Shock absorber, Front. Porsche 970 Panamera Standard Chassis 2009-16  ›  97034304131

OE Match front shock absorber for Porsche 970 Panamera models equipped with the standard chassis. This replacement damper is not suitable for air suspension.

Sold each

Fits

Porsche 970 Panamera 2009>> (Front) I029STANDARD CHASSIS (not for Air suspension)

The following applications require the standard-chassis specification stated above.

• Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
• Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
• Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
• Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
• Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
• Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram reference number 1

What This Product Does

The damper controls spring-driven suspension movement as the front wheels travel over uneven surfaces. It limits repeated oscillation after a bump rather than allowing the suspension to continue bouncing.

Functions

• Damps compression and rebound movement.
• Controls repeated front suspension oscillation.
• Restrains unwanted body movement during changes in load.
  
  

Technical Details

• Brand: OE Match.
• Installation position: Front.
• Part number: 97034304131.
• Chassis specification: PR:029 standard chassis; supplied application marking I029.
• Diagram application: Panamera 970 (G1), 2010–16.
• Diagram quantity: two dampers per vehicle; supplied individually.
  
  

Symptoms of Fault

• Repeated bouncing after road undulations.
• More pronounced front-end dive when braking.
• Oil residue or leakage around the damper body.
• Knocks over uneven surfaces.
• Cupping or irregular wear across the tyres.
• A floating sensation or imprecise steering feel.
  
  

Why Replacement Matters

Renewal addresses a worn or leaking damper while retaining the specified standard-chassis arrangement. Similar symptoms can originate in bushes, joints or mounts, so inspect the surrounding suspension before deciding which components need replacement. OE Match focuses on Porsche replacement applications, with specification and fitment checks forming part of its component assessment.

FAQs

• Should both front dampers be renewed together?
  Replacing the axle pair is recommended to avoid a mismatch between a new damper and a worn unit.
• Should the top mounts also be changed?
  Inspect them for deterioration, noise or looseness and renew them where necessary. A replacement damper will not correct a worn mount.
• Is an alignment check needed?
  Have the wheel alignment checked after installation, particularly where suspension geometry has been disturbed.
• Will this lower the car?
  This is a standard-chassis replacement, not a lowering component. Correct springs and sound supporting parts remain necessary for the intended ride height.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97034304131

The product you are viewing cross references to these numbers