Track rod. Porsche 924S / 944  ❭  94434703329

Lock nut for Steering rack tie rod end, M12 x 1,5
This Genuine Porsche lock nut is an OE M12 x 1.5 fastening nut used for securing steering rack tie rod end and related chassis components on selected Porsche 993, 996, 997, 991, Boxster, Cayman and 970 Panamera models. It is ideal for replacing damaged, corroded or previously removed nuts during steering, suspension or chassis repairs.
Sold individually, 2 required per vehicle

Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Cayman 987.1 2005 - 2008
Porsche Cayman 987.2 2009 - 2012
Porsche Cayman 981 2012 - 2016
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 10

This lock nut fits in the steering and chassis assembly, commonly used at the steering rack tie rod end / track rod end connection. Depending on model and application, M12 x 1.5 lock nuts may also appear in suspension and control arm fastening locations.

This is a small but important OE Porsche hardware item that helps secure critical chassis and steering components to the correct factory standard.

Functions
•  Secures the steering rack tie rod end connection
•  Provides a factory-correct M12 x 1.5 locking fastening point
•  Helps maintain secure attachment of steering and chassis components
•  Supports correct steering geometry and component stability
•  Helps prevent loosening caused by vibration, road loads and suspension movement
•  Suitable for replacement during steering rack, track rod or tie rod end work
•  Maintains OE Porsche fitment and fastening quality.

Lock nuts are designed to provide secure fastening and are often recommended for replacement after removal, especially on steering and suspension components. Over time, the nut can corrode, seize, round off or lose its locking effectiveness. Replacing the original nut with a Genuine Porsche OE M12 x 1.5 lock nut helps ensure the tie rod end or related component is secured correctly and safely. This is especially important on steering components, where correct fastening is essential for accurate steering response and road safety.

When to replace
•   When replacing a steering rack tie rod end or track rod end
•   When removing or refitting steering rack components
•   If the original nut is corroded, seized or damaged
•   If the nut thread is worn or the locking function is compromised
•   During suspension or steering overhaul work
•   After accident repair or chassis component replacement
•   When restoring the car with correct OE Porsche hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909

The product you are viewing cross references to these numbers

Outer ball joint pin rebuild kit for Front bump RSS toe steer link/arm. Fits Part # 370 + 371



Kit includes: 1x Tapered Stud, 1 x Upper Lock Nut, 1 x Lower Lock Nut, 2 x Stud Spacers/Washers.

USER NOTE: A new 382 Kit should be installed once ball joint pin has been removed from hub.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

382

The product you are viewing cross references to these numbers

Lock nut for Steering rack tie rod end, M12 x 1,5
This OE Match lock nut is an M12 x 1.5 replacement fastening nut used on the steering rack tie rod end assembly of various Porsche models. It is designed to match the original Porsche-style fitment and provide a secure locking connection at the steering linkage.
Sold individually, 2 required per vehicle

Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Boxster 982 (718) 2017 >>
Porsche Cayman 987C.1 2005 - 2008
Porsche Cayman 987C.2 2009 - 2012
Porsche Cayman 981C 2012 - 2016
Porsche Cayman 982C (718C) 2017 >>
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 10

This lock nut fits on the steering linkage assembly, at the steering rack tie rod end connection. It is used to secure the tie rod end adjustment position and maintain correct steering geometry. Depending on the model, it may be used on the left or right side steering tie rod assembly.

Functions
•  Secures the steering rack tie rod end in place
•  Helps maintain correct steering alignment and toe adjustment
•  Prevents the tie rod end from loosening during use
•  Supports accurate steering control and stable handling
•  Helps reduce steering play, vibration, or unwanted movement
•  Provides an OE Match replacement for the original locking nut
•  Suitable for steering rack, tie rod end, and alignment-related repairs

Steering lock nuts are important safety-related fasteners and can lose locking strength after removal. They may also become corroded, rounded, seized, or damaged during steering and suspension repairs. Replacing the lock nut helps ensure the tie rod end remains securely fixed and correctly adjusted after service or wheel alignment.

When to replace
•  The steering rack tie rod end has been removed or replaced
•  The tie rod end has been adjusted during wheel alignment
•  The original nut is corroded, rounded, seized, or damaged
•  The nut no longer tightens or locks securely
•  There is play, looseness, or vibration in the steering linkage
•  Steering rack or front suspension repairs are being carried out
•  The nut has been removed and should not be reused

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909

The product you are viewing cross references to these numbers