Track Rod complete with centre bar. Porsche 964 1989-94  ❭  96434703200

Front bump steer kit replaces factory steering tie rods. Price per EACH. Requires 2 per car.
Replacement for 99634713104, 99634713103, 99134713100,



Fits:
Porsche 996
Porsche 997
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman

If you're serious about how your 996, 997, 986 Boxster, 987 Boxster, 987 Cayman, 991, 981 Boxster and 981 Cayman handles, you should upgrade the factory tie rods with an adjustable bump steer kit. There is one major drawback to the factory tie rods, bump steer. Bump steer results from a tie rod that is angled from the steering rack to the spindle. An angled tie rod end will have a larger horizontal travel distance than the rest of the suspension, compared to a level link. Rennline's adjustable bump steer kits solve this problem. Manufactured from 6061 aluminum and feature a turnbuckle design that allow each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. A number of spacers are also included and can be added or removed accordingly to get a level tie rod for your vehicles specific ride height. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions.

Note: 2 kits required per car. Rubber Boots not included but available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S7510

The product you are viewing cross references to these numbers

Track Rod.

Fits:
Porsche 981 Boxster 2012 - 2016
Porsche 981C Cayman 2014 - 2016
Porsche 991 Carrera 2012 - 2016
Porsche 991 Turbo 2014 - 2016
Porsche 991 GT3 2014 - 2016

Price is for each

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99134713101

The product you are viewing cross references to these numbers

Lock nut for Steering rack tie rod end, M12 x 1,5
This Genuine Porsche lock nut is an OE M12 x 1.5 fastening nut used for securing steering rack tie rod end and related chassis components on selected Porsche 993, 996, 997, 991, Boxster, Cayman and 970 Panamera models. It is ideal for replacing damaged, corroded or previously removed nuts during steering, suspension or chassis repairs.
Sold individually, 2 required per vehicle

Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Cayman 987.1 2005 - 2008
Porsche Cayman 987.2 2009 - 2012
Porsche Cayman 981 2012 - 2016
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 10

This lock nut fits in the steering and chassis assembly, commonly used at the steering rack tie rod end / track rod end connection. Depending on model and application, M12 x 1.5 lock nuts may also appear in suspension and control arm fastening locations.

This is a small but important OE Porsche hardware item that helps secure critical chassis and steering components to the correct factory standard.

Functions
•  Secures the steering rack tie rod end connection
•  Provides a factory-correct M12 x 1.5 locking fastening point
•  Helps maintain secure attachment of steering and chassis components
•  Supports correct steering geometry and component stability
•  Helps prevent loosening caused by vibration, road loads and suspension movement
•  Suitable for replacement during steering rack, track rod or tie rod end work
•  Maintains OE Porsche fitment and fastening quality.

Lock nuts are designed to provide secure fastening and are often recommended for replacement after removal, especially on steering and suspension components. Over time, the nut can corrode, seize, round off or lose its locking effectiveness. Replacing the original nut with a Genuine Porsche OE M12 x 1.5 lock nut helps ensure the tie rod end or related component is secured correctly and safely. This is especially important on steering components, where correct fastening is essential for accurate steering response and road safety.

When to replace
•   When replacing a steering rack tie rod end or track rod end
•   When removing or refitting steering rack components
•   If the original nut is corroded, seized or damaged
•   If the nut thread is worn or the locking function is compromised
•   During suspension or steering overhaul work
•   After accident repair or chassis component replacement
•   When restoring the car with correct OE Porsche hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909

The product you are viewing cross references to these numbers