Please wait…

Please wait while we process your order,
do not press the back button…

Ship to United States

+44 208 500 8811

Your Vehicle // Porsche // Panamera 970 MK2 (2014-2016) // 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16

PorschePanamera 970 MK2 (2014-2016)970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16Engine Rebuild PartsCylinder Head / Camshaft Carrier

Cylinder head gasket, 1.68 mm, 3 holes. Porsche 958 Cayenne / 95B Macan / 970 Panamera 3.0L Diesel › 95810417

4 4 4 4

Check vehicle fitment

OE Match

95810417

Product Information

This OE Match cylinder head gasket is the 1.68 mm, three-hole version, it seals the joint between the cylinder head and engine block, containing combustion pressure and separating oil and coolant passages.

Fits

Porsche 958 Cayenne 3.0L Diesel 2011–18
Porsche 970 Panamera 3.0L Diesel 2011–16
Porsche 95B Macan 3.0L Diesel 2014–18

Check fitment for your specific vehicle (model, year, engine) before ordering. Confirm the required cylinder bank, part reference and gasket thickness.

Diagram ref no 12 (cyl. 4-6) or 13 (cyl. 1-3)

What Is This Part?

The cylinder head gasket forms the sealing interface beneath the cylinder head. The head bolts clamp it between the mating surfaces, where it seals around the combustion chambers and fluid openings. Its effectiveness depends on the condition of those surfaces and the correct installation procedure. It is renewed during cylinder head removal and relevant engine rebuilding work.

What Does This Part Do?

Contains combustion pressure: Seals the combustion chambers at the head-to-block joint.
Seals coolant passages: Helps keep coolant within its intended circuit.
Seals oil passages: Helps contain lubricating oil where it passes through the joint.
Separates engine circuits: Maintains sealing boundaries between combustion gases, oil and coolant.

Why Replace This Part?

A failed gasket can allow combustion gases or fluids to cross the joint. Overheating, distorted surfaces or incorrect clamping can contribute to failure; replacing the gasket alone will not correct these underlying problems. Renew it when the head is removed, checking surface condition and following the engine-specific fitting procedure.

When to Replace This Part?

Confirmed leakage: Testing identifies a leak through the head gasket.
Fluid contamination: Oil and coolant mixing requires investigation.
Cooling-system pressure: Combustion gases are detected in the coolant.
Visible damage: Inspection reveals burnt sealing areas or damaged surfaces.
Head removal: Fit a new gasket during reassembly. These indications require diagnosis rather than proving gasket failure on their own.

Where Is This Part Fitted?

Location: Between the cylinder head and engine block on the applicable bank of the V6 diesel engine. Cylinder-bank applications cover cylinders 1–3 or 4–6 according to the selected reference; confirm the required version before fitting.

Technical Details

Thickness: 1.68 mm.
Identification: Three holes.

FAQs

How do I confirm the thickness?
Check the identification holes and follow the engine manufacturer's selection procedure, including piston-protrusion measurements where required.
Does overheating automatically mean the gasket has failed?
No. Diagnose the cooling system and check the head and block before deciding on the repair.

Product Summary

Product: Cylinder head gasket.
Brand: OE Match.
Specification: 1.68 mm, three-hole identification.
Selection checks: Engine application, cylinder bank and gasket reference.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810417

95810417430

95810417431

95810417330

95810417331

The product you are viewing cross references to these numbers

Related products

Cylinder head gasket, Cyl. 1-3. Porsche 958 Cayenne / 970 Panamera / 95B.1 Macan

94610417303/1

Product Information

This OE Match cylinder head gasket is for cylinders 1–3, It seals the joint between the cylinder head and engine block, containing combustion gases and separating the oil and coolant passages.

Fits

Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
Porsche Panamera 3.6L 2011>>
Porsche Macan S / Turbo / GTS 2014>>

Check fitment for your specific vehicle (model, year, engine) before ordering. Confirm the cylinders 1–3 position against the existing gasket and exact engine specification.

Diagram ref no 34

What Is This Part?

A cylinder head gasket forms the sealing interface beneath the cylinder head. When the head is secured, the gasket is compressed between the mating surfaces to seal the combustion chambers and the fluid passages crossing that joint. This version is identified for cylinders 1–3, so the cylinder-bank application matters when selecting it for a repair. Effective sealing also depends on the condition of the head and block surfaces and the correct installation procedure.

What Does This Part Do?

Seals combustion pressure: Closes the head-to-block joint around the combustion chambers.
Seals coolant passages: Helps contain coolant where it passes between the block and cylinder head.
Seals oil passages: Helps contain the lubricating oil passing through the joint.
Separates engine circuits: Maintains sealing boundaries between combustion gases, coolant and oil.

Why Replace This Part?

Replacement may be needed when inspection confirms leakage or damage at the cylinder head joint. Overheating, distorted mating surfaces, incorrect positioning or inadequate clamping can compromise the seal. The underlying cause should be investigated rather than assuming that a new gasket alone will resolve the problem.

During cylinder head repairs, check surface condition, locating sleeves and fastening requirements before reassembly. Follow the engine-specific preparation and tightening instructions; a gasket cannot compensate for damaged or incorrectly prepared mating surfaces.

When to Replace This Part?

Confirmed joint leakage: Oil or coolant is traced to the head-to-block interface rather than a nearby seal or connection.
Combustion leakage: Testing identifies combustion gases escaping through the cylinder head joint.
Overheating damage: Inspection reveals gasket damage or distortion of the adjoining surfaces.
Visible gasket damage: Dismantling reveals burnt sealing areas, damaged openings or evidence of incorrect seating.

Where Is This Part Fitted?

Location: Between the engine block and the cylinder head serving cylinders 1–3, within the cylinder head assembly.

Technical Details

Cylinder position: Cylinders 1–3.
Macan engine/model identifiers: CTMA, CTM, CTLA, CTL, DCNA, DCN, DHKA, DHK.
Panamera 970 (G1) 3.6L engine/model identifiers: 4620, 4640, CWAA, CXNA.

FAQs

Does low compression automatically mean this gasket has failed?
No. Compression and leak-down testing can help establish the source of a sealing problem before dismantling or selecting replacement parts.
Should the cylinder head be checked during replacement?
Yes. Check the mating surfaces for damage and flatness, particularly after overheating, and follow the engine-specific repair instructions.

Product Summary

Product: Cylinder head gasket for cylinders 1–3.
Brand: OE Match.
Fitting position: Cylinder head-to-block joint.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417303

94610417302

94610417301

94610417303

The product you are viewing cross references to these numbers

Enter your VAT number here and click Verify:

Your Vehicle // Porsche // Panamera 970 MK2 (2014-2016) // 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16

Cylinder head gasket, 1.68 mm, 3 holes. Porsche 958 Cayenne / 95B Macan / 970 Panamera 3.0L Diesel › 95810417