Brembo Sport brake pads for Porsche Boxster 986 / Boxster 987  ❭  07B31436

Brake Pad size: Width: 114mm / Thickness: 16mm / Height: 73mm
Information about
Brake Pad Size

This Product Fits:

Porsche Boxster (987) 2.7ltr, 2.9ltr, 3.4ltr
Porsche Boxster (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Boxster (718) 2.0ltr, 2.5ltr Rear
Porsche Boxster Spyder (718) 4.0ltr Rear

Porsche Cayman (987) 2.7ltr, 2.9ltr, 3.4ltr Rear
Porsche Cayman (981) 2.7ltr, S 3.4ltr, GTS 3.4ltr 04.2012>> Rear
Porsche Cayman (718) 2.0ltr, 2.5ltr Rear
Porsche GT4 (718) 4.0ltr Rear

Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.

Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.

Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

07B31536

The product you are viewing cross references to these numbers

Titanium Brake pad heat shields, Front.

This Product Fits:

Porsche 981, 718 Cayman base, S and GTS (2.5L turbo)
does not fit GT4 or GTS 4.0 cars

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material, has low thermal conductivity. This means that it is very bad at transferring heat. Which is good if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from loosing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)