发动机改装及升级

HPDE 2 Quart Accusump Universal Kit.

Fits:
Porsche 986 Boxster 1997-04
Porsche 996 Carrera 1998-04
Porsche 987 Boxster 2005-08
Porsche 987 Cayman 2005-08
Porsche 997 2005-08

The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level.

The LN Engineering HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes a two quart Marine Accusump system including LN Engineering's Spin-On Full-Flow Oil Filter Adapter, single input sandwich adapter (for easy one-line installation - fits between filter and LN spin on filter adapter), the LN Engineering Billet Washable High Performance Oil Filter, 45 psi electronic valve, hose, and fittings. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible. For installation support and for troubleshooting technical issues with your Accusump, please contact Canton directly.

NO WARRANTY, RETURNS, OR EXCHANGES ON ACCUSUMP KITS!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-12.1

您正在查看的产品与这些编号存在交叉引用关系

ID1700-XDS 喷油器动力学。14 毫米（灰色）适配器顶部。
6 件套。

＃语气＃

适合：
保时捷 996 涡轮增压
保时捷 997.1 涡轮增压

ID1700-XDS 的设计旨在填补 ID1300-XDS 和 ID2600-XDS 之间的空白，与这两者一样，它具有耐腐蚀内部结构，使其与所有已知的汽车燃料兼容。

经过长期开发，ID1700-XDS 拥有独特的磁路，可避免其他高阻抗高流量喷射器存在的电压和压力敏感性问题。ID1700-XDS 在当前汽车系统典型的高压条件下表现出色，在这些应用中可完美运行。

应用说明

ID1700-XDS 被设计为兼容所有燃料的喷射器，能够实现极高的流速。因此，它最常用于向增压发动机输送 E85，或偶尔用于极高马力应用中的汽油。这两种应用都不需要低流速下的延长线性，因此在设计过程中，它的优先级相对较低。

ID1700-XDS 将在 E85 上提供完美的化学计量怠速和巡航混合物，但与 ID2600-XDS 一样，不应期望在汽油上做到这一点。

如果您需要完美的汽油驾驶性能，ID1300-XDS 可以提供这种性能，并且每个 E85 喷射器可提供约 150 马力。

• 标称流速 – 1725cc/min @ 3.0 Bar (43.5 psi) 使用异辛烷，温度为 52 摄氏度 (125 华氏度)
• 最大燃油压差 – 7.0 Bar (101.5 psi)
• 燃料兼容性——与甲醇/乙醇/所有已知的碳氢化合物燃料兼容。
• 电连接器 – USCAR

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1700.48.14.14.6

您正在查看的产品与这些编号存在交叉引用关系

中间轴 (IMS) 轴承套件 - 适用于保时捷

8102 专为快速安全地拆卸和更换 M96 和 M97 发动机上的保时捷 IMS（中间轴）轴承而开发，该发动机适用于 1999 年至 2008 年所有水冷 911、Boxster 和 Cayman 车型。配有凸轮轴和曲轴正时工具。

保时捷应用：911，Boxster，开曼（1999 - 2008）。
发动机代号应用包括：M96、M97。
套件包括适用于早期和晚期发动机的凸轮轴和曲轴锁定工具。
提供了 2 种拆卸轴承的方法。按照 OEM 说明安装轴承。
谢菲尔德制造。重要提示：使用前确保力螺钉已用二硫化钼润滑脂充分润滑。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8102

您正在查看的产品与这些编号存在交叉引用关系

IMS Intermediate Shaft Bearing Upgrade. Eternal Fix
for M96 Engines and Early M97.01

Fits:
Porsche 996 C2 3.4L 1998 - 2001
Porsche 996 C2 3.6L 2002 - 2004
Porsche 996 C4 3.4L 1999>>
Porsche 996 C4 3.6L 2000>>
Porsche 996 C4 3.4L 2001>>
Porsche 996 C4 3.6L 2002 - 2004
Porsche 996 C4S 3.6L 2002- 2005

Porsche 997 C2 3.6L 2005 M96.05
Porsche 997 C2S 3.8L 2005 M97.01**
Porsche 997 C4 3.6L 2005 M96.05
Porsche 997 C4S 3.8L 2005 M97.01**
**Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

Porsche Boxster 986 2.5L 1997 - 1999
Porsche Boxster 986 2.7L 2000 - 2003
Porsche Boxster 986 2.7L 2004 - 2005
Porsche Boxster S 986 3.2L 2000 - 2005
Porsche Boxster 987 2.7L / 3.2L / 3.4L

**M96 Engine only 

Fits engine types: Carrera 996 M96 engines, Boxster 986 M96 Engines, Boxster 987 M96 Engines, Carrera 997 M96 & M97.01 **Engine (3.8) number up to M97/01 68509790 has the older IMS bearing (this product fits) and Engine number from M97/01 68509791 has the larger revised IMS. (this product does not fit)

IMS Eternal Fix retro fit kit installs in-car without removal or disassembly of the engine required. The Cylindrical Bearing with Thrust Control design has a load capacity 5 times greater than the inferior, failure prone, Ball Bearing solutions on the market!

