ARKYN FALCON-1 Weaved Carbon Fiber Roof Box - 398L  ❭  FLC-1

ARKYN FALCON-1  Forged Carbon Fiber Roof Box

Carbon fiber construction lightweight, rigid, and distinctive.
Dimensions: 213 × 88 × 37 cm
Aerodynamic: minimal drag and wind noise 
Volume: 398 L

Made from 100% genuine carbon fiber, the FALCON-1 Roof box redefines performance storage. Lightweight, aerodynamic, and designed with precision – it adds both function and statement to your car.

Available Finishes:
• High Gloss Carbon – deep shine with a premium mirror-like effect.
• Matte Carbon – refined elegance with a stealth-inspired look.

What's inside:
•  Carbon Roof box
•  Strap-down belts - to secure your luggage safely inside the Roof box
•  Clamping system - to mount the roof box securely on your roof racks


Details under the surface

Inside the FALCON-1 - Every detail is engineered to protect what you carry. A scratch-resistant microfleece lines the entire interior, keeping your gear safe and silent even on long drives. All mounting points are covered with precision-fit panels, hiding every bolt and screw for a clean, seamless look. No rattles. No exposed hardware. Just a refined interior built to match the performance on the outside.

Forged Carbon High Gloss - Raw power, refined to perfection. Our high gloss forged carbon explodes with depth and character, turning every angle into a statement of precision and performance

Forged Carbon Matte - A stealth aesthetic born from controlled chaos. Our forged matte carbon blends aggressive texture with a low-reflection finish for a bold, understated performance look.

Not sure if it fits your car?

Our standard FALCON-1 mounting system is built to fit any commercially approved roof rack — no exceptions, no special adapters, no hidden fine print. If your vehicle has certified roof rails or crossbars, the box locks right in.

But what if your car doesn’t support roof racks at all?

That’s exactly why we developed our Motorsport mount. It uses certified high-load suction cups, the same technology trusted in professional automotive and film industries, giving you a secure, track-tested solution that works on almost any vehicle, even those with no official mounting points.

In short: whether your car welcomes traditional roof racks or absolutely refuses them, there’s a mounting solution that fits—and holds.

Vehicles currently not compatible

Our suction-cup mounting system is engineered exclusively for standard automotive tempered glass. It must not be used on thin lightweight glass, reduced-thickness glazing, motorsport-grade lightweight rear windows, or polycarbonate/acrylic panels. These materials cannot withstand the vacuum pressure and localized load created by suction cups—using the system on such surfaces may lead to damage or cracking.

For this reason, all Porsche GT models are currently excluded from compatibility. Their ultra-thin rear glass offers no structural margin for certified suction mounting, and the Motorsport Mount also requires a fully accessible rear window without add-ons or aerodynamic attachments.

We are actively developing alternative solutions, but for now, Porsche GT models remain outside the safe operating limits of our system.

Does the carbon fiber construction actually improve vehicle handling?

Absolutely. Unlike conventional plastic boxes that flex and create a shifting center of gravity, the structural rigidity of the FALCON-1 minimizes vibrations. Its lightweight carbon shell reduces the impact on your vehicle’s handling, ensuring that performance remains a priority, even when fully loaded.

What is the recommended maximum speed with the ARKYN carbon roof box?

While the FALCON-1 is engineered for high-speed stability and aerodynamic integrity, your maximum speed is governed by your vehicle manufacturer's roof load specifications and the rating of your roof rack system. However, its aerodynamic profile is designed to remain silent and stable well beyond the limits of standard boxes.

Is the FALCON-1 compatible with sports cars that lack roof rails?

Yes. For performance cars without traditional mounting points, we developed the ARKYN Motorsport Mount. This vacuum-sealed system from SeaSucker allows for a secure, low-profile installation on vehicles like the Porsche 911 or Tesla Model S, preserving the car’s silhouette.

What is the difference between Regular Carbon and Forged Carbon finishes?

It is a matter of aesthetic DNA. Regular Carbon features the iconic 3K Twill weave. Symmetrical and technical. Forged Carbon offers a marbled, organic look pioneered by hypercar manufacturers. Both offer identical structural performance and UV protection.

Is the box waterproof for winter sports?

Yes. The FALCON-1 features a precision-engineered overlapping shell design and high-quality seals to ensure your gear stays dry, whether you're driving through alpine snowstorms or coastal rain.

How much weight can I load into the roof box?

We recommend a maximum load of 50 kg for using the box with roof racks, depending on your vehicle’s roof load limit. Always check your manufacturer’s specifications before mounting, especially if you are using the Motorsport mount.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FLC-1

The product you are viewing cross references to these numbers

ARKYN Motorsport mount

The Motorsport mount allows you to install your ARKYN Roof box directly onto your Sports car – using professional-grade suction mounts by SeaSucker®. No roof rails. No compromises.

Each mount is engineered to handle high speeds, aerodynamic forces, and the demands of track-inspired vehicles. With its modular design, the Motorsport mount keeps your setup clean, low, and secure – without sacrificing the lines of your car.

Perfect for Sports cars and all vehicles where standard roof racks aren’t an option.

Included: 8x SeaSucker ® vacuum mount (set)
Compatibility: FALCON-1 Carbon Roof box
Finish: Shadow Black or Racing Red
Installation: Quick setup, no permanent  fixtures


Not sure if it fits your car?

Our standard FALCON-1 mounting system is built to fit any commercially approved roof rack — no exceptions, no special adapters, no hidden fine print. If your vehicle has certified roof rails or crossbars, the box locks right in.

But what if your car doesn’t support roof racks at all?

That’s exactly why we developed our Motorsport mount. It uses certified high-load suction cups, the same technology trusted in professional automotive and film industries, giving you a secure, track-tested solution that works on almost any vehicle, even those with no official mounting points. In short: whether your car welcomes traditional roof racks or absolutely refuses them, there’s a mounting solution that fits—and holds.

Vehicles currently not compatible

Our suction-cup mounting system is engineered exclusively for standard automotive tempered glass. It must not be used on thin lightweight glass, reduced-thickness glazing, motorsport-grade lightweight rear windows, or polycarbonate/acrylic panels. These materials cannot withstand the vacuum pressure and localized load created by suction cups—using the system on such surfaces may lead to damage or cracking.

For this reason, all Porsche GT models are currently excluded from compatibility. Their ultra-thin rear glass offers no structural margin for certified suction mounting, and the Motorsport Mount also requires a fully accessible rear window without add-ons or aerodynamic attachments.

We are actively developing alternative solutions, but for now, Porsche GT models remain outside the safe operating limits of our system.

Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defective. Delivery time is normally 6 - 8 weeks.

ARKYN Roof box Pull strap

The ARKYN Roof box Pull strap is designed to make closing and handling your Roof box effortless. Built from high-strength webbing with an ergonomic grip element, it ensures comfort and control every time you use it.

Key Features:
 •  Durable construction – heavy-duty strap with reinforced stitching
 •  Ergonomic grip – specially designed end piece for secure handling
 •  Integrated carabiner hook – quick and reliable attachment
 •  Optimized length (395 mm) – perfect balance of reach and control
 •  Lightweight design – adds convenience without bulk.

A subtle yet essential accessory – engineered for everyday usability and a premium ARKYN experience.

Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defective. Delivery time is normally 6 - 8 weeks.