2.0ltr/2.5ltr to GT4 Rear Valance Conversion Non-Valved Exhaust System. Porsche 718 Boxster / Cayman  ›  9M982251052GT4

Sports exhaust rear silencer Porsche 95B.2 Macan S

These silencers / mufflers can only be fitted on cars produced from 2019 until the end of 2020. It should be checked that only one of the OE muffler has a single exhaust valve

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OBLIQUE CUT
Oblique-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 70mm
The value refers to the external dimensions of the exhaust end tip

END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 55mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TSPOMACU19.003.A

The product you are viewing cross references to these numbers

Non-Resonated Rear Sports Exhaust System 

Unleash a true performance exhaust note from your Porsche Macan 2.0ltr with this non-resonated rear sports exhaust system. Designed as a high-flow slip-on upgrade, this system replaces the heavy, restrictive OEM mufflers with a lightweight, free-flowing alternative that enhances both sound and performance.

This non-resonated version is engineered for maximum acoustic impact, delivering a louder, deeper, and more aggressive Porsche exhaust tone. Expect sharper pops and gurgles on gear changes and throttle lift, along with more pronounced turbo spool—perfect for drivers who want a more engaging and sporty driving experience.

Fits:

• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>       

Sound Characteristics (Non-Resonated)

This system delivers an amplified exhaust presence with:
• Increased volume over stock
• Deep, aggressive exhaust tone
• Enhanced pops and crackles on overrun
• Noticeable turbo spool sound
• Raw, motorsport-inspired character

Resonated vs Non-Resonated – What’s the Difference?

Resonated Exhaust
• Includes a resonator to filter sound frequencies
• Produces a smoother, more refined tone
• Less cabin drone and reduced harshness
• Ideal for daily driving and long journeys

Non-Resonated Exhaust
• No sound filtering component
• Louder and more aggressive
• More pronounced pops, crackles, and turbo noise
• Raw, track-inspired sound

Key Features

• Fits Porsche Macan 2.0ltr (Base & T models) 2018+
• Non-resonated design for maximum sound output
• High-flow slip-on rear exhaust system
• Choice of quad tips: Carbon Fibre, Polished, or Satin Black
• Saves approx. 17lbs / 7.7 kg vs OEM mufflers
• Mandrel-bent T304L stainless steel construction
• Significantly less restrictive than factory exhaust
• Designed using 3D scanning for OEM-perfect fitment
• No check engine light (CEL)
• No ECU tune required
• Simple bolt-on installation (no welding required)
• Corrosion-resistant and long-lasting

Performance Benefits

Improved Power & Throttle Response
Reduced back pressure allows the engine to breathe more efficiently.

Weight Reduction
Lighter construction improves overall vehicle dynamics.

Enhanced Driving Experience
Aggressive sound profile transforms the character of the vehicle.

Optimised Efficiency
Improved exhaust flow supports better engine performance.

Installation Notes

• Direct bolt-on system
• Minor cutting required at OEM exhaust break point (refer to factory dimple locations)
• No welding required

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR19MCN2L

The product you are viewing cross references to these numbers

Resonated Rear Sports Exhaust System 

Upgrade your Porsche Macan 2.0 with a refined yet sporty exhaust note using this high-performance resonated rear sports exhaust system. Designed as a slip-on upgrade, it replaces the restrictive OEM mufflers with a high-flow, lightweight system that enhances both sound and performance.

This system delivers a deeper, richer Porsche tone while maintaining everyday usability. Compared to the standard exhaust, you’ll experience improved throttle response, reduced weight, and a more engaging driving feel—without excessive noise.

Fits:

• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>

Sound Characteristics (Resonated)

The resonated version offers a balanced upgrade in sound:
• Noticeable increase in volume over stock
• Deeper, sportier exhaust tone
• Controlled pops and gurgles on throttle lift
• Subtle turbo spool enhancement
• Reduced cabin drone for daily driving comfort

Resonated vs Non-Resonated – What’s the Difference?

Resonated Exhaust
• Includes a resonator to filter sound frequencies
• Produces a smoother, more refined tone
• Less cabin drone and reduced harshness
• Ideal for daily driving and long journeys

Non-Resonated Exhaust
• No sound filtering component
• Louder and more aggressive
• More pronounced pops, crackles, and turbo noise
• Raw, track-inspired sound

This resonated system is perfect for drivers who want a sportier exhaust note without sacrificing comfort.

Key Features

• Fits Porsche Macan 2.0L (Base & T models) 2018+
• Resonated design for refined sound performance
• High-flow slip-on rear exhaust system
• Choice of quad tips: Carbon Fibre, Polished, or Satin Black
• Saves approx. 17lbs / 7.7kg vs OEM mufflers
• Constructed from mandrel-bent T304L stainless steel
• Significantly less restrictive than factory exhaust
• Designed using 3D scanning for perfect OEM fitment
• No check engine light (CEL)
• No ECU tune required
• Simple bolt-on installation (no welding required)
• Durable, corrosion-resistant construction

Performance Benefits

Improved Power Delivery
Reduced back pressure allows better airflow and throttle response.

Weight Reduction
Lighter than OEM mufflers for improved handling dynamics.

Refined Driving Experience
Balanced sound upgrade without excessive noise.

Enhanced Efficiency
Optimised exhaust flow supports engine performance and efficiency.

Installation Notes

• Direct bolt-on installation
• Minor cutting required at OEM exhaust break point (refer to factory dimple locations)
• No welding required

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR19MCN2LRMB

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Stainless Steel Exhaust System with 200-CPSI Catalytic Converter and Carbon Fibre Tailpipes
The DesignTek stainless steel exhaust system is a complete performance-oriented upgrade for the Porsche Macan 2.0 EU5 from 2019 onwards. It combines durable stainless steel construction with a high-flow 200-CPSI catalytic converter and four large carbon fibre tailpipes Ø105, delivering a sportier exhaust character while retaining catalytic emissions treatment.

Fits:
Porsche 95B.2 Macan 2.0L 2019 >>
 * EU5 specification

The DesignTek stainless steel exhaust system is a complete performance-oriented upgrade for the Porsche Macan 2.0 EU5 from 2019 onwards. It combines durable stainless steel construction with a high-flow 200-CPSI catalytic converter and four large carbon fibre tailpipes, delivering a sportier exhaust character while retaining catalytic emissions treatment.

The integrated Euro 4-specification catalyst measures approximately Ø130 × 100H × 110L mm. Its lower-density 200-CPSI core allows exhaust gases to pass more freely than through many standard catalyst assemblies, helping to reduce restriction while maintaining an active catalytic surface. This provides a practical alternative to a catalyst-bypass system for owners seeking improved flow without completely removing emissions-control equipment.

Manufactured from corrosion-resistant stainless steel, the system is designed to withstand high exhaust temperatures, condensation, road salt and repeated heat cycles. Vehicle-specific pipe routing and mounting points help ensure correct alignment with compatible Porsche Macan exhaust connections and the rear bumper.

At the rear, the system is finished with four Ø105 mm carbon fibre tailpipes. Their woven carbon finish complements the Macan’s diffuser and exterior trim, while the quad-outlet layout gives the vehicle a more purposeful, performance-inspired appearance.

NOTE:
Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606005B16

The product you are viewing cross references to these numbers