Please wait…

Please wait while we process your order,
do not press the back button…

Porsche Panamera 971 MK1 (2017-2020) 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20 Exterior Styling / Spoilers Air Ducts & Vents

Oil cooler air intake, Front bumper. Porsche 911 / 930 Turbo 1974-89 › 91150530800

4 4 4 4

Check vehicle fitment

OE Match

91150530800/2

Product Information

OE Match front bumper intake for oil-cooler airflow on Porsche 911 and 930 Turbo models from 1974–1989. It provides an air entry point towards the front-mounted oil cooler on the G-model 911.

Fits

Porsche 911 - 1974 to 1989

911 1974–1977 2.7L / 1976–77 3.0 Carrera
911 1978–1983 3.0L / SC
911 1984–1986 3.2L
911 1987–1989 3.2L G50
911 1975–1977 3.0L Turbo (930)
911 1978–1989 3.3L Turbo (930)

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram ref no 13

What This Product Does

This intake directs incoming air from the bumper area towards the oil cooler. Its purpose concerns the cooler's air supply; it is not an oil-carrying component or a replacement cooler.

Functions

Provides an inlet for cooling air at the front bumper.
Guides incoming airflow towards the oil cooler.
Forms part of the exterior oil-cooling airflow arrangement.

Technical Details

Brand: OE Match.
Application: Porsche 911 G-model, including the listed 930 Turbo variants.
Installation area: front bumper.
Associated internal diagram reference: 91150530800, described as a cover.

Symptoms of Fault

Inspect the intake if it has visible cracks, damaged attachment points, looseness or an obstructed opening. Rattling or contact marks around adjacent bodywork can also warrant checking the fit and fixings. These signs should be assessed before deciding which component needs replacement.

Why Replacement Matters

Renewing a damaged or missing intake restores the intended air-entry arrangement. Check the surrounding ducting and attachments at the same time, since an obstruction or loose adjoining component will not be addressed by replacing the intake alone.

FAQs

Is this the oil cooler itself?
No. This component is an air intake positioned at the bumper, rather than the heat exchanger.

What should be checked before fitting?
Confirm the vehicle application, bumper configuration and existing cooler arrangement. Compare the mounting area and inspect associated fixings before any painting or modification.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150530800

91150530800

The product you are viewing cross references to these numbers

Related products

4 4 4 4

Carbon fibre front wing air outlet panel. Porsche 971.1 Panamera

SDP971-06

Product Information

Carbon Fibre front wing air outlet panel. Porsche 971.1 Panamera

Fits:

Porsche 971.1 Panamera - 2017 to 2020

"Dry" Carbon Fibre

Dry carbon fibre fabric is weaved with resin pre-impregnated carbon fiber (called “pre-preg” in carbon fiber industry)
Pre-preg carbon fibre reaches optimal resin/carbon ratio to strive for its characteristics, thus during the carbon parts manufacturing process, there is no resin application needed when molding. This is why it is called “Dry” carbon fibre.

The autoclave process is another important step to finish our products. In the autoclave, the high pressure and temperature are the key to our products’ tensile strength, which can be up to 15 times higher than steel.

Unlike the Wet carbon fiber where the resin is applied into carbon fibre cloth to form a sturdy structure, dry carbon fiber parts are generally 50-60% lighter than those made of wet carbon fiber and the strength of these two materials are also different.

Another thing that is hard to overlook is the finish, dry carbon creates a beautiful & clean weave in the autoclave while wet carbon comes out to be otherwise. Even average dry carbon is way better than wet carbon in looks, strength and weight.

Dry Carbon Fibre

Clean weave, better look/finish
Significantly stronger & more durable
50-60% lighter than wet carbon

5 5 5 5 5

Front wing air outlet surround carbon fibre. Porsche 971.1 Panamera

SDP971-07

Product Information

Front wing air outlet surround set carbon fibre.
Sold as a Pair

Fits:
Porsche 971.1 Panamera - 2017 to 2020

Enhance the front wing air outlet look with this Dry carbon fibre surround panel.

Pre-preg "Dry" Carbon Fibre

Dry carbon fibre fabric is weaved with resin pre-impregnated carbon fiber (called “pre-preg” in carbon fiber industry)
Pre-preg carbon fibre reaches optimal resin/carbon ratio to strive for its characteristics, thus during the carbon parts manufacturing process, there is no resin application needed when molding. This is why it is called “Dry” carbon fibre.

The autoclave process is another important step to finish our products. In the autoclave, the high pressure and temperature are the key to our products’ tensile strength, which can be up to 15 times higher than steel.

Unlike the Wet carbon fiber where the resin is applied into carbon fibre cloth to form a sturdy structure, dry carbon fiber parts are generally 50-60% lighter than those made of wet carbon fiber and the strength of these two materials are also different.

Another thing that is hard to overlook is the finish, dry carbon creates a beautiful & clean weave in the autoclave while wet carbon comes out to be otherwise. Even average dry carbon is way better than wet carbon in looks, strength and weight.

Dry Carbon Fibre:

• Clean weave, better look/finish
• Significantly stronger & more durable
• 50-60% lighter than wet carbon

6 6 6 6 6 6

Front wing side vent kit carbon fibre. Porsche 971.1

VENTKIT1

Product Information

Front wing side vent kit carbon fibre.

Fits:
Porsche 971.1 - 2017 to 2020

Kit Includes:
Front Wing Air Outlet Surrounds x 2
Front Wing Air Outlet Panel x 2

Enhance the front wing air outlet look with this Dry carbon fibre surround panel.

Pre-preg "Dry" Carbon Fibre
Dry carbon fibre fabric is weaved with resin pre-impregnated carbon fiber (called “pre-preg” in carbon fiber industry) .

Pre-preg carbon fibre reaches optimal resin/carbon ratio to strive for its characteristics, thus during the carbon parts manufacturing process, there is no resin application needed when molding. This is why it is called “Dry” carbon fibre. The autoclave process is another important step to finish our products. In the autoclave, the high pressure and temperature are the key to our products’ tensile strength, which can be up to 15 times higher than steel.

Unlike the Wet carbon fiber where the resin is applied into carbon fibre cloth to form a sturdy structure, dry carbon fiber parts are generally 50-60% lighter than those made of wet carbon fiber and the strength of these two materials are also different. Another thing that is hard to overlook is the finish, dry carbon creates a beautiful & clean weave in the autoclave while wet carbon comes out to be otherwise. Even average dry carbon is way better than wet carbon in looks, strength and weight.

Dry Carbon Fibre

• Clean weave, better look/finish
• Significantly stronger & more durable
• 50-60% lighter than wet carbon

Enter your VAT number here and click Verify:

Oil cooler air intake, Front bumper. Porsche 911 / 930 Turbo 1974-89 › 91150530800