do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
The OE Match Targa Roof Seal Attaching Rails are replacement upper retaining rails for the left and right sides of the removable Targa roof sealing system on Porsche 914 models.
Fits:- Porsche 914 1970-76
Diagram Ref No 18
These rails provide the rigid mounting and locating surface for the associated upper Targa roof weatherseals.
Rather than providing the weather seal themselves, the rails hold the rubber sealing components in their intended position so that they can maintain consistent contact with the raised door glass and surrounding Targa roof structure.
Correct seal positioning is particularly important on a Porsche 914 because its removable roof and frameless side windows rely on several individual seals working together.
If the retaining rail becomes bent, corroded, damaged or loose, the rubber seal may no longer sit evenly along the roof edge.
This can contribute to:
- Water ingress.
- Wind whistle.
- Increased cabin noise.
- Uneven seal contact.
- Loose or displaced weatherstripping.
Replacing damaged attaching rails helps restore the proper foundation for the Targa roof seals and supports accurate roof-to-window alignment.
What This Product Does:
The Targa Roof Seal Attaching Rail provides a rigid mounting channel for the upper side weatherseal.
Its main functions are to:
- Secure the upper Targa roof seal in position.
- Maintain correct seal alignment.
- Support consistent contact between the seal and door glass.
- Prevent the weatherstrip from moving or lifting out of position.
- Maintain the intended profile of the seal.
- Provide a secure mounting point for the weatherstrip.
- Help support effective weather sealing.
- Restore the original roof-seal installation during restoration.
- Replace corroded, bent or damaged original rails.
Symptoms Of Wear Or Failure:
Possible symptoms include:
- Visible corrosion.
- Bent or distorted rail.
- Loose retaining rail.
- Damaged mounting holes.
- Missing or damaged fasteners.
- Seal repeatedly coming loose.
- Seal lifting away from the roof.
- Uneven seal position.
- Visible gaps between glass and weatherstrip.
- Water entering around the upper door glass.
- Wind whistle at speed.
- Increased cabin wind noise.
- Roof seal appearing twisted.
- Difficulty achieving correct window-to-seal alignment.
Why Replacement Matters:
Replacing damaged Targa Roof Seal Attaching Rails helps restore:
- Secure weatherseal mounting.
- Correct seal positioning.
- Consistent window-to-seal contact.
- Better resistance to water ingress.
- Reduced wind noise.
- Reduced seal movement.
- Correct Targa roof appearance.
- Factory-style roof restoration.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91453186
The product you are viewing cross references to these numbers
- Porsche 914 (1970-1976)
Shop Securely
12 Month Warranty
Worldwide Delivery
Bonded Rubber Buffer – Sunroof & Convertible Top Motor Mount
High-quality bonded rubber-metal buffer designed for multiple Porsche applications including sunroof-equipped Porsche 928 models and convertible Porsche 911, 964, and 993 models.
On Porsche 928 models, this component functions as a sunroof
mounting buffer, helping to stabilise and isolate movement within the sunroof
mechanism. On convertible 911, 964, and 993 models, it is used to secure the
convertible top motor bracket, providing essential vibration damping and
structural support.
Fits:
Diagram ref no 31
Manufactured using a durable rubber-metal bonded construction, this component is engineered to withstand repeated movement, vibration, and environmental exposure while maintaining flexibility and strength.
A direct replacement part, this rubber buffer is essential for maintaining proper operation, reducing vibration, and ensuring long-term reliability of roof and motor mounting systems.
Key Features
• Direct replacement bonded rubber-metal buffer
• Suitable for Porsche 928 (sunroof models)
• Also fits Porsche 911, 964, and 993 convertible models
• Used for sunroof mounting and convertible top motor bracket
• Reduces vibration and stabilises mounted components
• Durable rubber-metal bonded construction
• OEM-style fit and function
Function and Purpose
This bonded rubber buffer acts as both a mounting support and vibration isolator.
It helps to:
• Stabilise sunroof or convertible motor components
• Reduce vibration and noise during operation
• Prevent excessive movement or stress on mounting points
• Protect surrounding components from wear
Why Replace Your Rubber Buffer
Over time, rubber-metal mounts can degrade due to age and mechanical stress.
Common issues include:
• Cracked or hardened rubber
• Reduced vibration damping
• Increased noise or movement
• Misalignment of sunroof or convertible motor components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9997033080A
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Bonded Rubber Buffer – Sunroof & Convertible Top Motor Mount
High-quality bonded rubber-metal buffer designed for multiple Porsche applications including sunroof-equipped Porsche 928 models and convertible Porsche 911, 964, and 993 models.
