Tonneau Cover

Cabriolet hood tonneau cover.

Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

Please choose black or beige inner lining

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456109501

The product you are viewing cross references to these numbers

Cabriolet hood with clear rear screen.
Porsche 356 with beige headiner

Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with beige headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108201

The product you are viewing cross references to these numbers

Cabriolet hood with clear rear screen.
Porsche 356 with grey headiner

Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with grey headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108206

The product you are viewing cross references to these numbers

OE Match chrome-plated Tenax female button for hood-cover attachment, supplied individually.

Fits

Porsche 356 B Cabriolet from 1960 to 1963 - Quantity required for 356: 12
Porsche 356 C Cabriolet from 1964 to 1965 - Quantity required for 356: 12
Porsche 911 Targa from 1967 to 1971 - Quantity required for 911: 13
Porsche 912 Targa from 1967 to 1969 - Quantity required for 911: 13

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

This female fastener forms the upper portion of a Tenax attachment, connecting the hood cover to its corresponding mounting point. It is a fastening component rather than a complete cover or roof assembly.

Functions

• Provides the female connection for the hood-cover fastening arrangement.
• Replaces an individual missing or damaged upper fastener.
  
  

Technical Details

• Brand: OE Match.
• Component: female Tenax button with chrome-plated finish.
• Existing record reference: 99959160212.
• Internal diagram part reference: 99959160112, described as a Tenax upper part or Catch GHE 33.
• Diagram quantities: 13 for the listed 911 Targa assemblies and 12 for the 356B / 356C Cabriolet assembly. These are vehicle requirements, not pack contents.
  
  

Why Replacement Matters

Renewing a missing or damaged cover fastener restores that attachment point without replacing the entire cover. Compare the existing female button, its mating fitting and the supplied references before installation, particularly because the existing record and internal diagrams carry different numbers.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160112

The product you are viewing cross references to these numbers

OE Match male Tenax fastening stud for Porsche 356 Cabriolet and 911 Targa. The supplied specification is M5 x 100 with a chrome-plated finish.

Price is each

Fits

• Porsche 356 preA - 1950–1955
• Porsche 356 A T1 - 1955–1957
• Porsche 356 A T2 - 1958–1959
• Porsche 356 B T5 - 1960–1961
• Porsche 356 B T6 - 1962–1963
• Porsche 356 C - 1964–1965/66
• Porsche 911 - 1965-1969
• Porsche 912 - 1965–1969
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

This stud forms the male component of a Tenax fastening connection used with compatible roof or cover fittings. It is an individual fastening component rather than a complete cover or roof assembly.

Technical Details

• Brand: OE Match.
• Product reference: 99959160412.
• Fastener type: male Tenax stud.
• Supplied specification: M5 x 100.
• Finish: chrome-plated.
  
  

Why Replacement Matters

Missing or damaged fastening hardware should be assessed alongside the mating fitting and its mounting point. Confirm the original stud specification before replacement; a similar appearance alone does not establish suitability.

FAQs

Which Porsche body styles are specified?
The product identification names the 356 Cabriolet and 911 Targa. Supplied application information also includes the 912; confirm the fastening arrangement on the individual vehicle.

Is this a complete Tenax fastening assembly?
The product is identified as a male stud. A mating fastener, cover, seals or additional mounting hardware are not specified as included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160412

The product you are viewing cross references to these numbers

This chrome-plated Tenax male stud from OE Match provides a hood-cover fastening point for Porsche 356 Cabriolet and early 911 / 912 Targa applications. It is the male component rather than the mating upper catch.

Fits

• Porsche 356 B Cabriolet from 1960 to 1963 - Quantity required for 356: 12
• Porsche 356 C Cabriolet from 1964 to 1965 - Quantity required for 356: 12
• Porsche 911 Targa from 1967 to 1971 - Quantity required for 911: 13
• Porsche 912 Targa from 1967 to 1969 - Quantity required for 911: 13
  
  

Check fitment for your specific vehicle (model, year, engine) before ordering.

What This Product Does

The stud forms the fixed male side of the Tenax connection, engaging with the corresponding catch on the hood cover. This is a fastening component, not a complete cover or roof assembly.

Functions

• Provides the male attachment point for the matching Tenax catch.
• Retains the hood cover at its fastening position.
  
  

Technical Details

• Part reference: 99959160212.
• Chrome-plated male Tenax stud.
• The 356B / 356C 1960–65 convertible-top diagram identifies it as tapping screw GHE 21, item 34, with 12 required.
• The 356B / 356C 1960–65 Cabrio interior-equipment diagram also records this reference as item 7, with two required for that assembly.
• Price is each.
  
  

Why Replacement Matters

Renewing missing or damaged fastening hardware helps restore the cover's attachment. Check the mating catch and surrounding cover material as well: replacing the stud alone will not correct damage elsewhere in the fastening assembly.

FAQs

• Is this the upper catch?
  No. This component is the male stud; the diagram identifies the upper catch separately.
• How many are needed?
  The supplied hood-cover application notes specify 12 for the 356 and 13 for the listed Targa models. These are vehicle requirements, not pack quantities.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99959160212

The product you are viewing cross references to these numbers