Inner CV Joint Boot / Repair Set. Porsche 95C Macan-e 2024>>  ❭  PAD498201

Inner CV Joint Boot / Repair Set
This original Porsche repair set is designed for the inner CV joint area of the drive shaft, helping protect the joint, retain grease and prevent dirt, water and road debris from entering the drivetrain joint assembly.

Fits:
for Four-wheel drive models (option code: 1X1)
Porsche 95C Macan-e 4 Electric 2024>>
Porsche 95C Macan-e 4S Electric 2024>>
Porsche 95C Macan-e GTS Electric 2024>>
Porsche 95C Macan-e Turbo Electric 2024>>

Diagram ref no 3

The CV boot is a protective sealing component. It is exposed to suspension movement, road debris, water, salt, heat and age-related rubber deterioration. If the boot splits or loses its seal, grease can escape and contamination can enter the CV joint. Once the joint runs without lubrication or becomes contaminated, wear can develop quickly.

Replacing a damaged boot with a Genuine Porsche OE inner CV joint boot / repair set helps protect the drive shaft assembly and maintain proper drivetrain performance.

Common Symptoms of a Failed CV Boot
•  Grease visible around the drive shaft or suspension area
•  Split, cracked or torn rubber boot
•  Grease loss from the inner CV joint
•  Clicking, knocking or vibration if the CV joint has become worn
•  Dirt or water contamination inside the CV joint
•  Boot clamp failure or loose boot seating
•  MOT / roadworthiness failure due to damaged CV boot
•  Damage found during drivetrain or suspension inspection.

When to Replace This Part
•   If the inner CV boot is split, cracked or leaking grease
•   If the boot clamp has failed or the boot no longer seals correctly
•   During drive shaft repair or inspection
•   If the CV joint is being cleaned, repacked with grease or serviced
•   During suspension or drivetrain overhaul
•   After road debris, impact or service damage to the boot
•   Before CV joint wear develops from contamination
•   When restoring the drivetrain with Genuine Porsche parts.

Where It Fits on the Car
This repair set fits at the inner CV joint area of the drive shaft, where the shaft connects towards the drive unit / differential side. Correct installation requires proper cleaning, correct grease application, secure clamp fitment and inspection of the CV joint. If the joint has already been run without grease or has contamination damage, the CV joint or complete drive shaft should also be inspected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAD498201

The product you are viewing cross references to these numbers