Why Cylindrical is Best?
Cylindrical Bearings have very high load bearing capacity, 5 times more than Ball Bearing. Cylindrical Bearings are used in, High Temp & Low Viscosity Lubrication such as Automatic Transmissions. They can carry extreme lateral pressure without wear to the friction surfaces. This is because the bearing friction surface is flat not concave.

For More Information CLICK HERE

For Installation Instructions CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102EPS

您正在查看的产品与这些编号存在交叉引用关系

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610590102TOOL

您正在查看的产品与这些编号存在交叉引用关系

Large IMS bearing for DOF

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610599677

您正在查看的产品与这些编号存在交叉引用关系

Magnetic oil drain plug, with a seal ring (washer).
Hard Anodized Aluminum, with magnet, 18 x 1.5mm



Fits:
Porsche 996 1997-04
Porsche 997 2005-08
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

A magnetic sump oil drain plug is a type of oil drain plug that contains a small magnet designed to attract and capture metallic particles that may be present in your engine's oil. While this type of drain plug is not exclusive to Porsche and can be used in various vehicles, it can provide several benefits, including:

Improved Engine Longevity: The magnet in the drain plug helps to capture tiny metal particles, such as iron, steel, or aluminum, that may circulate in the engine oil. Removing these particles can reduce wear and tear on engine components, potentially extending the engine's lifespan.

Enhanced Engine Performance: By reducing the presence of contaminants in the oil, a magnetic drain plug can help maintain the oil's lubricating properties, which is crucial for smooth engine operation. Clean oil can also contribute to improved fuel efficiency.

Early Detection of Problems: As the magnetic drain plug collects metallic debris, it can serve as an early warning system. By inspecting the drain plug during oil changes, you can get an idea of the engine's condition and detect any unusual wear or damage before it becomes a major issue.

Reduced Maintenance Costs: Regularly inspecting and cleaning a magnetic drain plug can prevent larger issues from developing over time. Addressing potential problems early can save you money on more extensive repairs down the road.

Peace of Mind: Knowing that you are taking steps to protect your engine from premature wear and tear can give you peace of mind as a vehicle owner. It's a relatively inexpensive and simple modification that can provide added assurance.

Easy Installation: Magnetic drain plugs are typically straightforward to install. They often replace the existing drain plug and require no special tools or modifications.

While magnetic drain plugs can offer these benefits, it's essential to remember that they are not a substitute for regular oil changes and proper maintenance. Regular oil changes with the appropriate oil and filter are still crucial for the health and longevity of your engine. Additionally, magnetic drain plugs may not capture all types of contaminants, so they should be seen as a supplementary measure rather than a comprehensive solution.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90021900930

您正在查看的产品与这些编号存在交叉引用关系

旋装式机油滤清器

适合：

保时捷 986/987 以及 996/997 车型，可替换保时捷零件号 996 107 020 53（54、55）。适用于发动机型号为 M96 或 M97 的 MY97-08 车辆。
不适合 GT2、GT3 或 Turbo 型号或任何风冷型号。仅针对配备 M96/M97 发动机的 MY97-08 车辆设计。

保时捷 987.2 MY09+ Boxster 和 Cayman 车型

保时捷 955 Cayenne S V8 和 955 Cayenne Turbo MY03-06

Oil Filter Spin-on Type (Short type)

Fits:

Porsche 986/987 as well as 996/997 models and replaces Porsche part numbers 996 107 020 53 (54, 55). For MY97-08 vehicles with M96 or M97 engine designation.
Does not fit GT2, GT3, or Turbo models or any aircooled models. Design only for MY97-08 vehicles with an M96/M97 engine.

Porsche 987.2 MY09+ Boxster and Cayman models

Porsche 955 Cayenne S V8 and 955 Cayenne Turbo MY03-06

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

OC1051

您正在查看的产品与这些编号存在交叉引用关系

Oil pan protective plate.



