005 – 2008
PATENT PENDING. MADE IN U.S.A.
More and more we hear about connecting rod bearings seizing or cylinders becoming scored and destroying Porsche M96 and M97 engines. This all has to do with poor lubrication on banking and high speed corners which can result in high engine oil temperature and oil pump starvation. Introducing our newest component, the backflow preventer (BFP).
Our Remote Oil Filter Adapter Backflow Preventer (BFP) goes directly in place of the original factory oil filter canister allowing for ease of installation of lubrication & pressure accessories such as oil pressure compensator(s), external oil cooler(s) and a larger, metal oil filter element. Our (BFP) also eliminates restrictive filter size spin on oil filter adapters and sandwich plate options by combining the two into one component & integrating a backflow check valve. Two key benefits here is our (BFP) will provide a greater ground clearance allowing for a much larger remote mounted filter to be placed, which will provide a better oil filtration and flow for the engine assembly, as well as the ability to connect & install multiple oil lubrication & cooling accessories.
Some spin-on oil filter kits currently on the market go in place of the original filter canister area, eliminating the possibility of having multiple oil system accessories, forcing you to use either an oil cooler delete plate with external oil cooler, a spin on "sandwich adapter" in conjunction with the spin on filter adapter to connect an accessory OR nothing at all with simply a smaller filter. This will also create ground clearance issues having multiple components sandwiched together with the inclusion of the oil filter, especially on lowered vehicles. The only way to prevent a ground clearance issue on this setup is to use the smallest filter possible. If a spin on filter adapter & sandwich plate are used without the inclusion of a spin on oil filter, ground clearance will not be the issue at hand; the connection of multiple oil lubrication accessories becomes limited and the greater number of items to purchase increases to have the same oil kit solutions found with our (BFP) stage kits. A remote oil filter adapter and filter will still need to be placed. Save time and money with our (BFP).
A sandwich adapter combo with the spin-on oil filter will also require the use of an external oil check valve which has a maintenance life and will need to be replaced overtime. The (BFP)'s integrated check valve has a lifetime service life eliminating the need to replace a check valve.
Smaller filters are a lot more restrictive on their filtration and will have decreased service intervals. Compared to the original factory oil filter element and other smaller spin-on oil filters, the larger oil filter found on our (BFP) kits diminishes dry starts under cold cranking conditions due to its low restriction design & internal anti-drain back valve assuring immediate oil flow. The larger filter also has a greater burst pressure of up to 500psi designed to take pressure spikes in race engines that have higher oil pressure.
Simple. Easy. Reliable.
Fitment:
Porsche 986 Boxster / Boxster S 1997 – 2004
Porsche 987 Boxster / Boxster S 2005 – 2008
Porsche 987C Cayman / Cayman S 2006 – 2008
Porsche 996 (911) Carrera / Carrera 4S 1998 – 2004
Porsche 997 (911) Carrera / Carrera S / Carrera 4S 2005 – 2008
PATENT PENDING. MADE IN U.S.A.
More and more we hear about connecting rod bearings seizing or cylinders becoming scored and destroying Porsche M96 and M97 engines. This all has to do with poor lubrication on banking and high speed corners which can result in high engine oil temperature and oil pump starvation. Introducing our newest component, the backflow preventer (BFP).
Our Remote Oil Filter Adapter Backflow Preventer (BFP) goes directly in place of the original factory oil filter canister allowing for ease of installation of lubrication & pressure accessories such as oil pressure compensator(s), external oil cooler(s) and a larger, metal oil filter element. Our (BFP) also eliminates restrictive filter size spin on oil filter adapters and sandwich plate options by combining the two into one component & integrating a backflow check valve. Two key benefits here is our (BFP) will provide a greater ground clearance allowing for a much larger remote mounted filter to be placed, which will provide a better oil filtration and flow for the engine assembly, as well as the ability to connect & install multiple oil lubrication & cooling accessories.
