Product Information
Oil Cooler Pipe – Supply
Maintain efficient gearbox temperature control with this OE
Match transmission oil cooler supply pipe, designed for Porsche Boxster and
Cayman models fitted with the PDK dual-clutch transmission.
Fits:
- Porsche Boxster 987 MKII 2.9L 2009-12
-
Porsche Boxster S 987 MKII 3.4L 2009-12
-
Porsche Boxster 981 2.7L 2012-16
-
Porsche Boxster 981 S / GTS 3.4L 2012-16
-
Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
-
Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
-
Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
-
Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
-
Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
-
Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
-
Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
-
Porsche Cayman 2.9L 987C MKII 2009-12
-
Porsche Cayman S / R 3.4L 987C MKII 2009-12
-
Porsche Cayman 2.7L 981 2013-16
-
Porsche Cayman S / GTS 3.4L 981 2013-16
-
Porsche Cayman GT4 3.8L 2015-16
-
Porsche Cayman 718 2.0L PDK (300 Bhp)
-
Porsche Cayman S 718 2.5L PDK (350 Bhp)
-
Porsche Cayman T 718 2.0L PDK (300 Bhp)
-
Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
-
Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
-
Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Diagram ref no 29
This replacement pipe provides a dedicated oil flow path
within the gearbox cooling circuit, allowing transmission oil to reach the
cooling system where excess heat can be managed.
An economical aftermarket alternative to the original
Porsche component, it is ideal for replacing a leaking, corroded or damaged
supply pipe.
For PDK transmission applications only. Not suitable for
manual gearbox installations.
What Does It Do?
The oil cooler supply pipe transports transmission oil from
the PDK gearbox towards the cooling circuit.
As the gearbox operates, friction and internal mechanical
activity produce heat. The transmission cooling system helps remove excess heat
by passing oil through a heat exchanger.
The supply pipe forms the feed side of this system,
delivering oil for cooling before it continues through the return circuit.
Why Is It Important?
A dependable oil supply is essential for keeping the PDK
transmission within its intended operating temperature range.
A faulty supply pipe may cause:
- Transmission
oil escaping from damaged pipework
- Reduced
oil volume within the cooling system
- Oil
staining beneath the vehicle
- Insufficient
oil circulation through the heat exchanger
- Increased
risk of gearbox overheating or damage
Maintaining the condition of the supply pipe helps preserve
the performance and reliability of the transmission cooling circuit.
Why Do Oil Cooler Supply Pipes Fail?
The pipe is exposed to changing temperatures, vibration and
environmental conditions throughout its service life.
Deterioration can occur through:
- Corrosion
from road moisture and salt
- Fatigue
caused by repeated heating and cooling
- Damage
to pipe connections or sealing surfaces
- Contact
with surrounding mechanical components
- Accidental
damage during transmission repairs
When Should It Be Replaced?
Renew the supply pipe if inspection reveals corrosion,
cracks, deformation or oil seepage around its connections.
Replacement may also be necessary when carrying out repairs
to the PDK gearbox cooling system, particularly if the original pipe cannot be
safely reused.
Investigate any unexplained gearbox oil loss immediately to
avoid possible transmission damage.
Installation Notes
Before installation, examine the heat exchanger connections,
sealing rings and pipe retaining hardware.
Ensure the replacement supply pipe follows the correct
routing and is securely fitted without twisting or placing stress on the
connections.
Use the correct transmission oil and follow Porsche's
specified PDK filling, temperature checking and oil level procedures. Inspect
for leaks after installation.
Key Features
- OE
Match aftermarket replacement supply pipe
- For
applicable Porsche 987.2, 981 and 718 PDK transmissions
- Delivers
transmission oil to the gearbox cooling circuit
- Helps
maintain correct oil flow through the heat exchanger
- Replaces
damaged, corroded or leaking supply lines
- Designed
for the original pipe routing and connection arrangement
- Cost-effective
alternative to a genuine Porsche component
OE Match Porsche Boxster & Cayman PDK Gearbox Oil
Cooler Supply Pipes
Porsche 987.2, 981 and 718 Boxster and Cayman models
equipped with PDK transmissions rely on dedicated oil cooling pipework to help
regulate gearbox temperatures during everyday driving and demanding operating
conditions.
The OE Match oil cooler supply pipe, provides an aftermarket
replacement for the transmission oil feed line. It helps restore the flow of
gearbox oil through the cooling circuit when the original pipe becomes damaged
or develops a leak.
Related reference numbersRelated, superseded, cross reference or alternative numbers for comparison.
9G230708505The product you are viewing cross references to these numbers