Fits:
Porsche 996 >>1999

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610798100

您正在查看的产品与这些编号存在交叉引用关系

油底壳挡板套件 X51 动力套件风格。



适合
保时捷 986 Boxster
保时捷 987 Gen 1 Boxster / Cayman - >>2008 年

保时捷 996 Carrera 2 / Carrera 4 / Carrera 4S
保时捷 997 Gen 1 Carrera 2 / Carrera S / Carrera 4 / Carrera 4S - >>2008 年

EBS Racing X51 款 M96/M97 油底壳挡板套件与标准油底壳（无深油底壳延伸）配合使用，是一款重型全金属结构油底壳挡板，适用于 2008 年款之前的所有 Boxster、996 和 997 发动机，涡轮增压和 GT3 车型除外。

这款 CAD 设计和精密制造的油系统增强组件可在运动驾驶过程中将更多的油保持在应在的位置；在皮卡周围。为了从第一天起就保持稳定的性能，我们使用了不会像工厂那样变质或弯曲的金属门。EBS油挡板组件可轻松安装在任何工厂油底壳上，并附带硬件和安装说明，便于安装。

套件包括
EBS Racing M96/97 油挡板组件
LC5900密封胶
6x10mm 锯齿法兰螺栓 - x3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-00.6

您正在查看的产品与这些编号存在交叉引用关系

Underdrive pulley.
replacement for OE 99710224101



Fits on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), DFI engines, GT2, GT3 and Turbo.

The RSS Harmonically Damped Underdrive Pulley is ideal for engines that are running light weight flywheels, engines that are built - bored/stroked and engines that are driven hard.

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.
• Dampens/reduces internal engine harmonics for improved engine performance, efficiency and longevity.
• Recommended for street or track use

Installation tool (wrench) and new OEM Pulley Washer included:

Dyno Image shows HP & TQ gain on 2005 997.1 Carrera S:
Baseline Dyno Run Mods: OEM Crank Pulley, OEM Software, Cargraphic Headers, Hi flow 200 Cell Cats, and Medium Sound Cargraphic Sport Mufflers
Modified Dyno Run: Added RSS Pulley (Part #608) to baseline car with existing mods:
+16 HP / +8 ft lbs TQ

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 608 Kit)
Please add Drive Belt for Under Drive Pully cars WITH Aircon Porsche 996/ Boxster 986/997 99610215199/1

MADE IN USA

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

608

您正在查看的产品与这些编号存在交叉引用关系

Underdrive Pulley for Porsche 996/997/Boxster 986
Replacement for OE 99610211562, 99610511563,



The RSS Lightweight High Strength Underdrive Pulley is made from 6061-T6 aluminum. A must for any street or track enthusiast

• Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator without detrimental effects on said ancillary systems.

• Installation wrench included.

• Works on all Porsche 986, 996, 987, 997 models EXCEPT 2.9L (multi hole crank pulley pattern), 3.8L, DFI engines, GT2, GT3 and Turbo.

*** NOTE: We recommend using/sourcing a new OEM Crank Shaft Pulley Bolt for your specific vehicle when installing the RSS Pulley. (Not Included with 601 Kit)

Please read fitting instructions before purchase.


**Please note you will need a new shorter Pully Belt
99610215199/1
Under drive pulley w/ air conditioning - 2100mm

99610215198/1
Under drive pulley w/o air conditioning - 1905mm

Underderive Pulley Installation Instructions - CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

601

您正在查看的产品与这些编号存在交叉引用关系

适用于 MY97-08 发动机的旋装式机油滤清器适配器。
需要 K&N 过滤器 HP-1007

适合：

1997 年至 2008 年间的保时捷发动机

The Supplemental Tool kit is required for installation of the Single Row and Dual row IMS Solution and also for M96 /MY06-08 Upgrade - kit 106-08.30

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

106-08.21

您正在查看的产品与这些编号存在交叉引用关系

TRS Backflow Preventer (BFP) Remote Filter Adapter with integrated check valve & fittings.

Fitment:
Porsche 986 Boxster / Boxster S 1997 – 2004
Porsche 987 Boxster / Boxster S 2005 – 2008
Porsche 987C Cayman / Cayman S 2006 – 2008
Porsche 996 (911) Carrera / Carrera 4S 1998 – 2004
Porsche 997 (911) Carrera / Carrera S / Carrera 4S 2005 – 2008


PATENT PENDING. MADE IN U.S.A.

More and more we hear about connecting rod bearings seizing or cylinders becoming scored and destroying Porsche M96 and M97 engines. This all has to do with poor lubrication on banking and high speed corners which can result in high engine oil temperature and oil pump starvation. Introducing our newest component, the backflow preventer (BFP).

Our Remote Oil Filter Adapter Backflow Preventer (BFP) goes directly in place of the original factory oil filter canister allowing for ease of installation of lubrication & pressure accessories such as oil pressure compensator(s), external oil cooler(s) and a larger, metal oil filter element. Our (BFP) also eliminates restrictive filter size spin on oil filter adapters and sandwich plate options by combining the two into one component & integrating a backflow check valve. Two key benefits here is our (BFP) will provide a greater ground clearance allowing for a much larger remote mounted filter to be placed, which will provide a better oil filtration and flow for the engine assembly, as well as the ability to connect & install multiple oil lubrication & cooling accessories.

