Air Induction Kit Porsche 964 1990-94 6-8 HP More  ❭  964167002

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera 2/4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera 2/4/4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera 2/4 (345bhp) 05/2002>>

Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33-2786

The product you are viewing cross references to these numbers

BMC Air Filter.



This Product Fits:
Porsche 911 (996) 3.4 Carrera 2/4
Porsche 911 (996) 3.6 Carrera 2/4
Porsche 911 (997) 3.6 Carrera 2/4
Porsche 911 (997) 3.8 Carrera 2S /4S

Panel Filter Size:
- width - 171/128mm
- height - 3528mm


BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FB156

The product you are viewing cross references to these numbers

K&N Air Induction Kit for Porsche 996 / 997 3.6L

Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models
Porsche 997 C2 / C4 2005>>
3.6L Engines

Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive air box and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected moulded from cross link polyethylene which has the lowest thermal conductivity rating of any single-layered mould-able material available on the market today. This is key in keeping intake temperatures low and increasing power.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

57-7000

The product you are viewing cross references to these numbers