Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Part Categories +
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
Check vehicle fitment
OE Match
OE Match
95134352700/2
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134352700
The product you are viewing cross references to these numbers
Product Information
Front shock absorber bump stops and dust covers by OE Match for Porsche 944 models from 1987, 944 Turbo and 968 models without M030 sports suspension. This SET OF 4 PARTS contains the protective components required for both front shock absorber assemblies.
Fits:
Porsche 944 1987>>
Porsche 944 Turbo
Porsche 968 1992 - 1995 *Cars without sport suspension (without M030 option)
Diagram ref no 10 & 11
What This Product Does
The rubber stops cushion the suspension at the end of its compression travel, while the protective boots help shield the shock absorber piston rods from dirt and road debris. Renewing these components supports the correct operation and protection of the front dampers.
Functions
- Cushions the front suspension during full compression
- Protects the shock absorber piston rods from contamination
- Helps reduce harsh impacts caused by deteriorated bump stops
- Provides protection for both front shock absorber assemblies
Technical Details
- Position: Front
- Contents: two rubber stops and two protective boots
- Total quantity: SET OF 4 PARTS
- Diagram ref no 10 and 11
Symptoms of Fault
- Cracked, split or perished bump stops
- Torn or detached dust covers
- Harsh impacts when the suspension compresses fully
- Rattling from damaged covers or associated hardware
- Visible dirt collecting around an exposed shock absorber piston rod
Why Replacement Matters
Bump stops and dust covers deteriorate through age, repeated suspension movement and exposure to road contamination. Damaged parts can leave the damper rod exposed and reduce cushioning at the limit of suspension travel. They should be inspected when replacing front shock absorbers so worn protective components are not reused.
OE Reference
- 95134352700
- 95134352901
FAQs
- Does this set cover both front shock absorbers? Yes. It contains two rubber stops and two dust covers for the front axle.
- Can it be fitted to a Porsche 968 with M030 suspension? No. The supplied application excludes cars equipped with the M030 sports suspension option.
- Should these parts be renewed with new shock absorbers? Inspecting and replacing worn bump stops and covers during damper renewal helps avoid reusing perished protective parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134352700
58785SET
95134352901
95134352700
95134352901
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price: £38.00
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
S54
Product Information
SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
The product you are viewing cross references to these numbers
Product Information
Rennline Clubsport Camber Plate Top Mount Set.SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
99134301502
982199131
982199131D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: £707.00
Orderable - 9 to 19 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
S55
Product Information
SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
The product you are viewing cross references to these numbers
Product Information
Rennline Race Spec Camber Plate FRONT Top Mount Set.SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
99134301502
982199131D
982199131
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Price: £633.00
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
9P1412103
Product Information
This Porsche Genuine OE Shock Absorber Concave Washer 9P1412103 is a small but essential suspension mounting component used on selected Porsche 991.2 and 992 models with advanced suspension systems. It ensures proper load distribution and alignment within the shock absorber assembly, helping maintain factory suspension performance, ride quality, and durability.
Sold individually, 2 required - fits left or right suspension strut
Fits:
* cars with Front axle lift function (Option code: 474)
Porsche 991.2 Carrera 2017 - 2019
Porsche 991.2 Turbo 2017 - 2020
* with Controlled suspension system (Option code: 2UH)
Porsche 992.1 Carrera 2020 - 2024
Porsche 992 DAKAR (PR:E7S) 2022 - 2024
Porsche 992.1 Turbo 2020 - 2025
* with Controlled suspension system (Option code: 2UH)
Porsche 992.2 Carrera 2024>>
Porsche 992.2 Turbo S 2026>>
Diagram ref no 10
The concave washer sits within the shock absorber mounting assembly and helps evenly distribute clamping force across the suspension components. Its specially formed curved profile supports the correct positioning of the shock absorber mount, helping maintain suspension geometry and reducing stress on mounting surfaces during suspension movement.
Functions & Technical Role
• Load distribution: Spreads suspension forces evenly across mounting points
• Mounting support: Assists correct positioning of the shock absorber assembly
• Suspension stability: Helps maintain proper suspension alignment under load
• Vibration control: Reduces stress and movement within the mounting assembly
• OEM precision: Manufactured to Porsche specifications for exact fitment and durability
Fitment / Position on car
• Fitting position: Front axle suspension
• Location: Shock absorber / strut mounting assembly
• System: Front suspension and damping system
The concave washer supports correct suspension mounting geometry and helps prevent uneven stress on suspension components. Proper load distribution is essential for maintaining ride quality, handling precision, and long-term durability.
When to Replace
• During shock absorber or suspension overhaul
• Damaged, bent, or corroded mounting hardware
• Suspension noise or movement from the strut assembly
• Following accident or suspension impact damage
• When replacing associated suspension mounting components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412103
The product you are viewing cross references to these numbers
Product Information
Shock absorber concave washerThis Porsche Genuine OE Shock Absorber Concave Washer 9P1412103 is a small but essential suspension mounting component used on selected Porsche 991.2 and 992 models with advanced suspension systems. It ensures proper load distribution and alignment within the shock absorber assembly, helping maintain factory suspension performance, ride quality, and durability.
Sold individually, 2 required - fits left or right suspension strut
Fits:
* cars with Front axle lift function (Option code: 474)
Porsche 991.2 Carrera 2017 - 2019
Porsche 991.2 Turbo 2017 - 2020
* with Controlled suspension system (Option code: 2UH)
Porsche 992.1 Carrera 2020 - 2024
Porsche 992 DAKAR (PR:E7S) 2022 - 2024
Porsche 992.1 Turbo 2020 - 2025
* with Controlled suspension system (Option code: 2UH)
Porsche 992.2 Carrera 2024>>
Porsche 992.2 Turbo S 2026>>
Diagram ref no 10
The concave washer sits within the shock absorber mounting assembly and helps evenly distribute clamping force across the suspension components. Its specially formed curved profile supports the correct positioning of the shock absorber mount, helping maintain suspension geometry and reducing stress on mounting surfaces during suspension movement.
Functions & Technical Role
• Load distribution: Spreads suspension forces evenly across mounting points
• Mounting support: Assists correct positioning of the shock absorber assembly
• Suspension stability: Helps maintain proper suspension alignment under load
• Vibration control: Reduces stress and movement within the mounting assembly
• OEM precision: Manufactured to Porsche specifications for exact fitment and durability
Fitment / Position on car
• Fitting position: Front axle suspension
• Location: Shock absorber / strut mounting assembly
• System: Front suspension and damping system
The concave washer supports correct suspension mounting geometry and helps prevent uneven stress on suspension components. Proper load distribution is essential for maintaining ride quality, handling precision, and long-term durability.
When to Replace
• During shock absorber or suspension overhaul
• Damaged, bent, or corroded mounting hardware
• Suspension noise or movement from the strut assembly
• Following accident or suspension impact damage
• When replacing associated suspension mounting components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412103
9P1412103
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
Price: £18.22
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information