Some spin-on oil filter kits currently on the market go in place of the original filter canister area, eliminating the possibility of having multiple oil system accessories, forcing you to use either an oil cooler delete plate with external oil cooler, a spin on "sandwich adapter" in conjunction with the spin on filter adapter to connect an accessory OR nothing at all with simply a smaller filter. This will also create ground clearance issues having multiple components sandwiched together with the inclusion of the oil filter, especially on lowered vehicles. The only way to prevent a ground clearance issue on this setup is to use the smallest filter possible. If a spin on filter adapter & sandwich plate are used without the inclusion of a spin on oil filter, ground clearance will not be the issue at hand; the connection of multiple oil lubrication accessories becomes limited and the greater number of items to purchase increases to have the same oil kit solutions found with our (BFP) stage kits. A remote oil filter adapter and filter will still need to be placed. Save time and money with our (BFP).
A sandwich adapter combo with the spin-on oil filter will also require the use of an external oil check valve which has a maintenance life and will need to be replaced overtime. The (BFP)'s integrated check valve has a lifetime service life eliminating the need to replace a check valve.
Smaller filters are a lot more restrictive on their filtration and will have decreased service intervals. Compared to the original factory oil filter element and other smaller spin-on oil filters, the larger oil filter found on our (BFP) kits diminishes dry starts under cold cranking conditions due to its low restriction design & internal anti-drain back valve assuring immediate oil flow. The larger filter also has a greater burst pressure of up to 500psi designed to take pressure spikes in race engines that have higher oil pressure.
Simple. Easy. Reliable.
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£475.00
Now £465.50
Orderable
Underdrive crankshaft pulley for Porsche 996 / 997 / 986 Boxster
Code: 3609001601
Lightweight Under drive Pulley is made from 6061-T6 aluminium. Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator.
Pulley outer diameter: 123mm (measured from ribs to ribs)
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Replacement Pulley for Original Porsche parts No. 99610211563
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987
Porsche Cayman 987C
**Please note you will need a new shorter Pully Belt which you can purchase from us.
99610215199/1
Under drive pulley w/ air conditioning - 2100mm
99610215198/1
Under drive pulley w/o air conditioning - 1905mm
Underderive Pulley Installation Instructions - CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601
The product you are viewing cross references to these numbers
Pulley outer diameter: 123mm (measured from ribs to ribs)
Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.
Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.
Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.
Replacement Pulley for Original Porsche parts No. 99610211563
Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987
Porsche Cayman 987C
**Please note you will need a new shorter Pully Belt which you can purchase from us.
99610215199/1
Under drive pulley w/ air conditioning - 2100mm
99610215198/1
Under drive pulley w/o air conditioning - 1905mm
Underderive Pulley Installation Instructions - CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3609001601
99610211562
99610511563
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£125.00
Now £122.50
In stock
Water Thermostat with Thermostat Insert 160F Low Temperature Porsche 986 Boxster / 996 / 987 Boxster / 997
Code: 99610601361/1
160F Low Temperature Thermostat HOUSING WITH INSERT & Gasket for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08
Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.
Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610601361
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08
Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.
Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610601361
99610612553
99610601359
99610601361
99610612554
99610612153
99610612155
99610632650
99610632651
99610612552
99610601360
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£55.95
Now £54.83
In stock
Water Thermostat without Thermostat Insert 160F Low Temperature Porsche 986 Boxster / 996 / 987 Boxster / 997
Code: 99610601361/3
160F Low Temperature Thermostat housing without gasket / seal for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08
Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.
Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610601361
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08
Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.
Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610601361
99610612553
996.106.125.53
106-06.1
106-06.2
99610601359
99610601361
460-71
99610612554
99610601360
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£39.50
Now £38.71
In stock
DISPLAYING 1 to 35 (of 35 products)
Also found on these pages
You may also like
-
ECU Re-Mapping DIY
-
Electronic Throttle Booster
-
IRIDIUM POWER Spark Plugs
-
IRIDIUM RACING Spark Plugs
-
Plasma Direct Coils
-
Hi Flow Air Filters
-
Air Induction Kits
-
Short GearShift Kits
-
Performance Plenum
-
ECU Reader / Fault Finder
-
Exhaust Packages
-
Fuel Additives
-
Pedals / Floor Boards / Track Mats LHD Cars
-
Pedals / Floor Boards / Track Mats RHD Cars
-
Fire Extinguisher Mounts
-
Brey-Krause Fire Extinguisher Mount
-
Tow Eye Hooks & Tie Downs
-
Alloy Block Off Plates
-
Clutches / Flywheels / Hydraulics
-
Track & Race Coolant Radiators
-
CP Carrillo Connecting Rods
-
Brake Hoses Stainless Steel Goodridge
Popular Models
.JPG){kind=link}
