Wheel hub, Front or Rear. Porsche 95B.1 Macan 2014-18 › PAC407613

OE Match wheel hub for Porsche 95B.1 Macan models from 2014–18, suitable for front or rear installation according to vehicle specification. The wheel bearing is not included.

Fits

Porsche 95B Macan 2014-18 FRONT / REAR

Vehicle-dependent installation sides

Check fitment for your specific vehicle (model, year, engine) before ordering.

Diagram ref no: 3

What This Product Does

The hub provides the mounting interface for the road wheel and brake disc, working with a separate bearing to support rotation. This component is the wheel hub, rather than the surrounding wheel carrier or the bearing itself.

Functions

• Provides a mounting face for the wheel and brake disc.
• Works with the wheel bearing to support the rotating assembly.
• Transfers driving and braking loads through the wheel assembly.
  
  

Technical Details

• Product references: 8K0407613B and PAC407613.
• Installation position: Front or Rear, dependent on application.
• Thickness: 72 mm.
• Internal diameter: 44 mm; external diameter: 142 mm.
• Bolt circle diameter: 112 mm.
• Bearing supplied separately; bearing reference: 95B407625A.
  
  

Symptoms of Fault

• Persistent bearing noise after earlier bearing renewal, potentially indicating damage at the hub seat.
• Movement at the wheel or vibration requiring investigation.
• Brake judder where the hub mounting face is distorted.
• Corrosion or surface damage preventing the bearing from seating correctly.
  
  

These signs are not conclusive evidence of hub failure. Inspect the bearing, brake components and adjoining suspension parts before deciding which component needs renewal.

Why Replacement Matters

Renewal is appropriate when inspection identifies a damaged bearing seat, a distorted mounting face or corrosion affecting assembly fit. Replacing a bearing alone may leave the underlying problem unresolved if its supporting hub is also damaged. OE Match focuses on Porsche applications, using component specifications and application checks within its replacement-parts programme.

FAQs

Must the hub be renewed with every bearing?
Not automatically. Assess the bearing seat and mounting face, and replace the hub if wear or damage makes it unsuitable for reuse.

Are fresh fixings needed?
Check the vehicle-specific repair procedure for fasteners that require renewal; do not assume fitting hardware accompanies the hub.

What should be checked during fitting?
Inspect and clean the mating surfaces, then use suitable pressing and support equipment to avoid damaging the bearing during assembly.