1 set of ignition leads Genuine Porsche part 91160906100

Ignition HT Lead Set.



Fits:
Porsche 911SC 2.7L, 3.0L 1975>>
Porsche 930 3.3L 1975-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160901007

The product you are viewing cross references to these numbers

Ignition HT lead set. Porsche 911 1965-74

Fits:
Porsche 911 1965-74

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160606100

The product you are viewing cross references to these numbers

Ignition coil to distributor ignition lead, Single.



Fits:
Porsche 911SC 2.7L, 3.0L 1975>>
Porsche 930 3.3L 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160906107

The product you are viewing cross references to these numbers

Ignition HT Lead Set 

Restore the ignition performance of your classic air-cooled Porsche with this Ignition HT Lead Set. This complete set delivers reliable high-voltage transmission from the ignition distributor to each spark plug, ensuring efficient combustion and smooth engine operation.

Fits:

• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

The HT (High Tension) leads play a vital role within the ignition system by carrying thousands of volts generated by the ignition coil to the spark plugs. This electrical energy creates the spark that ignites the air and fuel mixture inside each cylinder, allowing the engine to produce smooth, efficient and reliable power.

Manufactured to OE Match standards, these ignition leads provide excellent insulation, precise fitment and dependable electrical performance, making them ideal for routine servicing, engine rebuilds or ignition system restoration.

Why Do Ignition HT Leads Fail?

HT leads operate in one of the harshest environments on the vehicle. Positioned around the engine, they are constantly exposed to high temperatures, vibration, oil vapours and moisture. Over time, the insulation naturally deteriorates, allowing electrical current to leak before it reaches the spark plug.

The internal conductor can also degrade with age, increasing electrical resistance and reducing spark energy. Cracked insulation, hardened boots or corrosion at the terminals can all contribute to ignition problems, particularly under heavy engine load or in damp conditions.

On turbocharged engines such as the Porsche 930, where higher cylinder pressures require a stronger ignition spark, deteriorated HT leads can become even more noticeable, leading to reduced performance and poor combustion.

When Should HT Leads Be Replaced?

Ignition leads should be inspected during routine servicing and replaced whenever there are signs of deterioration or ignition performance begins to suffer.

Common signs include:

• Engine misfires Rough idle
• Hesitation under acceleration
• Difficult starting
• Reduced fuel economy
• Visible cracks or damage to the insulation
• Hardened or split rubber boots
• Corroded electrical terminals
• During a complete ignition tune-up or engine rebuild

Replacing the complete lead set ensures balanced ignition performance across all cylinders and helps maximise the lifespan of the spark plugs, distributor cap and rotor arm.

Key Features

• Complete ignition HT lead set
• Restores efficient spark delivery
• High-quality insulation for reliable performance
• Precision manufactured for accurate fit
• Helps eliminate ignition misfires and rough running
• Ideal for servicing, restoration and engine rebuilds

Porsche 911 SC & 930 Turbo Ignition Components

A healthy ignition system is essential to maintaining the performance and character of every air-cooled Porsche engine. The HT lead set forms the link between the ignition coil, distributor and spark plugs, ensuring each cylinder receives the correct spark at precisely the right time.

As ignition components age together, replacing the HT leads alongside the spark plugs, distributor cap and rotor arm helps restore the crisp throttle response, smooth idle and dependable reliability expected from the Porsche flat-six.

Whether you're maintaining a regularly driven 911 SC or preserving the performance of a classic 930 Turbo, renewing ageing ignition components is an important part of preventative maintenance.

Benefits of Replacing the HT Lead Set

• Restores full ignition performance
• Delivers stronger, more consistent spark energy
• Improves starting and idle quality
• Helps eliminate ignition misfires
• Supports improved fuel efficiency
• Reduces stress on other ignition components
• Ideal for complete ignition servicing       

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160901007

The product you are viewing cross references to these numbers

Ignition HT lead set, 7mm Electrosports. 



Fits:

Porsche 911 3.2 Carrera - 1984 to 1989

Ignition HT lead set for an unmodified engine with the coil in its original location. 
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead (king lead) is 21.5 inches long - Please check original item. 
HT lead set comes in black 

SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.on HT lead set, 7mm Electrosports. 

Leads are Special Order. Please allow 2-3 weeks for delivery

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6714

The product you are viewing cross references to these numbers

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 911 SC 3.0ltr - 1978 to 1983
Porsche 911 turbo 3.0ltr - 1975 to 1977
Porsche 911 turbo 3.3ltr - 1978 to 1989
For cars with K-Jetronic fuel injection only

Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black 

Conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6704

The product you are viewing cross references to these numbers

Ignition HT lead set, 7mm Electrosports. 

Fits:
Porsche 911 T / E  / S 2.2ltr  - 1970 to 1971
Ignition HT lead set for an unmodified engine with the coil in its fan housing original location.

Set comes with 6 x HT leads and 1 x coil lead (king lead) 
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black 

Conventional DIN fitting on the coil. Only to be used with original type coil

Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life. 
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. 

Leads are individually numbered for ease of installation

Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

• Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression. 
• Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. 
• Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

Leads are Special Order. Please allow 2-3 weeks for delivery

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

67217

The product you are viewing cross references to these numbers