Hex head bolt with washer M12x1,5x62 rear caliper mounting. Porsche Macan  ❭  PAF911268

FRONT Brake caliper mounting bolt, M14 x 1.5 x 135
Genuine Porsche OE front brake caliper mounting bolt for selected Porsche 970 Panamera, 958 Cayenne, 9YA Cayenne and 95B Macan models. This original Porsche caliper bolt is used to secure the front brake caliper to the suspension upright / hub carrier, helping maintain correct caliper alignment and safe braking performance.
Sold individually, 2 bolts required per caliper

Fits:
Porsche 970 Panamera 3.6L / 3.0L Hybrid 2009 - 2016 (Front) with Ceramic brakes (PR:450)
Porsche 970 Panamera S 4.8L 2009 - 2016  (Front) with Ceramic brakes (PR:450)
Porsche 970 Panamera GTS 4.8L 2009 - 2016 (Front) without Ceramic brakes 
Porsche 970.1 Panamera Turbo 4.8L V8 2009 - 2013 (Front)

Porsche 958 (92A) Cayenne 2011 - 2018
 * PR: 1LH - Rear disc brake - disc diameter 19 inches, brake caliper painted red
 * PR: 1LV - Front disc brake - 20-inch disc diameter plus brake caliper painted Yellow (PCCB)
 * PR: 1LX - Front disc brake - disc diameter 20 inch, brake caliper painted yellow (PCCB)
 * PR: 1LY - Front disc brake - 19-inch disc diameter, brake caliper painted Yellow (PCCB)

Porsche 9YA Cayenne 2018 - 2023
 * PR: 1LC / 1LI - Front disc brake, disc diameter 19 inches, brake caliper painted Silver
 * PR: 1LL -  Front disc brake, disc diameter 19 inches, brake caliper painted Green
 * PR: 1ZL - Front disc brake, 19-inch disc diameter, brake caliper painted red, North America
 * PR: 1ZN - Front disc brake, disc diameter 19-inches, brake caliper painted Red (RoW)
 * PR: 1ZQ - Front disc brake, disc diameter 19 inches, brake caliper painted Black
 * PR: 1ZI - Front disc brake, Brake caliper, white (PSCB), disc diameter 20"
 * PR: 1ZU - Front disc brake, disc diameter 20 inches, brake caliper painted Green (PSCB)
 * PR: 1ZP - Front disc brakes, PSCB, high-gloss black (EXC)

Porsche 9YA.2 Cayenne 2023 >> 
 * 19", black / green caliper, PR: 1LD/1ZM/1ZH/1ZJ - Disc brakes in front
 * 20", black / red caliper, PR: 1LJ/1LV/1ZB/1ZC/1ZE/1ZQ - Disc brakes in front
 * 20", red caliper, PR: 1ZD/1LE/1LF/1LH/1LW/1ZF - Disc brakes in front

Porsche 95B.1 Macan 2014 - 2018
 * PR: 1LH - Rear disc brake - disc diameter 19 inches, brake caliper painted red
 * PR: 1LY - Front disc brake - 19-inch disc diameter, brake caliper painted Yellow (PCCB)

Porsche 95B.2 Macan 2018 - 2021
 * white brake caliper,  PR: 1ZZ - Disc brakes in front
 * yellow brake caliper, PR: 1LY - Disc brakes in front

Porsche 95B.2 Macan 2022>>
 * PR: 1ZZ / 1LK - Disc brakes in front
 * PR: 1ZP - Disc brakes in front (Geomet D)
 * yellow brake caliper, PR: 1LY - Disc brakes in front

Diagram ref no 9

This product supersedes Porsche's old part numbers:  99907346101, WHT004572

This bolt is used on selected Porsche front brake caliper applications where an M14 x 1.5 x 135 mm caliper mounting bolt is specified.

What This Part Does / Functions
• Secures the front brake caliper to the hub carrier / suspension upright
•  Maintains correct caliper alignment over the brake disc
•  Helps prevent caliper movement under braking load
•  Supports safe and consistent braking performance
•  Provides correct OE Porsche thread, length and fastening specification
•  Replaces a damaged, corroded, stretched or previously removed bolt
•  Maintains factory brake system fitment and quality
•  Supports correct installation during front brake caliper service.

Why Replace This Part?
Brake caliper mounting bolts are safety-critical fasteners. They are exposed to high braking loads, heat cycles, road debris, corrosion and repeated service removal. If a bolt is stretched, damaged, corroded, rounded or incorrectly reused, it may not clamp the brake caliper securely. Replacing it with a Genuine Porsche OE front caliper mounting bolt helps ensure the caliper is secured using the correct Porsche factory-specified hardware.

When to Replace This Part
•  When removing or replacing a front brake caliper
•  During front brake caliper refurbishment or overhaul
•  If the original bolt is corroded, seized, rounded or damaged
•  If the bolt threads are worn, stretched or contaminated
•  If caliper mounting hardware is missing or incorrect
•  During front brake disc, pad or caliper service where replacement is recommended

Where It Fits on the Car
This bolt fits at the front brake caliper mounting point. It secures the front caliper to the suspension upright / hub carrier. Correct torque specification and Porsche workshop procedure must always be followed during installation.

Brake caliper mounting hardware is safety-critical and should be fitted by a competent technician.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF004572

The product you are viewing cross references to these numbers

Brake Caliper Mounting Bolts. M14 x 1.5 x 48.
2 x Bolts required per Caliper. Fits: FRONT Calipers.



Fits:
Porsche Macan (option code: I1LA) 2014>>
* I1LA - For cars with 17" wheels and BLACK calipers

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF911476

The product you are viewing cross references to these numbers

Brake Caliper Mounting Bolts. M14 x 1.5 x 115.
2 x Bolts required per Caliper. Fits: FRONT Calipers.



Fits:
Porsche Macan Mk1 (option code: I1LB/I1LF/I1LG/I1ZK) 2014>>
* I1LB / I1LF - For cars with 18" wheels and SILVER calipers
* I1LG / I1ZK - For cars with 18" wheels and RED calipers

Porsche Macan Mk2 / Mk3 2019 Onwards
Option Codes
* 1LN - Front brake discs for min. 18" wheels, black calipers
* 1ZT
* 1ZK - Front disc brakes 18", red calipers
* 1LG - Front disc brakes 18", red calipers
* 1LU
* 1LP


Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF004571

The product you are viewing cross references to these numbers