iCarsoft CR PRO+ Multi-Brand All-System Diagnostic Scanner (With Bi-Directional Control)  ❭  CRPRO+

Engineered for professional mechanics, DIY enthusiasts, and multi-car households, the iCarsoft CR Pro+ is a comprehensive, bi-directional, all-system diagnostic tool. It supports 48 professional service-reset functions alongside master-level vehicle analysis, giving you complete control over your vehicle’s health with zero hidden costs.

✓ Advanced Bi-directional Control
✓ 48 Service Functions
✓ CAN-FD Supported
✓ Lifetime Free Updates

1.      Worldwide Vehicle Coverage: 

for Mercedes-Benz, for Maybach, for BMW, for Mini, for Rolls-Royce, for Chrysler, for Dodge, for Jeep, for Daewoo, for Abarth, for Fiat, for Lancia, for Alfa Romeo, for Ferrari, for Maserati, for Ford (US Ford, EU Ford, AU Ford), for G.M., for Holden, for Acura, for Honda, for Hyundai, for KIA, for Isuzu, for Jaguar, for Land Rover, for Mazda, for Mitsubishi, for Infiniti, for Nissan, for Nissan GTR, for Opel, for Vauxhall, for Porsche, for Citroen, for DS, for Peugeot, for Dacia, for Renault, for Renault-Samsung, for Saab, for Smart, for Sprinter, for Subaru, for Suzuki, for Lexus, for Scion, for Toyota, for Audi, for Bentley, for Bugatti, for Lamborghini, for SEAT, for Skoda, for VW, for VW CV, for VW LT3, for MAN Light-Duty, for Volvo.

"Don't see your car? Send us your VIN and we'll confirm within 24h."

2.      Practical Hardware Design

The iCarsoft CR Pro+ features a vibrant 4.3-inch screen and intuitive button navigation for quick, effortless menu browsing. It comes with a dedicated TF card reader, so you can update the software and vehicle database from your PC — no Wi-Fi required.

3.      Lifetime Free Software Upgrades

Unlike other OBD scan tools on the market that require annual subscription fees, the CR Pro+ offers lifetime free software upgrades.

4. Supports the Latest CAN-FD Protocol

CAN-FD (Controller Area Network – Flexible Data-rate) is a next-generation automotive communication protocol adopted by today’s modern cars. It is supported on 2020-and-newer GM and Chrysler models.

5. Advanced Bi-directional Control

The CR Pro+ goes beyond reading codes. With full bi-directional control, you can command individual components and watch them respond in real time — cycle the ABS pump motor, run window regulators, activate the fuel pump, open the throttle, and run output tests on almost every onboard module. Pinpoint the faulty part in minutes, without trial-and-error.

6. Fast AutoVIN Identification:

Skip the manual VIN typing — simply plug in, and the tool identifies your vehicle in seconds. No typos, no extra lookup time. This boosts accuracy, eliminates input errors, and makes every scan faster and more reliable.

7. Supports 15 Languages

The universal OBD scanner CR Pro+ supports English, German, French, Dutch, Spanish, Czech, Swedish, Russian, Hungarian, Norwegian, Portuguese, Italian, Polish, Danish, and Finnish.

8. 48 Comprehensive Service Functions

The CR Pro+ is far more than a basic code reader. It integrates 9 commonly-used service functions for daily maintenance and 39 advanced professional functions for complex repair tasks.

▸ 9 Hot Service Functions covering your daily maintenance needs.

Oil Reset (For 57 vehicle makes):

Allows you to reset the engine oil life system, service lamp, service mileage, and service intervals after an oil change.

Electronic Throttle Control (For 56 vehicle makes):

Relearns throttle valve control parameters after resetting or replacing the throttle body.

EPB-Brake-Pad Reset (EPB) (For 53 vehicle makes):

Retracts the electric parking brake calipers and resets the brake pads after replacement.

Steering Angle Reset (SAS) (For 57 vehicle makes):

Calibrates the steering wheel to the straight-ahead position, or recalibrates the SAS after steering component replacement.

DPF Regeneration (For 54 vehicle makes):

Performs DPF regeneration, component replacement initialization, and DPF relearning after engine control unit replacement — for diesel particulate filter systems.

Injector Coding (For 54 vehicle makes):

Relearns the injector control parameters when an injector is renewed or replaced.

ABS Bleeding (For 53 vehicle makes):

Bleeds air from the system to restore ABS brake response, or performs a relearn procedure after ABS replacement.

