Please wait…

Please wait while we process your order,
do not press the back button…

Porsche Cayenne 9PA (955) 2003-2006 955 Cayenne S 4.5L V8 2003-06 Gearbox / Transmission CV Joints Kits

CV joint kit. Porsche 911 / 965 / 964 C2 / 993 C2 / 986 Boxster S / 996 › 91133292301

Check vehicle fitment

OE Match

91133292301/3

Product Information

Constant velocity (CV) joint kit by OE Match for selected Porsche 911, 965, 964, 993, Boxster 986 S and 996 applications. Supplied specifications state 28 wheel-side internal teeth and a 108 mm seal diameter.

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

Fits

Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

A constant velocity joint carries drive through the driveshaft while accommodating changes in angle as the suspension moves. This kit provides a replacement for a worn joint rather than a complete driveshaft assembly.

Functions

Transmits torque through the driveshaft connection.
Accommodates angular movement during suspension travel.
Maintains consistent rotational speed across the joint.

Technical Details

Supplied reference: 91133292301. Internal diagrams also identify joint reference 91133203001.
Wheel-side internal teeth: 28. Seal diameter: 108 mm.
911 1984–86 diagram: CARRERA G15.72/73 and TURBO G30.36/37. For 1987–89, diagram quantities are 2 for CARRERA and 4 for TURBO, CARRERA M491; these are assembly quantities, not kit contents.
964 diagram identification: CARRERA 2 M249CARRERA RS, quantity 2; TURBO, note -92, quantity 2. The 993 diagram records quantity 2.

Symptoms of Fault

Joint wear may cause clicking, acceleration-related vibration, excessive play or a knock as drive takes up. Escaped grease around a damaged boot also warrants inspection. Similar symptoms can arise from mounts or other drivetrain components, so confirm the cause before replacement.

Why Replacement Matters

Renewal addresses wear within the joint when the shaft remains serviceable. A split boot can allow lubricant loss and contamination; inspect the joint, shaft splines, boots and associated fixings together before deciding on the repair.

FAQs

Is a boot-only repair sufficient?
It may be suitable if inspection confirms that the joint remains lubricated, quiet and unworn. Existing noise or play requires further assessment.

Which lubricant is required?
Use CV-joint grease specified for the application. Confirm the kit contents and fitting requirements before starting work.

What should be checked alongside the joint?
Inspect driveshaft splines, boots, mounting hardware and powertrain mounts, particularly when investigating vibration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133292301

91133292301

302303

91133203001

14-146044

501SU001NA

The product you are viewing cross references to these numbers

Related products

CV Joint and Boot Kit Front Outer. Porsche 955 / 957 Cayenne

95534990103/2

Product Information

Front Outer CV Joint & Boot Kit - fits Left or Right Hand Side

Restore smooth power delivery and eliminate drivetrain vibration with this Outer CV Joint & Boot Kit. This complete kit replaces the front outer constant velocity (CV) joint located on the wheel side of the front axle, restoring factory drivetrain performance and reliability.

Fits:

Porsche 955 Cayenne 3.2L V6 2003-06
Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007-10
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne S / GTS 4.8L 2007-10
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10

Diagram ref no 12

Manufactured to OE specifications using precision-machined, high-strength components, this kit is supplied complete with a durable protective CV boot and the essential installation components required for a professional repair. Whether replacing a worn CV joint following boot failure or carrying out preventative maintenance, this OE Match kit provides the quality, fitment and durability expected from a factory-style replacement.

Technical Specifications

Fitting Position: Front Axle.
Fitting Position: Outer (Wheel Side).
Joint Type: Constant Velocity (CV) Joint.
External Teeth (Wheel Side): 30.
Internal Teeth (Wheel Side): 27.

Complete CV Joint & Boot Kit. Manufactured to OE specifications.

What Does the Front Outer CV Joint Do?

The front outer CV joint transfers engine torque from the driveshaft to the front wheel while allowing both steering movement and suspension travel.

It performs several important functions:

Delivers smooth engine power to the front wheels.
Allows full steering articulation.
Accommodates suspension movement over uneven road surfaces.
Maintains constant rotational speed through varying steering angles.
Minimises vibration throughout the drivetrain.
Ensures smooth acceleration and reliable four-wheel-drive performance.

A properly functioning CV joint is essential for maintaining the driving refinement and traction expected from the Porsche Cayenne.

Why Replace the Front Outer CV Joint?

The outer CV joint operates under constant load while being exposed to water, road dirt and extreme steering angles. If the protective boot becomes damaged, grease escapes and contaminants quickly enter the joint, causing accelerated wear.

Replacement is recommended if you notice:

Clicking noises while turning.
Vibration during acceleration.
Split or leaking CV boot.
Grease thrown onto the suspension or inside of the wheel.
Knocking noises from the front axle.
Excessive driveshaft movement.
Rough or noisy drivetrain operation.

Replacing the complete joint and boot assembly prevents further damage to the driveshaft and restores smooth power transmission.

Symptoms of a Worn Front Outer CV Joint

Common warning signs include:

Clicking or cracking noises on full steering lock.
Vibration under load.
Clunking when accelerating or changing direction.
Torn CV boot.
Grease leaking from the boot.
Excessive play within the driveshaft.
Reduced drivetrain refinement.

Ignoring these symptoms can eventually lead to complete CV joint failure and loss of drive to the affected wheel.

Benefits

Installing this OE Match Front Outer CV Joint & Boot Kit provides:

Restores smooth drivetrain performance.
Eliminates clicking and knocking noises.
Reduces drivetrain vibration.
Restores efficient power transfer.
Protects against dirt and moisture contamination.
Excellent OE-quality fit and finish.
Durable construction for extended service life.
Ideal for preventative maintenance and drivetrain repairs.

Installation Recommendations

Professional installation is recommended.

While replacing the front outer CV joint, inspect the following components:

Inner CV joint.
Complete driveshaft assembly.
Driveshaft retaining bolt or nut.
Wheel bearing.
Wheel hub splines.
Front suspension bushes.
Lower ball joints.
Front differential output seals.
ABS sensor and reluctor ring.

Always use the correct high-performance CV joint grease supplied with the kit and tighten all fasteners to Porsche's specified torque settings for optimum durability and reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534990103

95534990102

95534990103

95534990100

95534990101

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

CV joint kit. Porsche 911 / 965 / 964 C2 / 993 C2 / 986 Boxster S / 996 › 91133292301