Track rod rear suspension. Porsche 95B Macan  ›  PAB501529B

Rear Suspension Track Rod – fits left or right hand side

OE Match rear suspension track rod for Porsche 95B Macan models from 2014 onwards. The same track rod is suitable for either the left or right-hand side of the rear suspension and provides a direct replacement for a worn, damaged or corroded original component.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
• Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
• Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
• Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan T Petrol 2.0L (265Bhp) 2022>>
• Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
• Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>  

The rear track rod, also known as a rear toe link or track control arm, forms part of the Macan's multi-link rear suspension. It helps locate the rear wheel and maintain the correct toe alignment as the suspension moves, contributing to stable handling, predictable cornering and even tyre wear.

What Does the Rear Track Rod Do?

The rear track rod helps control the position and toe angle of the rear wheel relative to the chassis. Maintaining the correct rear toe setting is important for straight-line stability, predictable cornering and consistent tyre contact with the road.

As suspension loads change during acceleration, braking and cornering, the track rod and its bushes help prevent unwanted movement that could alter the rear wheel alignment.

Why Does It Fail?

The track rod and its mounting bushes are continually subjected to suspension movement, road impacts and changing loads. Over time, wear can develop through:

• Deteriorated or softened suspension bushes
• High mileage
• Pothole or kerb impacts
• Corrosion
• Accident damage
• Age-related deterioration
• Repeated heavy suspension loading

Worn bushes can allow the rear wheel geometry to shift under load, affecting handling and tyre wear.

When Should It Be Replaced?

Possible symptoms of a worn rear track rod or its bushes include:

• Knocking or clunking from the rear suspension
• Rear-end instability
• Uneven rear tyre wear
• Difficulty maintaining correct wheel alignment
• Excessive suspension movement
• Changes in handling during acceleration or braking
• Visible damage or deterioration of the arm or bushes

Similar symptoms can be caused by other suspension components, so the complete rear suspension should be inspected before replacement.

Checks During Replacement

When replacing the rear track rod, also inspect:

• Track rod bushes
• Opposite rear track rod
• Upper and lower rear control arms
• Rear wheel bearings
• Anti-roll bar links and bushes
• Dampers and suspension mounts
• Associated mounting bolts and fasteners

Rear wheel alignment should be checked after replacement to ensure the suspension geometry and toe settings are correctly adjusted.

Porsche 95B Macan Rear Track Rods & Suspension Control Arms

The Porsche Macan uses a multi-link rear suspension system designed to control wheel movement and maintain accurate geometry as the vehicle accelerates, brakes and corners. Rear track rods play an important role in maintaining the correct rear wheel toe setting.

Wear in the track rod or its bushes can introduce unwanted movement into the suspension. This may result in unstable handling, knocking noises, alignment problems and uneven tyre wear. Renewing worn components helps restore accurate rear suspension geometry and predictable handling.