Air Suspension Service (For 22 vehicle makes):

Supports calibration, height adjustment, system reset, and fault code clearing for air suspension systems. Lets you precisely set ride height, perform system initialization, and resolve common air suspension faults.

Battery Management Service (BMS) (For 48 vehicle makes):

Evaluates the battery charge state, monitors closed-circuit current, registers battery replacement, and activates the vehicle's sleep mode.

▸ 39 High level service functions for professional technicians:

TPMS Reset (For 56 vehicle makes):

Allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

Air Conditioner Service (For 22 vehicle makes):

Supports routine maintenance of A/C modules, including A/C system adaptation reset, compressor reset, compressor break-in, and stepper motor initialization.

Head Lamp Service (For 44 vehicle makes):

Initializes the adaptive headlamp system.

Body Stability Control Service (For 35 vehicle makes):

Supports routine maintenance of DSC modules, including resetting or deleting adaptation values, and initializing the unit.

Engine Control Service (For 48 vehicle makes):

Supports routine maintenance of engine modules, including resetting or deleting adaptation values, and calculating fuel consumption.

Transmission Control Service (For 48 vehicle makes):

Supports routine maintenance of transmission modules, including resetting adaptation values and transmission fluid level adaptation.

Air-Bag Reset (For 29 vehicle makes):

Resets airbag data to clear the airbag (SRS) warning light after a collision.

Seat Service (For 34 vehicle makes):

Calibration after repairing or replacing the seat position drive motor.

Immobilizer Service (For 40 vehicle makes):

Anti-theft Matching, disable any lost keys and add new keys. ONLY for vehicles with basic Immobilizer system.

Engine Idle Service (For 37 vehicle makes):

Adjusts the engine idle speed.

Door-Window-Roof (For 34 vehicle makes):

Learns the top position of the door window glass, enabling pinch protection and the one-touch-up function.

Fuel Pump Service (For 30 vehicle makes):

Activates the fuel pump after replacement.

Air Filter Control Service (For 8 vehicle makes):

Initiates the self-learning process after replacing the air filter.

ODO Meter Reset (For 16 vehicle makes):

Reads odometer values stored in multiple ECUs (for service and verification purposes).

Door Service (For 20 vehicle makes):

Performs full calibration after window lift motor repair or replacement.

Turbocharger (For 33 vehicle makes):

Performs turbocharger learning after component replacement, or resets stored learned values.

Exhaust Gas Recirculation (For 38 vehicle makes):

Recirculates a portion of engine exhaust gas back into the intake system.

Engine Cylinder Service (For 26 vehicle makes):

Performs inspection, maintenance and diagnosis of the engine cylinder system.

Engine Correction Service (For 1 vehicle make):

Performs engine module data calibration.

AdBlue (For 40 vehicle makes):

Resets the AdBlue (urea) level counter after the diesel exhaust fluid is refilled or replaced.

Clutch Matching (For 39 vehicle makes):

Learns the clutch contact point and engagement position where the clutch begins to transmit engine torque. Applicable after ECU replacement, transmission removal/replacement, or clutch replacement. For adaptive clutches only.

Electronic Water Pump (For 13 vehicle makes):

Activates the electronic water pump for testing or after replacement.

Crankshaft Learning (For 20 vehicle makes):

Performs crankshaft position learning and related calibration after engine repair.

High Voltage Battery (For 26 vehicle makes):

Supports EV/hybrid high-voltage battery maintenance, including replacement adaptation and status monitoring.

Cruise Control System (For 23 vehicle makes):

Performs adaptive cruise control (ACC) calibration and personalization.

Language Setting (For 24 vehicle makes):

Changes the vehicle's system language.

Radar/Camera (For 38 vehicle makes):

Performs radar and camera learning and calibration (ADAS).

Vehicle Setup (For 21 vehicle makes):

Personalize your vehicle’s driving and comfort preferences.

Cylinder Shutoff Test (For 13 vehicle makes):

Tests each engine cylinder individually by disabling its fuel supply — useful for diagnosing cylinder-specific issues such as misfires or low compression.

Speed Limit Assist (For 26 vehicle makes):

Sets or removes the vehicle's maximum speed limit.

Head-Up Display (For 6 vehicle makes):

Used for learning and calibration of heads-up display.

Cylinder Misfire Check (For 13 vehicle makes):

Identifies engine misfires, addressing issues like sluggish acceleration, high fuel consumption and severe vibration.

Control Unit Reset (For 29 vehicle makes):

Performs full reset and initialization of vehicle control units after part replacement or fault repair, clearing stored data and restoring normal module operation.

O2S (Oxygen Sensor) (For 35 vehicle makes):

Supports oxygen sensor replacement adaptation and initializes the three-way catalytic converter learned values.

