Front bonnet damper. Porsche Taycan  ❭  PAD823359

Replacement front lid damper, Stops the lid falling. Hood lift supports—also known as gas struts—are pressurized cylinders that help hold your vehicle’s hood open safely. Over time, these supports can weaken as internal pressure drops. Exposure to extreme temperatures, dust, and other contaminants can accelerate wear. Cold weather is especially tough on gas struts, often reducing internal pressure and causing the hood to feel heavier or difficult to keep open.

Fits:
Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)

Signs Your Hood Lift Support Is Failing

• The hood feels heavier or no longer stays open as high as it used to, often due to internal gas leakage.
• Visible grease or oil leaking from the lift supports.
• Creaking, squeaking, or seeping noises when raising the hood or trunk.
• The hood or trunk no longer stays open on its own after lifting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151133100

The product you are viewing cross references to these numbers

Replacement heavy duty lid damper, Stops the lid falling.

Restore safe, smooth and reliable bonnet operation with this Heavy Duty Bonnet Strut / Damper designed for Porsche 911 and Porsche 912 models. Engineered to provide superior lifting assistance and secure bonnet support, this upgraded heavy-duty strut helps prevent the bonnet from dropping unexpectedly while making access to the luggage compartment easier and safer.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

The bonnet strut, sometimes referred to as a bonnet damper, gas strut or lift support, is responsible for supporting the weight of the front bonnet once opened. Using internal gas pressure, the strut assists with lifting and holds the bonnet securely in position during maintenance, inspections and everyday use.

Over time, bonnet struts naturally lose pressure and become less effective, causing the bonnet to feel heavier, fail to remain open or suddenly drop without warning. Replacing worn bonnet dampers is an important maintenance task that improves both convenience and safety.

This heavy-duty version offers enhanced lifting performance and increased support compared to ageing original units, making it particularly suitable for restored vehicles, regularly driven classics and cars fitted with additional bonnet-mounted equipment.

What Does a Bonnet Strut Do?

The bonnet strut is designed to assist with opening and supporting the front bonnet. It uses compressed gas within a sealed cylinder to counterbalance the bonnet's weight, reducing the effort required to lift it while holding it securely in the open position.

A properly functioning bonnet strut helps provide:

Smooth bonnet opening and closing Secure bonnet support when raised Improved safety during maintenance Reduced strain on hinges and mounting points Convenient access to the luggage compartment Greater confidence during servicing and inspections

When Should a Bonnet Strut Be Replaced?

Bonnet dampers gradually weaken as the internal gas pressure decreases with age and use. Environmental conditions, temperature fluctuations and long-term storage can accelerate wear.

Common signs that a bonnet strut requires replacement include:

Bonnet slowly drops when open Bonnet will not remain fully open Increased effort required to lift the bonnet Visible oil leakage from the damper Reduced lifting assistance Sudden bonnet closure during maintenance Excessive play or wear in the mounting points

Replacing a worn bonnet strut restores safe operation and helps protect both the vehicle and the user from accidental bonnet closure.

Features & Benefits

Heavy duty bonnet strut / damper Suitable for Porsche 911 models Suitable for Porsche 912 models Provides reliable bonnet support Smooth and controlled bonnet operation Improved lifting assistance compared to worn original units Helps prevent accidental bonnet closure Durable construction for long service life Ideal for restoration, maintenance and everyday use

Keep your classic Porsche safe and practical with this Heavy Duty Bonnet Strut / Damper from Design911.

Premium Porsche Bonnet Support Components

Design911 supplies a comprehensive range of Porsche bonnet struts, bonnet dampers, gas springs, lift supports and body hardware components for classic and modern Porsche models. Whether you're restoring an early Porsche 911, maintaining a Porsche 912 or replacing worn bonnet support components, our range helps ensure safe and reliable bonnet operation.

Bonnet struts are often overlooked maintenance items, yet they play a vital role in vehicle usability and safety. A properly functioning bonnet damper keeps the bonnet securely supported while providing smooth opening and closing action.

Replacing weak or leaking bonnet struts can dramatically improve everyday convenience and reduce the risk of accidental bonnet closure during maintenance.

Why Replace Porsche Bonnet Struts?

As bonnet dampers age, the internal gas pressure gradually decreases, reducing their ability to support the bonnet safely.

Benefits of replacing worn bonnet struts include:

Improved safety during maintenance Smooth bonnet operation Reliable bonnet support Reduced strain on bonnet hinges Enhanced convenience and usability Prevention of accidental bonnet closure Improved restoration quality and originality       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95951133300

The product you are viewing cross references to these numbers

Damper Swivel Pin. To be used with speed clip Ref: N0126452

Fits:
Porsche 911 1965-73
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9991660430C

The product you are viewing cross references to these numbers