Some spin-on oil filter kits currently on the market go in place of the original filter canister area, eliminating the possibility of having multiple oil system accessories, forcing you to use either an oil cooler delete plate with external oil cooler, a spin on "sandwich adapter" in conjunction with the spin on filter adapter to connect an accessory OR nothing at all with simply a smaller filter. This will also create ground clearance issues having multiple components sandwiched together with the inclusion of the oil filter, especially on lowered vehicles. The only way to prevent a ground clearance issue on this setup is to use the smallest filter possible. If a spin on filter adapter & sandwich plate are used without the inclusion of a spin on oil filter, ground clearance will not be the issue at hand; the connection of multiple oil lubrication accessories becomes limited and the greater number of items to purchase increases to have the same oil kit solutions found with our (BFP) stage kits. A remote oil filter adapter and filter will still need to be placed. Save time and money with our (BFP).

A sandwich adapter combo with the spin-on oil filter will also require the use of an external oil check valve which has a maintenance life and will need to be replaced overtime. The (BFP)'s integrated check valve has a lifetime service life eliminating the need to replace a check valve.

Smaller filters are a lot more restrictive on their filtration and will have decreased service intervals. Compared to the original factory oil filter element and other smaller spin-on oil filters, the larger oil filter found on our (BFP) kits diminishes dry starts under cold cranking conditions due to its low restriction design & internal anti-drain back valve assuring immediate oil flow. The larger filter also has a greater burst pressure of up to 500psi designed to take pressure spikes in race engines that have higher oil pressure.

Simple. Easy. Reliable.

BBi Autosport under drive pulley.



Fits
Porsche 996 Turbo
Porsche 996 GT2
Porsche 996 GT3 MK1 and MK2
Porsche 996 GT3RS
Porsche 997 Gen 1 Turbo
Porsche 997 Gen 1 GT2
Porsche 997 Gen 1 GT3

Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track.

The pulley is fully balanced and is a 16% reduction. Its weight has been optimized to be 1/2 that of any other under-drive pulley on the market today.
An additional benefit is increased power and torque across the entire RPM range.

A boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size. Comes complete with the crank pulley and a new smaller belt

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBIPULLEY9967

您正在查看的产品与这些编号存在交叉引用关系

Lightweight Under drive Pulley is made from 6061-T6 aluminium. Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator.

Pulley outer diameter: 123mm (measured from ribs to ribs)

Increase your engine output by reducing the draw of the engine's ancillaries ie the power steering pump, Air Conditioning, water pump and alternator by slowing them down and reducing the horsepower they use.

Underdrive pulley is one of the cheapest returns for the money spent when it comes to actual performance and horsepower gains for track and street use cars.

Installation tool (wrench) included, new OEM crankshaft pulley bolt is recommended but not included with this product.

Replacement Pulley for Original Porsche parts No. 99610211563

Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987
Porsche Cayman 987C

**Please note you will need a new shorter Pully Belt which you can purchase from us.
99610215199/1
Under drive pulley w/ air conditioning - 2100mm

99610215198/1
Under drive pulley w/o air conditioning - 1905mm

Underderive Pulley Installation Instructions - CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3609001601

您正在查看的产品与这些编号存在交叉引用关系

160F Low Temperature Thermostat HOUSING WITH INSERT & Gasket for 986 as well as 996 models and replaces the factory 186F thermostat insert, Porsche part numbers 996 106 125 52 (53). Also fits 987 and 997 models to 2008. Does not fit MY09+ DFI engines.



Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2, C4
Porsche 987 Boxster 2005>>
Porsche 997 2005-08

Price includes new low temperature thermostat insert manufactured in Germany by one of the same manufacturers that makes the oe thermostat insert, allowing you to reuse your original housing. Provides increased cooling capacity increasing power while ensuring consistent performance and extending engine-component longevity.

Installation recommended only by trained Porsche technician or Porsche service department using genuine Porsche coolant.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 5, 6 & 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系

160F 低温恒温器外壳，无垫圈/密封件，适用于 986 和 996 型号，可更换原厂 186F 恒温器插件，保时捷零件号 996 106 125 52 (53)。还适用于 2008 年之前的 987 和 997 型号。不适合 MY09+ DFI 发动机。

#埃尔林#

适合：
保时捷 986 Boxster 1997-2004
保时捷 996 C2、C4
保时捷 987 Boxster 2005>>
保时捷 997 2005-08

价格包括由生产原装恒温器插件的同一制造商在德国制造的新型低温恒温器插件，允许您重复使用原始外壳。提供更高的冷却能力，提高功率，同时确保一致的性能并延长发动机部件的使用寿命。

仅建议由经过培训的保时捷技术人员或保时捷服务部门使用原装保时捷冷却液进行安装。

单击“放大”可查看大部件图。
图表参考编号 5, 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99610601361

您正在查看的产品与这些编号存在交叉引用关系