MoS2 Leicht¬lauf 10W/40 20ltr. Porsche 911 / 964 / 924 / 944 / 968 / 928 / 914  ›  LM1089

MoS2 Leicht­lauf 10W/40 – 20ltr

LIQUI MOLY MoS2 Leichtlauf 10W-40 is a semi-synthetic low-friction engine oil formulated with molybdenum disulphide (MoS2) solid lubricant for additional protection against engine wear.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95

MoS2 forms a highly resistant lubricating film across rubbing and sliding metal surfaces inside the engine. Combined with the 10W-40 semi-synthetic base oil, this provides rapid lubrication during cold starts and helps reduce friction once the engine reaches operating temperature

What Does MoS2 Leichtlauf 10W-40 Do?

Engine oil creates a lubricating film between moving components, reducing direct metal-to-metal contact and helping control friction, heat and wear.

LIQUI MOLY adds MoS2 solid lubricant to provide an additional high-load lubricating film on internal friction surfaces. This is particularly beneficial during starting and warm-up, under heavy engine loads and in stop-start driving conditions.

The formulation is designed to provide:

• Excellent protection against wear
• Rapid lubrication after a cold start
• Reduced internal friction
• Good cold-start behaviour
• Excellent engine cleanliness
• Stable viscosity
• Good resistance to ageing
• Excellent emergency-running properties
• Reduced oil and fuel consumption

LIQUI MOLY describes the oil as a special development combining low-friction engine oil technology with the additional protection of MoS2 solid lubricant.

Why Use MoS2 Engine Oil?

Molybdenum disulphide is a solid lubricant that forms a protective lubricating film on metal surfaces. This provides an additional layer of protection alongside the conventional oil film.

This makes MoS2 Leichtlauf particularly suitable for engines where reducing friction and protecting heavily loaded internal components are priorities.

The oil can be used in petrol and diesel engines and has been tested for both turbocharger and catalytic converter compatibility. LIQUI MOLY particularly recommends it for vehicles without a diesel particulate filter.

Specifications

Viscosity: SAE 10W-40
Oil type: Semi-synthetic low-friction engine oil
Solid lubricant: Molybdenum disulphide (MoS2)

LIQUI MOLY recommends the product for applications requiring:

• ACEA A3
• ACEA B4
• API SL

Always follow the vehicle or engine manufacturer's required viscosity and oil specification before use.

Suitable Applications

LIQUI MOLY specifies MoS2 Leichtlauf 10W-40 for petrol and diesel engines, including naturally aspirated and turbocharged applications. It is particularly intended for vehicles without a soot/particulate filter and has been tested for compatibility with catalytic converters.

For Porsche applications, always confirm that SAE 10W-40 and the relevant performance specification are appropriate for the individual engine before use.

LIQUI MOLY MoS2 10W-40 Engine Oil for Porsche

Choosing the correct engine oil is essential for maintaining lubrication, controlling wear and protecting internal engine components. For Porsche engines where an SAE 10W-40 oil meeting the appropriate specifications is required, LIQUI MOLY MoS2 Leichtlauf combines semi-synthetic engine oil technology with additional molybdenum disulphide protection.

The MoS2 solid lubricant forms a high-load film on internal metal surfaces, complementing the conventional lubricating properties of the oil. LIQUI MOLY specifically highlights its protection during cold starting, warm-up, extreme loads and stop-start operation.

The product is available as LIQUI MOLY 2626 in a 1-litre container and LIQUI MOLY 2184 in a 5-litre container, allowing customers to select the quantity appropriate for servicing or topping up.

Design911 supplies LIQUI MOLY engine oils, lubricants and maintenance products for classic, air-cooled and modern Porsche models. Always check the required Porsche engine oil specification and viscosity for the individual model before ordering.