Lower Wishbone, Front. Porsche 970 Panamera >>2013 › 97034105

This OE Match front lower wishbone is a replacement suspension control arm for Porsche 970 Panamera models up to 2013. It forms part of the wheel-locating suspension assembly, connecting the wheel carrier to the vehicle through its joints and mountings.

Fits

• Porsche 970 Panamera >>2013
  
  This is for cars up to 2013. Left lower reference: 97034105304. Right lower reference: 97034105404. Match the reference to the side required; these are separate side-specific applications, not confirmation of a supplied pair.
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  Diagram ref no 1
  
  What Is This Part?

A wishbone, also called a control arm, is a hinged link within the suspension. It locates the wheel carrier relative to the chassis while allowing the suspension to move through its travel. Its mounting bushes and joints provide the movement needed at the connections, while the arm maintains the relationship between them. Wear at those connections can affect wheel control even when the arm itself appears undamaged. 

What Does This Part Do?

• Locates the wheel: Connects the wheel-carrying suspension assembly to the chassis.
• Allows suspension travel: Pivots through its connections as the wheel moves over changes in the road.
• Supports suspension geometry: Helps maintain the intended position of the wheel carrier during movement.
• Works with the mounting bushes: Combines controlled movement at the connections with a defined wheel-locating link. 
  
  Why Replace This Part?

Replacement may be needed if inspection identifies a bent or cracked arm, excessive joint play, or deterioration at its mounting bushes. Repeated suspension loads, environmental exposure and impact damage can affect the arm or its connections. A worn connection can allow unwanted wheel movement, contributing to noise, imprecise steering or irregular tyre wear. 

Confirm which component is worn before choosing between an arm replacement and a bush or joint repair. Knocking or wandering can originate elsewhere in the suspension, so replacing the wishbone without checking the adjoining components may leave the original fault unresolved. 

When to Replace This Part?

• Confirmed play: Inspection finds excessive movement at the arm's joints or mounting connections.
• Damaged bushes: Bushes show significant splitting, separation or deterioration affecting their support.
• Structural damage: The arm is bent, cracked or damaged following an impact.
• Suspension noise: Knocking or creaking has been traced to this arm or its connections.
• Wheel-control concerns: Wandering, vibration or uneven tyre wear is accompanied by confirmed arm, joint or bush wear. These symptoms alone do not identify the faulty component. 
  
  Where Is This Part Fitted?

Location: In the lower part of the front suspension, between the chassis-side mounting arrangement and the wheel carrier. The applicable references distinguish the left lower arm, 97034105304, from the right lower arm, 97034105404.

FAQs

• Should both sides be replaced together?
  Inspect both sides, but base replacement on their condition. These references identify left- and right-hand applications; they do not establish that both arms are supplied.
• Is wheel alignment needed afterwards?
  Arrange a wheel-alignment check after replacement and have the geometry adjusted as required.
• Can only the bushes be replaced?
  This depends on the condition of the arm and joints and whether suitable separate repair components are available for the exact application. Assess the complete assembly before deciding.
  
  Product Summary

• Product: Front lower suspension wishbone / control arm.
• Brand: OE Match.
• Left lower reference: 97034105304.
• Right lower reference: 97034105404.
• Purpose: Locates the front wheel carrier while allowing suspension movement.