On Porsche 928 models, this component functions as a sunroof
mounting buffer, helping to stabilise and isolate movement within the sunroof
mechanism. On convertible 911, 964, and 993 models, it is used to secure the
convertible top motor bracket, providing essential vibration damping and
structural support.
Fits:
Diagram ref no 31
Manufactured using a durable rubber-metal bonded construction, this component is engineered to withstand repeated movement, vibration, and environmental exposure while maintaining flexibility and strength.
A direct replacement part, this rubber buffer is essential for maintaining proper operation, reducing vibration, and ensuring long-term reliability of roof and motor mounting systems.
Key Features
• Direct replacement bonded rubber-metal buffer
• Suitable for Porsche 928 (sunroof models)
• Also fits Porsche 911, 964, and 993 convertible models
• Used for sunroof mounting and convertible top motor bracket
• Reduces vibration and stabilises mounted components
• Durable rubber-metal bonded construction
• OEM-style fit and function
Function and Purpose
This bonded rubber buffer acts as both a mounting support and vibration isolator.
It helps to:
• Stabilise sunroof or convertible motor components
• Reduce vibration and noise during operation
• Prevent excessive movement or stress on mounting points
• Protect surrounding components from wear
Why Replace Your Rubber Buffer
Over time, rubber-metal mounts can degrade due to age and mechanical stress.
Common issues include:
• Cracked or hardened rubber
• Reduced vibration damping
• Increased noise or movement
• Misalignment of sunroof or convertible motor components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9997033080A
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Sunroof Motor Bonded Rubber Buffer
Sold each - 2 required per car
High-quality bonded rubber buffer designed for mounting the sunroof motor on all Porsche 928 models equipped with a sunroof.
This OEM-style rubber-metal bush provides secure mounting
and vibration isolation for the sunroof motor, ensuring stable operation while
reducing noise and mechanical stress within the roof mechanism.
Fits:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 43
Manufactured using a durable rubber-metal bonded construction, this component is engineered to withstand repeated movement, vibration, and environmental exposure while maintaining flexibility and structural integrity.
A direct replacement part, this sunroof motor mounting buffer is essential for maintaining correct alignment, smooth operation, and long-term reliability of the sunroof system.
Key Features
• Direct replacement bonded rubber buffer for sunroof motor
• Suitable for all Porsche 928 models with sunroof
• Provides secure mounting and vibration isolation
• Designed specifically for sunroof motor bracket mounting
• Durable rubber-metal bonded construction
• OEM-style fit and function
Function and Purpose
This rubber buffer acts as a mounting interface and vibration isolator for the sunroof motor.
It helps to:
• Secure the sunroof motor in position
• Reduce vibration and operational noise
• Prevent stress on mounting brackets and components
• Ensure smooth and reliable sunroof operation
Why Replace Your Sunroof Motor Buffer
Over time, rubber mounting components can degrade due to age and use.
Common issues include:
• Cracked or hardened rubber
• Loss of vibration damping performance
• Increased noise from sunroof operation
• Movement or misalignment of the sunroof motor
Replacing the buffer restores proper mounting stability and improves overall system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970330600
The product you are viewing cross references to these numbers
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Sunroof Motor Bonded Rubber Buffer
Sold each - 2 required per car
High-quality bonded rubber buffer designed for mounting the sunroof motor on all Porsche 928 models equipped with a sunroof.
This OEM-style rubber-metal bush provides secure mounting
and vibration isolation for the sunroof motor, ensuring stable operation while
reducing noise and mechanical stress within the roof mechanism.
Fits:
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Diagram ref no 43
Manufactured using a durable rubber-metal bonded construction, this component is engineered to withstand repeated movement, vibration, and environmental exposure while maintaining flexibility and structural integrity.
A direct replacement part, this sunroof motor mounting buffer is essential for maintaining correct alignment, smooth operation, and long-term reliability of the sunroof system.
Key Features
• Direct replacement bonded rubber buffer for sunroof motor
• Suitable for all Porsche 928 models with sunroof
• Provides secure mounting and vibration isolation
• Designed specifically for sunroof motor bracket mounting
• Durable rubber-metal bonded construction
• OEM-style fit and function
Function and Purpose
This rubber buffer acts as a mounting interface and vibration isolator for the sunroof motor.
It helps to:
• Secure the sunroof motor in position
• Reduce vibration and operational noise
• Prevent stress on mounting brackets and components
• Ensure smooth and reliable sunroof operation
Why Replace Your Sunroof Motor Buffer
Over time, rubber mounting components can degrade due to age and use.
Common issues include:
• Cracked or hardened rubber
• Loss of vibration damping performance
• Increased noise from sunroof operation
• Movement or misalignment of the sunroof motor
Replacing the buffer restores proper mounting stability and improves overall system performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970330600
The product you are viewing cross references to these numbers
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed