Goodridge Stainless steel brake hose set SPR0900-4C. Porsche 986 Boxster › SPR0900-4C

Goodridge stainless steel brake hoses.
Sold as a set of 4

Fits:
Porsche 911 1970-73

High Performance Brake line race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. Stainless steel brake lines provide a more responsive and firm brake pedal by eliminating the "spongy" feel that often accompanies stock rubber brake lines.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPR0160-4P

The product you are viewing cross references to these numbers

The OE Match brake hose retaining clip holds the brake hose end fitting in its mounting bracket. It is replacement retaining hardware for the Porsche applications listed below, suitable for attention during brake hose repairs or restoration work.

Fits

• Porsche 914 (1970–1976)
• Porsche 914 1.7–2.0 01/69–02/76
• Porsche 968 3.0L 1992–94
• Porsche 968 Sport 3.0L 1994–95
• Porsche 968 CS 3.0L 1993–95
• Porsche 968 Turbo S 3.0L 1993–94
• Porsche 968 3.0 06/91–11/95
• Porsche 964 (911) C2 1989–93
• Porsche 964 (911) C4 1989–93
• Porsche 964 (911) RS 3.6L 1991–93
• Porsche 964 (911) TURBO 3.3L 1991–93
• Porsche 964 (911) TURBO 3.6L 1991–93
• Porsche 964 3.3–3.6 12/88–06/94
• Porsche 911 1965–1968 2.0L / 912 SWB (F)
• Porsche 911 1968–1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974–1977 2.7L / 1976–77 3.0 Carrera
• Porsche 911 1975–1977 3.0L Turbo (930)
• Porsche 911 1978–1989 3.3L Turbo (930)
• Porsche 911 1984–1986 3.2L
• Porsche 911 1987–1989 3.2L G50
• Porsche 911 1978–1983 3.0L / SC
• Porsche 911 2.0–3.3 01/63–07/89
• Porsche 356B 1959–63
• Porsche 356C 1963–65
• Porsche 356 B/C 1.6 01/59–12/65
• Porsche 912 1.6 01/65–02/70

Check fitment for your specific vehicle (model, year, engine) before ordering.

Required Quantity

• Porsche 911 1970–73: 4 retaining springs in the brake hydraulic assembly.
• Porsche 911 1974–77 without brake booster: 4 retaining springs in the brake-line assembly.
• Porsche 911 1978–83, 1984–86 and 1987–89: 2 retaining springs in the front brake-line assembly and 2 in the rear brake-line assembly.

What Is This Part?
This is the retaining spring used at a brake hose mounting point. The hose end fitting sits in a bracket, and the clip keeps it seated there while the flexible hose accommodates movement. It forms part of the hose mounting arrangement alongside the bracket and connected rigid brake pipe. Its role is mechanical retention; the hydraulic connection itself must also be correctly assembled and checked. 

What Does This Part Do?

• Retains the hose fitting: Keeps the end fitting seated in its mounting bracket.
• Restrains unwanted movement: Helps prevent the fitting moving out of its supported position.
• Completes the mounting arrangement: Works with the bracket to secure the hose at the connection to the rigid brake pipe. 

Why Replace This Part?
Replace the clip if inspection finds significant corrosion, cracking, distortion or a loss of grip that prevents it retaining the fitting correctly. Damage during removal can also leave a clip unsuitable for refitting. A new clip should be considered on its condition, rather than automatically replaced whenever other brake components are serviced.

If the hose fitting is loose, inspect the bracket and fitting as well as the clip. Worn or damaged supporting parts may prevent secure seating even with replacement retaining hardware.

When to Replace This Part?

• Corrosion: Heavy rust or material loss has weakened the clip.
• Visible damage: The clip is bent, cracked or distorted.
• Poor retention: The clip no longer holds the fitting securely after the mounting arrangement has been checked.
• Missing hardware: The correct retaining clip is absent from a mounting point.
• Removal damage: Inspection during hose replacement shows that the existing clip cannot be refitted securely.

Where Is This Part Fitted?
Location: At the brake hose end fitting where it is retained in a mounting bracket beside the rigid brake pipe connection. Applicable Porsche 911 installations include front and rear brake-line assemblies; the exact mounting points depend on the vehicle. 

Product Summary

• Product: Brake hose retaining clip / retainer spring.
• Brand: OE Match.
• Reference: 803611715.
• Purpose: Retains the brake hose fitting in its mounting bracket. ()

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

803611715

The product you are viewing cross references to these numbers

Stainless steel braided brake hose kit.
Sold as a SET OF 4.

Fits:
Porsche 911 & 911 Turbo All Models 1973 - 1989

Black Diamond hoses are made as close to oe specification as possible and many applications come complete with line locators using high specification hose with stainless steel over braid to hold the strength of the hose.

Using Black Diamond braided brake hoses will give you a superbly firm and controllable brake pedal action.