Front Wiper Arms & Blades

Front Wiper blade set. BLACK

Fits:
Porsche 356 A/540.1
Porsche 356 B-T5 COUPE / CABRIO
Porsche 356 B-T6
Porsche 356 C

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462831110

The product you are viewing cross references to these numbers

Inner and Outer Grommet Set for Windscreen Wiper Shaft

The OE Match Inner and Outer Grommet Set is designed to seal the windscreen wiper shaft where it passes through the bodywork of the Porsche 356.

Fits:

• Porsche 356B 1959-63
• Porsche 356C 1963-65

Diagram ref no 31 and 32

These replacement grommets help prevent water, dirt and moisture entering around the wiper spindle, protecting surrounding components and maintaining the original appearance of the vehicle.

What Does It Do?

The grommets provide a protective seal around the windscreen wiper shaft where it passes through the vehicle body.

They help prevent water ingress, reduce unwanted movement and protect the surrounding metalwork from moisture-related deterioration.

Why Does It Fail?

Common causes include:

• Age-related rubber deterioration
• Exposure to sunlight and weather
• Hardening, cracking or splitting
• Compression and loss of flexibility
• Damage during wiper mechanism servicing

When Should It Be Replaced?

Replace if the grommets are cracked, brittle, missing or no longer seal securely around the wiper shaft.

Replacement is also recommended during windscreen wiper restoration, bodywork repairs or a full Porsche 356 rebuild.

Checks & Installation

Inspect the wiper shaft, surrounding bodywork and existing seals for corrosion or damage.

Remove the deteriorated grommets and clean the mounting area before fitting the replacements.

Ensure the inner and outer grommets are correctly seated and that the wiper mechanism operates freely after installation.

Key Features

• OE Match replacement wiper shaft grommet set
• Includes inner and outer sealing grommets
• Designed for compatible Porsche 356 wiper assemblies
• Helps prevent water and dirt ingress
• Replaces hardened, cracked or missing seals
• Ideal for classic Porsche restoration and servicing

Porsche 356 Windscreen Wiper Shaft Seals & Rubber Grommets

Windscreen wiper shaft grommets are important sealing components on classic Porsche 356 vehicles, helping protect the bodywork and wiper mechanism against moisture and contamination.

Over time, original rubber seals can deteriorate, allowing water to enter around the wiper spindle.

The OE Match Inner and Outer Grommet Set 64462829212 provides a replacement solution for compatible Porsche 356 windscreen wiper assemblies.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462829212

The product you are viewing cross references to these numbers

This OE Match windscreen wiper cap nut is a replacement fastening component for Porsche 356 wiper assemblies. 

Fits

• Porsche 356 B-T6
• Porsche 356C

Diagram reference 36

What This Product Does

The cap nut forms part of the windscreen wiper assembly, fitting at the wiper shaft and arm connection. It replaces a missing, damaged or deteriorated fastener while maintaining the correct arrangement of the original-style wiper hardware.

Functions

• Fits the windscreen wiper shaft assembly
• Helps retain the wiper arm connection
• Covers the exposed threaded fastening point
• Supports a tidy, period-correct wiper installation

Technical Details

• Brand: OE Match
• Component: windscreen wiper cap nut

Symptoms of Fault

• Cap nut missing from the wiper shaft
• Visible corrosion or surface deterioration
• Damaged threads preventing correct fastening
• Loose or incomplete wiper arm hardware

Why Replacement Matters

Replacing a worn or absent cap nut restores the correct fastening arrangement at the wiper shaft. It is also suitable when renewing weathered wiper hardware during maintenance or restoration work.

FAQs

• Is this a complete wiper assembly?
  No. This product is the individual windscreen wiper cap nut.
• Which Porsche models does it fit?
  It is listed for Porsche 356 B-T6 and 356C models.
• Where is the part shown on the assembly diagram?
  The cap nut is identified as diagram reference 36.

Check fitment for your specific vehicle model and year before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462828412

The product you are viewing cross references to these numbers

Windshield Wiper Arm Shaft with Bearing and Crank
Sold each – 2 required per car

The OE Match Windshield Wiper Arm Shaft with Bearing and Crank is a replacement component for the windscreen wiper mechanism.

Fits:

• Porsche 356B 1959-63
• Porsche 356C 1963-65

Diagram ref no 28

This assembly connects the wiper linkage to the external wiper arm, allowing the motor's movement to operate the windscreen wipers smoothly and reliably.

What Does It Do?