Seat Belt (For 28 vehicle makes):

Performs seatbelt pretensioner reset and related maintenance after airbag deployment.

Gas Particulate Filter (For 4 vehicle makes):

Performs service operations including GPF replacement and regeneration.

NOx Sensor (For 29 vehicle makes):

Resets NOx sensor-related learned values (e.g., catalytic converter parameters) stored in the ECU.

Rain-Light Sensor (For 18 vehicle makes):

Calibrates the rain sensor after windshield replacement or sensor renewal.

Stop And Start (For 22 vehicle makes):

Set up the automatic start-stop function in ECU.

Additional service functions are available in the Miscellaneous section.

⚠ Compatibility Notice: The specific diagnostic service functions vary by vehicle brand, model, production year, and ECU configuration.

9. Powerful Full Systems Diagnostics

In addition to the four standard systems (Engine, ABS, Airbags, and Transmission), the CR Pro+ provides diagnostic coverage for more complex vehicle systems.

• Read and Clear DTCs

• Read ECU Information

• Read Live Data

• Access all ECU modules via OBDII-16 DLC

• Read and Clear Freeze Frame Data

10. Full OBD2 Test Modes — Emission-Ready

Supports all 10 OBD2 test modes for vehicles compliant with 1996+ OBDII/EOBD/JOBD/KOBD/CAN/CAN-FD standards: Read Codes, Erase Codes, I/M Readiness, Live Data, Freeze Frame, Vehicle Information, O2 Monitor Test, On-Board Monitor Test, EVAP System Test, and Pending Codes.

11. Older Vehicle Connection Extensions

The smart auto diagnostic tool CR Pro+ also supports Mercedes-Benz models (with the 38-pin adapter), early BMW models (with the 20-Pin adapter) and Sprinter vans (with the 14-pin adapter). The corresponding iCarsoft adapters are available separately.

12.Support Diagnostic History and Report printing

Users can quickly access previously tested vehicle systems and save, share, and print diagnostic reports.

Diagnostic data can also be printed for future reference by connecting the device to a Windows PC via USB.

13. Product Specifications:

Display

4.3-inch TFT LCD color screen with 800x480 resolution

Connectivity

USB 2.0 / OBDII

Power

9-18V

Type C Input

5V / 500mA

Power Consumption

2.4W (Typical)

Operating Temp.

0 to 50°C (32 to 122°F)

Storage Temp.

-20 to 70°C (-4 to 158°F)

Operating Humidity

5% - 95% non-condensing

Dimensions (W x H x D)

205 × 113 × 31 mm (8.07 × 4.45 × 1.22 in)

Net Weight

  ≈ 400 g

Supported Automotive Protocols

ISO 9141-2, ISO 14230-2, ISO 15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO 11898 (High-speed, Medium-speed, Low-speed, and Single-wire CAN), CAN-FD, SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6

14.Packing List:

• Main Unit

• Carry Case

• OBD2 Main Cable (16-pin)

• USB-C Cable

• Multi-Language User Manual

• TF Card Reader

• Mercedes-Benz 38-Pin adapter (Optional - Sold separately)

• BMW 20-Pin adapter (Optional -  Sold separately  )

• Sprinter 14-Pin adapter (Optional -  Sold separately  )

Not sure which port your car has? Check compatibility by VIN or contact our support team.

FAQ:

Q1: Is the software updated regularly? Are updates free?    
A: Yes. CR Pro+ includes lifetime free software upgrades. No annual subscription required.  

Q2: What's the difference between CR Pro+ and the CR Pro?
A: Larger Screen: The upgraded CR Pro+ features a larger, clearer 4.3-inch display, whereas the older CR Pro comes with a smaller 4-inch screen.

More Service Functions: The CR Pro+ heavily expands your maintenance capabilities by supporting a much broader range of service reset functions compared to the foundational list on the standard CR Pro.

Q3: The CR Pro+ cannot recognize my vehicle by AutoVIN, does it mean the device is faulty?
A: Not necessarily. Send your VIN to our support team and we'll confirm AutoVIN compatibility within 24 hours. In the meantime, you can manually select your vehicle model — all diagnostic functions will still work normally. We'll add your VIN to our database in the next update.

 
Q4: DTCs can be read normally but fail to be cleared or reappear after clearance, why?
A: Please keep ignition on and engine off. Record freeze frame data first before clearing codes.

Persistent hardware faults need physical repair prior to code clearance.

Some fault codes of systems like SRS and ABS can only be cleared after finishing bi-directional tests.