Turn signal indicator Genuine Porsche part 90163140200

Front indicator lens, without Rim,  Short Wheel Base Cars.
Size approx: 30cm x 6cm
With E-mark approval.

Fits:
Porsche 911 1965 - 1968 Short Wheel Based cars (SWB)
Porsche 912 1965 - 1968 Short Wheel Based cars (SWB)

NOTE: Please check the lenses you have are the same dimensions.


The Left (OE ref no 90163140100 and Right (OR ref no 90163140200) Front Indicator Lenses are OE Match replacement lenses designed for the front turn signal assemblies of early Porsche 911 models from 1965 to 1969. These lenses are supplied without chrome rim, matching the original factory specification for these early vehicles. Ideal for classic restoration projects or to replace aged or damaged lenses, they help restore correct lighting performance and preserve the authentic look of your early 911.

Installed over the front indicator lamp sockets, these lenses hold the signal bulb and secure it within the housing, shielding it from moisture, dust, and debris. They help maintain proper optical output and legal signal visibility while preserving the vehicle’s original exterior styling.

Front indicator lenses can become cracked, faded, or discoloured over time, reducing visibility and detracting from the vehicle’s classic look. Replacing them with OE Match lenses restores clear signalling performance and helps maintain the authentic appearance of your early Porsche 911.

When to replace:
•  Lens is cracked, cloudy, or faded
•  Signal light output appears dim or inconsistent
•  During restoration or bodywork
•  After removal of indicator housing for servicing
•  As part of preventive exterior maintenance

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Front Indicator Lens Seals for Short Wheelbase Cars

Maintain the weatherproof integrity and originality of your classic Porsche lighting system with Front Indicator Lens Seals, designed specifically for Porsche 911 Short Wheel Base (SWB) models produced between 1965 and 1968. These seals fit between the front indicator lenses and lamp housings, creating a protective barrier that prevents moisture, dirt and road contaminants from entering the indicator assembly.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)       

Although often overlooked during maintenance and restoration work, indicator lens seals play a critical role in protecting internal lighting components and ensuring long-term reliability. A correctly fitted seal helps preserve bulb holders, electrical connections and reflectors while maintaining the factory-correct fit and appearance of the indicator unit.

For restoration projects, concours preparation and routine maintenance, replacing ageing indicator seals is a simple but essential step in preserving both functionality and originality.

What Do Front Indicator Lens Seals Do?

Front indicator lens seals create a watertight gasket between the lens and lamp housing.

Their primary functions include:

Preventing water ingress Protecting electrical components Reducing internal corrosion Preventing dirt and debris contamination Helping maintain lens clarity Supporting long-term lighting reliability Preserving original fitment and appearance

A properly functioning seal helps ensure indicator assemblies remain protected from environmental damage.

Symptoms of Seal Wear or Failure

Rubber seals naturally deteriorate over time due to exposure to UV light, weather conditions, heat cycles and age.

Common signs of worn indicator lens seals include:

Cracked or hardened rubber Water inside the indicator housing Condensation behind the lens Corroded bulb holders or terminals Flattened or compressed seal profiles Dirt accumulation inside the lamp unit Poor lens fitment Visible deterioration during inspection

Once a seal loses flexibility, it can no longer effectively protect the lamp assembly.

Why Replacement Matters

Replacing worn front indicator lens seals helps protect expensive lighting components and maintain the authenticity of your classic Porsche.

Benefits include:

Prevention of water ingress Reduced risk of corrosion Protection of bulbs and wiring Improved lamp assembly longevity Restoration of factory-correct fitment Better weather resistance Improved restoration quality Preservation of vehicle originality

For early Porsche 911 SWB models, attention to small details such as indicator seals can significantly improve both vehicle presentation and long-term reliability.

Features & Benefits

• Suitable for Porsche 911 SWB models (1965-1968)
• Creates a weatherproof seal between lens and housing
• Helps prevent moisture and dirt ingress
• Protects internal electrical components
• Restores correct lamp assembly fitment
• Ideal for restoration and maintenance projects
• Direct replacement for aged or damaged seals

Keep your classic Porsche lighting system protected and performing correctly with Front Indicator Lens Seals 90163141300 and 90163141400 from Design911.

Porsche Lighting Seals, Indicator Gaskets & Restoration Components

Porsche Lamp Seals for Classic Restoration Projects

Design911 supplies a comprehensive range of Porsche indicator lens seals, headlamp gaskets, rear light seals, lamp housing rubbers and restoration components for classic Porsche models. Whether you're completing a concours restoration or replacing deteriorated rubber components, our range helps ensure correct sealing and long-term protection.

Lighting seals are critical to preserving the condition of lamp assemblies. By preventing moisture ingress and contamination, they help maintain reliability while protecting original lighting components from corrosion and premature wear.

Replacing aged seals is one of the simplest and most cost-effective ways to improve both reliability and restoration quality.

Why Replace Porsche Indicator Lens Seals?

Benefits include:

Improved weather protection Prevention of water ingress Reduced corrosion risk Longer lamp assembly lifespan Better restoration authenticity Improved fitment and appearance Protection of electrical components Preservation of classic Porsche originality       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163141

The product you are viewing cross references to these numbers

Indicator lens seal, Rear.

Fits:
Porsche 911/912 >>1968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163141

The product you are viewing cross references to these numbers

Indicator Unit Front.



Design and made in METAL casing complete with wiring. Please this version does not have a hole for a side light bulb in the first compartment this will need to be modified if you require a side light (OE Ref: PCG63193520 / PCG63193620)

Fits:
Porsche 911 1969-73

Price is for each.

Right or left side
Select below please

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG63193

The product you are viewing cross references to these numbers

Indicator unit with lens rear for Early Porsche 911 1965-68 Short Wheel Base Cars



Fits:
Porsche 911 1965-68 SWB
Porsche 912 1965-68 SWB

Rear Indicator unit the housing is made of plastic so it will not corrode, Retro Line after- market product. Complete with bulb holders, bulbs, wires and gasket

Replacement for original Porsche part numbers 90163140300, 90163140400 which are no longer available

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Indicator unit with lens & seal (SWB).
Size approx.: 30cm x 6cm



Fits:
Porsche 911 1965-68 Short Wheel Based cars (SWB)
Porsche 912 1965-68 Short Wheel Based cars (SWB)
Please check the lenses you have are the same dimensions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Indicator lens Front, without rim for USA cars .
Size approx.: 30cm x 6cm



Fits:
Porsche 911/912 1965-68 Short Wheel Based cars (SWB) for USA cars

Please check the lenses you have are the same dimensions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers

Indicator unit with lens & seal (SWB) for USA cars
Size approx.: 30cm x 6cm



Fits:
Porsche 911 1965-68 Short Wheel Based cars (SWB) for USA cars
Porsche 912 1965-68 Short Wheel Based cars (SWB) for USA cars

Please check the lenses you have are the same dimensions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163140

The product you are viewing cross references to these numbers