The shaft transfers movement from the wiper linkage to the wiper arm. The bearing supports smooth rotation, while the crank connects the shaft to the operating linkage.

Why Does It Fail?

Common causes include:

• Corrosion and seized shaft bearings
• Wear from repeated wiper operation
• Deterioration of internal bearing surfaces
• Damaged or loose crank connections
• Moisture entering the mechanism

When Should It Be Replaced?

Replace if the shaft is seized, excessively worn, bent or damaged.

Common symptoms include slow or uneven wiper movement, excessive play, unusual noises or a wiper arm that fails to operate correctly.

Checks & Diagnosis

Inspect the shaft, bearing, crank and connecting linkage for wear, corrosion or restricted movement.

Check that the wiper motor operates correctly and that both wiper arms move freely without binding.

Key Features

• OE Match replacement wiper arm shaft assembly
• Includes shaft, bearing and crank
• Suitable for Porsche 356 B and 356 C
• Transfers wiper linkage movement to the wiper arm
• Ideal for classic Porsche wiper system restoration
• Sold individually – 2 required per car

Porsche 356 B / 356 C Windscreen Wiper Shafts & Linkage Parts

The Porsche 356 windscreen wiper system relies on correctly functioning shafts, bearings, cranks and linkage components to maintain smooth, consistent wiper operation.

Replacing worn or seized wiper shaft assemblies helps restore reliable windscreen clearing and correct operation of the original wiper mechanism.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462802512

The product you are viewing cross references to these numbers

Windshield Wiper metal cap. 2 required, price is for each.

Fits:
Porsche 356 B-T6
Porsche 356 C

Click 'Zoom in' for large parts diagram.
Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462828312

The product you are viewing cross references to these numbers

Wiper arm rubber flap

Fits:
Porsche 356 B-T6 / 356 C 1960-65

Click 'Zoom in' for large parts diagram.
Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462828112

The product you are viewing cross references to these numbers

Front Wiper Arm Rubber Flap 
Sold each - 2 required per car

Complete your Porsche 356 restoration with this OE Match Front Wiper Arm Rubber Flap, manufactured to replicate the original factory specification. This small but essential rubber component fits around the front windscreen wiper arm assembly, helping to seal the opening where the wiper spindle passes through the bodywork.

Fits:

• Porsche 356B 1959-63
• Porsche 356C 1963-65

Diagram ref no 33

Often overlooked during restoration, the rubber flap contributes to both the appearance and protection of the front scuttle area by helping to reduce the ingress of water, dirt and debris into the wiper mechanism and luggage compartment.

Manufactured from high-quality, weather-resistant rubber, this OE Match replacement provides the correct profile, flexibility and fit required for authentic Porsche 356 restoration projects.

What Does the Wiper Arm Rubber Flap Do?

The front wiper arm rubber flap performs several important functions within the windscreen wiper assembly.

Its primary roles include:

• Providing a protective seal around the windscreen wiper spindle.
• Helping prevent water entering the front luggage compartment and wiper mechanism.
• Reducing the ingress of dirt, dust and road debris.
• Protecting the bodywork around the wiper mounting point.
• Providing a neat, factory-correct finish around the wiper arm.

Although a small component, it plays an important role in preserving both the appearance and integrity of the front bodywork.

Why Does the Wiper Arm Rubber Flap Fail?

Rubber components naturally deteriorate over time due to constant exposure to the elements.

Common causes of failure include:

• UV exposure causing the rubber to harden and crack.
• Age-related perishing.
• Damage during wiper arm removal or replacement.
• Shrinkage reducing the sealing effectiveness.
• Continuous exposure to rain, heat and road contaminants.
• Loss of elasticity after many years of service.

As the rubber deteriorates, it can no longer provide an effective seal, allowing moisture and debris to reach areas that should remain protected.

When Should It Be Replaced?

Replacement is recommended when:

• The rubber has become cracked or split.
• The flap has hardened or lost its flexibility.
• Water is entering around the wiper spindle.
• The original flap is missing.
• Replacing or refurbishing the windscreen wiper system.
• Completing a concours or factory-correct Porsche 356 restoration.

Replacing worn rubber seals during restoration helps maintain the originality of the vehicle while protecting surrounding components from moisture damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462828112

The product you are viewing cross references to these numbers

Wiper blade set.

Fits:
Porsche 356 C (1963 - 1965) Coupe
Only for left-hand-drive vehicles.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64462831113

The product you are viewing cross references to these numbers