Chrome top of door trims kit for Porsche 356 pre A Cabriolet. › NLA53143119

The OE MATCH Door Handle Seal, Small is a high-quality replacement sealing gasket designed to fit between the exterior door handle and the vehicle door panel. Manufactured to OE specifications, this small door handle seal helps prevent water, dirt, moisture, and contaminants from entering behind the door handle assembly while providing a neat, factory-correct finish.
Sold Each.

Fits:

• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988

• Cracked, split, or perished rubber seal
• Water ingress around the door handle area
• Moisture accumulation inside the door cavity
• Visible gaps between the handle and body panel
• Hardened, shrunken, or distorted seal material
• Corrosion or paint damage around the handle mounting area
• Loose-fitting door handle assembly
• Deteriorated exterior appearance

• Restores a weather-resistant seal around the door handle
• Helps prevent water intrusion and moisture-related damage
• Protects door internals from dirt and corrosion
• Maintains factory-correct fit and finish
• Improves the appearance of the exterior door trim
• Supports restoration and refurbishment projects
• Helps preserve surrounding paintwork and body panels
• Provides durable OE-quality performance and long-term reliability

The OE MATCH Door Seal, For Coupe Models is a high-quality replacement weather seal set designed specifically for classic Porsche coupe models. Installed around the door aperture, these seals create a weather-tight barrier between the door and bodywork, helping to prevent water, wind, dust, and road noise from entering the cabin.

Fits:

• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988  

Manufactured to OE specifications from durable automotive-grade rubber, these door seals provide excellent fitment, flexibility, and long-term resistance to UV exposure, temperature fluctuations, and environmental wear. They are an essential replacement for restoration projects or when original seals have become worn, hardened, or damaged.

What This Product Does:

• Creates a weather-tight seal around the door opening
• Prevents water ingress into the cabin
• Reduces wind noise while driving
• Helps keep dust, dirt, and road debris out of the interior
• Improves cabin comfort and refinement
• Supports proper door closure and alignment

• Water leaks into the cabin during rain
• Increased wind noise at speed
• Visible cracks, splits, or perishing of the rubber
• Flattened, compressed, or distorted seal profile
• Difficulty achieving a proper door seal
• Dust or moisture entering the vehicle interior
• Hardened or shrunken rubber material
• Visible gaps between the door and bodywork

• Restores a weatherproof seal around the door aperture
• Helps prevent water damage to carpets, trim, and interior components
• Reduces wind noise and improves cabin refinement
• Prevents dust, dirt, and moisture ingress
• Maintains proper door fitment and closure characteristics
• Protects against corrosion caused by trapped moisture
• Enhances vehicle comfort and driving enjoyment
• Provides OE-quality fit, durability, and long-term reliability

Door Seal for CABRIOLET

Fits

• Porsche 944 Cabrio
• Porsche 968 Cabrio 1992–95
  
  If you require the 968 COUPE LEFT/RIGHT version use this: Link
  
  

Side selection: 94153709110 is the LEFT door seal; 94153709210 is the RIGHT door seal. These are alternative side-specific parts

Check fitment for your specific vehicle (model, year, engine) before ordering.

What Is This Part?

This is the flexible rubber weather seal at the door opening. Its shaped section contacts the surrounding bodywork when the door closes, helping maintain a continuous barrier along the sealing surface. On a Cabriolet, it works alongside the separate window and roof seals, so the condition and alignment of adjoining components also matter. Porsche technical information identifies these exact references as the left and right door seals for the 944 S2 & 968 Cabriolet. 


What Does This Part Do?

• Limits water entry: Closes the gap at the door opening to help keep rainwater outside.
• Reduces draughts: Maintains contact between the door and body sealing surfaces.
• Helps control wind noise: Restricts air passing through gaps caused by damaged or poorly seated rubber.
• Protects interior trim: Helps limit moisture reaching the sill and adjacent cabin materials.
  
  These functions depend on the seal retaining its shape and making consistent contact when the door is closed. 
  
  Why Replace This Part?

Ageing rubber can harden, split, shrink or remain flattened after repeated compression. When the seal no longer follows the opening or presses against its mating surface, gaps can allow water and air into the cabin. Replacement is appropriate where inspection confirms deterioration that cleaning or reseating cannot resolve. 

A leak does not automatically mean the door seal has failed. Door alignment, window adjustment, neighbouring seals and blocked drains can produce similar symptoms. Check these areas before replacing the seal, particularly if the rubber remains supple and undamaged. 

When to Replace This Part?

• Visible deterioration: Cracks, tears, brittle sections or damaged sealing edges.
• Permanent deformation: Flattened or distorted sections that no longer contact the mating surface.
• Poor seating: Sections that lift away or cannot be retained correctly after inspection.
• Confirmed leakage: Water tracks or draughts traced to a damaged section of the door seal.
• During repair: Damage discovered when the existing seal is removed or the door opening is inspected.

Inspect seal seating and contact pressure as well as the rubber itself; poor alignment can prevent an otherwise serviceable seal from working correctly. 

Where Is This Part Fitted?

Location: At the door perimeter, where the seal contacts the body shell around the door aperture. Select the left or right reference to match the side being repaired. 

FAQs

• Will a new seal cure every door-area leak? No. Check door and glass alignment, adjoining seals, internal water shields and drainage before deciding which component needs attention. ()
• Can seal conditioner repair damaged rubber? Suitable care products can help maintain flexibility, but cannot repair tears or restore a permanently damaged profile. 
  
  Product Summary

• Product: Door seal.
• Brand: Porsche.
• Left reference: 94153709110.
• Right reference: 94153709210.
• Purpose: Weather sealing between the closed door and body opening.
• Selection: Confirm body style and side before ordering.