Bilstein B6 FRONT shock absorbers & fittings set Porsche 986 Boxster 09/1996>>  ❭  22-046215KIT.1

Bilstein B6 front shock absorbers and fittings set for Porsche Boxster 986 models (2.5, 2.7 and 3.2 S) from 09/1996, suitable for cars with standard suspension or the M030 sport option.

What This Product Does
Bilstein B6 dampers are uprated gas-pressure shock absorbers developed to work with standard ride height on many Porsche applications. On a Boxster 986, they are commonly chosen to tighten body control and improve composure compared with tired original dampers while remaining appropriate for everyday road use.

Functions

• Controls front suspension movement over bumps and uneven surfaces
• Works with existing springs to support correct ride height and geometry
• Helps maintain tyre contact with the road during braking and cornering
• Limits excessive pitch and roll caused by worn or ageing dampers
• Contributes to predictable steering response when the chassis is in good condition
• Integrates with original-style mounts and hardware where specified

Symptoms of Fault

• Front end feels floaty, bouncy or slow to settle after bumps
• Notable dive under braking or increased body roll
• Knocking noises from the front, once mounts and bushes have been checked
• Uneven or accelerated front tyre wear linked to poor damping
• Visible leaks, corrosion or damage on existing front dampers
• Car feels less stable in quick direction changes than expected

Why Replacement Matters

• Ageing front dampers are common on Boxster 986 models and can make the chassis feel loose even if other components are sound
• Refreshing front shock absorbers is a frequent step when owners restore steering precision and overall suspension condition
• Replacing tired units at the same time as arms, bushes and top mounts helps avoid repeat labour and inconsistent behaviour
• Using application-specific Bilstein units supports correct fitment on Porsche platforms
• Maintaining effective damping at the front axle is important for balanced braking and predictable handling characteristics

Fits

• Boxster 986/987/981 (1997–2016)
• Boxster 986 2.5L 1997–99
• Boxster 986 2.7L 1999–02
• Boxster S 986 3.2L 1999–02
• Boxster 986 2.7L 2003–04
• Boxster S 986 3.2L 2003–04

FAQs

• Q: Can these be used with standard springs?
  A: Bilstein B6 dampers are generally intended to work with standard-ride-height springs on many Porsche models; confirm against the specific application details.
• Q: Do both front dampers need to be replaced together?
  A: It is usual practice to renew dampers in axle pairs so left and right sides behave consistently.
• Q: Is an alignment check recommended after fitting?
  A: Geometry should normally be checked after suspension work to confirm correct settings.
• Q: Should top mounts and bushes be changed at the same time?
  A: Many owners replace worn mounts and associated hardware during damper replacement to reduce noise and make the most of the new parts.

Support & Advice
Check fitment for your specific Boxster 986 (model year, engine and suspension option) before ordering, and inspect related suspension components so any additional wear can be addressed during the same job.