Rear Reflector Cover. Porsche 997 C4S  ›  99751225905

Rear Reflector with Mounting Stud - fits Left or Right Hand Side
Sold each - 2 required per car

Restore the authentic appearance and safety of your classic Porsche with this OE Match Rear Reflector with Mounting Stud, designed specifically for the Porsche 356. Manufactured to original equipment specifications, this premium replacement rear reflector provides the correct factory appearance while improving rear vehicle visibility in low-light conditions.

Fits:

• Porsche 356 1950-55  (chassis F 11 799>>) / Cabrio (chassis F 15 073>>)
• Porsche 356A 1955-59
• Porsche 356B 1959-63  (not for USA cars)
• Porsche 356C 1963-65 (not for USA cars)

Complete with an integrated mounting stud for straightforward installation, this OE Match reflector is the ideal replacement for faded, cracked or damaged originals during restoration or routine maintenance.

What Does the Rear Reflector Do?

The rear reflector is an important passive safety component mounted on the rear of the vehicle.

Its primary functions include:

• Reflecting light from following vehicles to improve visibility.
• Increasing rear-end visibility during night driving.
• Helping other road users judge the vehicle's position.
• Maintaining the original factory appearance of the Porsche 356.
• Completing concours-quality restorations.
• Providing a secure fit using the integrated mounting stud.

Although it contains no electrical components, the reflector plays an essential role in improving road safety while preserving the classic styling of the Porsche 356.

Why Do Rear Reflectors Need Replacing?

After decades of exposure, original reflectors can deteriorate through age and environmental conditions. Common reasons for replacement include:

• UV fading reducing reflectivity.
• Cracked or damaged lenses.
• Stone chip damage.
• Water ingress.
• Corrosion around the mounting stud.
• Discolouration from prolonged sunlight exposure.
• Missing or damaged reflectors during restoration.

Replacing worn reflectors restores both the appearance and safety of your classic Porsche.

When Should the Rear Reflector Be Replaced?

Replacement is recommended whenever:

• The reflector has faded or lost its reflective properties.
• The lens is cracked or damaged.
• The mounting stud is corroded or broken.
• The vehicle is undergoing body restoration.
• Rear body panels are being repainted.
• Completing a concours or factory-correct restoration.

Installing new reflectors during restoration provides the finishing touch while helping maintain the original specification of the vehicle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64473150100

The product you are viewing cross references to these numbers

Rear Reflector.
The OE Match Rear Reflector is a premium-quality replacement rear body reflector designed to restore the original appearance and passive safety of compatible classic Porsche models. Manufactured to OE specifications for fit, finish and reflectivity, this rear reflector improves vehicle visibility by reflecting light from following traffic, helping to increase safety in low-light conditions while maintaining the authentic factory styling of the rear bodywork.  

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Manufactured from high-quality UV-resistant automotive-grade acrylic with a durable reflective backing, the reflector is engineered to resist fading, cracking, moisture and road debris. Precision-moulded for direct OE-style installation, it fits seamlessly into the original mounting location, making it the ideal replacement for faded, damaged or missing original reflectors during restoration or routine maintenance.  

What This Product Does:

• Reflects light from following vehicles to improve visibility.
• Increases vehicle safety in low-light conditions.
• Restores the original appearance of the rear bodywork.
• Provides a factory-style fit and finish.
• Helps improve vehicle visibility when parked or driving at night.
• Resists weathering, UV exposure and road debris.
• Replaces damaged, faded or missing rear reflectors.
• Forms an essential part of the vehicle's exterior lighting and safety system.

Symptoms Of Wear Or Failure:

• Cracked or broken reflector lens.
• Faded or discoloured reflective surface.
• Reduced reflectivity at night.
• Loose or poorly fitting reflector.
• Moisture or dirt trapped behind the reflector.
• Chipped or scratched lens surface.
• Missing reflector.
• Damaged mounting points.
• Cosmetic deterioration affecting the rear appearance.
• MOT or vehicle inspection failure where reflector condition is assessed.

Why Replacement Matters:

• Rear reflectors are continuously exposed to sunlight, rain, road debris, stone impacts and changing temperatures. Over time, the reflective surface can fade, while the lens may become cracked or damaged, significantly reducing its effectiveness and detracting from the appearance of the vehicle.
• A damaged or missing reflector reduces the visibility of the vehicle to other road users in poor lighting conditions, increasing the risk of accidents. It can also allow moisture and debris to accumulate around the mounting area, potentially affecting surrounding bodywork and trim.
• Replacing a worn or damaged rear reflector restores the vehicle's passive safety features and factory appearance. The OE Match replacement provides OE-style fitment, premium UV-resistant materials and long-lasting reflective performance, making it the ideal choice for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64473150100

The product you are viewing cross references to these numbers

Rear reflector angled bracket.
This rear reflector angled bracket is the precise aluminium mounting piece that positions the rear reflector at the correct angle on classic Porsche bodywork. Manufactured to original contours with factory-style hole spacing, it ensures the reflector sits true to the panel, keeping sight lines clean and the reflector properly aimed for visibility and legality. The lightweight aluminium construction resists corrosion and matches the original look—ideal for restorations where authenticity and fit matter.
Sold each, Two required. 

Fits:
Porsche 356 Pre-A (1950-1955)
Porsche 356A (1955-1959)

Fits to number 95 on the diagram

•  Position: Rear body panel area (reflector location)
•  Function: Provides the angled mount for the rear reflector; sets distance, tilt, and alignment to the body surface

Why replacement matters:
•  Original brackets often warp, crack, or corrode, causing a crooked reflector, loose fit, or panel marring.
•  A fresh bracket restores correct alignment, secure mounting, and a clean OEM appearance—important for safety inspections and concours-level finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64473150111

The product you are viewing cross references to these numbers

Glass rear reflector with aluminium housing and mounting hardware set.
Sold as a pair

Fits:
Porsche 356 Pre-A - 1950 to 1955 
Porsche 356A  - 1955 to 1959

These are new production concours correct quality replicas. The bezel is made using the same press process as the original, from nickel chromed brass and the back is zinc plated steel. The red, glass lenses are marked K1315 with the wave.

Consisting of a pair of reflectors each with rubber washer, aluminium mounts, 6mm stud and nut.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64473150100

The product you are viewing cross references to these numbers