Driveshaft Flange Short for PDK Gearbox CG205. Porsche 981 Boxster 2.7ltr / 981 Cayman 2.7ltr › 9G233220805

Driveshaft Flange for PDK Gearbox

This replacement driveshaft flange is designed for Porsche 981 Boxster and Cayman 2.7ltr models equipped with the CG205 7-speed PDK dual-clutch gearbox.

Fits:

• Porsche Boxster 981 2.7L 2012-16
• Porsche Cayman 2.7L 981 2013-16

Diagram Ref No 15 

Fitted to the right-hand side of the transmission, this short output flange connects the gearbox to the driveshaft, allowing engine power to be transferred to the rear wheels.

Not suitable for CG225 gearboxes, which use a different driveshaft flange.

Confirm the gearbox code and vehicle VIN before ordering.

What Does It Do?

The driveshaft flange provides the connection between the PDK gearbox output and the driveshaft.

As the gearbox transfers engine power, the flange rotates with the output shaft, allowing torque to pass through the driveshaft to the rear wheel.

Why Is It Important?

A correctly fitted driveshaft flange is essential for smooth and reliable power transfer.

A damaged or worn flange may cause:

• Vibration during acceleration
• Knocking or clunking from the drivetrain
• Excessive movement at the driveshaft connection
• Damage to associated transmission components

Why Does It Fail?

Common causes include:

• Wear at the driveshaft connection
• Damage from excessive drivetrain loads
• Corrosion or damaged mounting surfaces
• Incorrect installation or loose fixings
• Damage during gearbox or driveshaft removal

When Should It Be Replaced?

Replace the flange if it is cracked, distorted, excessively worn or has damaged mounting points.

It should also be inspected during driveshaft replacement, gearbox repairs or when unusual drivetrain vibration is present.

Checks & Installation

Inspect the driveshaft connection, retaining components and gearbox output seal before installation.

Ensure the flange is correctly seated and all fixings are tightened to Porsche specifications.

Professional installation is recommended.

Key Features

• Short driveshaft output flange
• Right-hand gearbox position
• Specifically for CG205 PDK transmissions
• Connects the gearbox output to the driveshaft
• Suitable for selected Porsche 981 Boxster and Cayman models
• Replacement for worn or damaged flanges

Porsche 981 Boxster & Cayman PDK Driveshaft Flanges

The Porsche 981 PDK transmission uses driveshaft output flanges to transfer power from the gearbox to the rear wheels. Worn or damaged flanges can cause drivetrain vibration, unwanted movement and problems at the driveshaft connection.

The short right-hand driveshaft flange is a replacement component for Porsche 981 Boxster and Cayman models equipped with the CG205 7-speed PDK gearbox.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9G233220805

The product you are viewing cross references to these numbers