Front Carbon-Ceramic Brake Disc and Pad Package. Porsche 992.2 Carrera 2S / Carrera 2 GTS / Carrera 4 GTS 2024>>  ❭  9M992615301ACKIT

Front carbon-ceramic brake disc and brake pad package by Ninemeister for Porsche 992.2 Carrera 2S, Carrera 2 GTS and Carrera 4 GTS models from 2024 onwards. It combines two-piece floating front discs with a compatible low-metallic road pad compound.

Fits

• 992.2 Carrera 2S 3.0L 2024>>
• 992.2 Carrera 2 GTS 3.6L 2024>>
• 992.2 Carrera 4 GTS 3.6L 2024>>
  
  

What This Product Does

This package provides matched front carbon-ceramic friction components for replacing worn or damaged discs and pads. The discs are designed as direct replacements for the OEM PCCB carbon-ceramic system with option code M450, while Ninemeister also identifies the discs as suitable steel-disc replacements. The included pad specification is intended solely for use with carbon-ceramic brake discs.

Functions

• Renews the front brake disc and pad friction surfaces together.
• Provides a compatible road pad compound for carbon-ceramic discs.
• Supports consistent low-to-medium friction characteristics.
• Reduces unsprung weight compared with conventional cast-iron discs.
• Uses a floating two-piece construction to accommodate repeated thermal cycles.
• Produces less brake dust than a typical cast-iron disc and pad combination.

Technical Details

• Front disc dimensions: 410 × 36 mm.
• Two-piece floating carbon-ceramic disc construction.
• Carbon-fibre long-strand material reinforced with silicon carbide.
• CNC-machined 7075-T6 billet aluminium centre bells with a hard-anodised finish.
• Manufacturer-stated disc weight: 7 kg.
• Road pads use a low-metallic, resin-bonded material containing steel and aramid fibres.

Symptoms of Fault

• Brake judder or vibration through the pedal or steering wheel.
• Reduced initial brake response or an inconsistent pedal feel.
• Visible disc chipping, cracking or surface deterioration.
• Brake pads approaching their wear limit.
• Unusual squealing, scraping or grinding noises.
• Uneven wear across the front brake components.

Why Replacement Matters

Carbon-ceramic discs and their matching pads should be inspected as a complete friction system. Renewing compatible discs and pads together helps avoid mixing unsuitable compounds and provides a consistent maintenance baseline across the front axle. Calipers, wear sensors, hoses and fitting hardware should also be inspected before installation. Follow the brake component manufacturer’s bedding-in procedure after fitting.

FAQs

• Are the pads compatible with iron brake discs?
  No. Ninemeister specifies these road pads for carbon-ceramic brake discs only.
• What size are the front discs?
  Each disc specification is 410 × 36 mm.
• Does this package replace the original PCCB system?
  The discs are identified as direct replacements for OEM PCCB front discs with option code M450.
• Are wear sensors and fitting hardware included?
  These items are not specified, so compare the package contents with the vehicle and planned installation before work begins.
• Should the brakes be bedded in?
  Yes. Use the procedure supplied for the discs and pad compound and avoid heavy braking until bedding-in is complete.