Indicator / Wiper Stalk Switch

Indicator / wiper switch handle.

Fits:
Porsche 911/912 1965-73
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155285300

The product you are viewing cross references to these numbers

Indicator / Wiper Switch Handle

The OE Match Indicator / Wiper Switch Handle is a replacement grip for the steering column indicator and windscreen wiper control levers fitted to classic Porsche 911, 912 and 914 models.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 914 (1970-1976)

Diagram ref no 3

Designed to replace worn, cracked, damaged or missing original handles, this component helps restore the appearance and ease of operation of the steering column controls.

Its original-style design makes it an ideal replacement for classic Porsche interior restoration, maintaining the factory appearance without replacing the complete electrical switch assembly.

What Does the Indicator / Wiper Switch Handle Do?

The switch handle provides a comfortable gripping surface for operating the indicator or windscreen wiper stalk.

It allows the driver to move the control lever easily while protecting the end of the switch mechanism.

Although a relatively small component, the handle contributes to the appearance and usability of the dashboard and steering column controls.

Why Does It Fail?

Original switch handles can deteriorate after decades of use due to age, sunlight, temperature changes and repeated handling.

Common causes of failure include:

• Hardening or cracking of the original material
• Wear from frequent use UV exposure and heat damage
• Splitting around the lever mounting point
• Accidental damage during steering column repairs
• Missing handles following previous restoration work

A damaged handle may become loose or uncomfortable to operate, while a missing handle leaves the end of the control lever exposed.

When Should It Be Replaced?

Replacement is recommended when the original indicator or wiper switch handle becomes cracked, loose, damaged or missing.

Common signs include:

• Visible cracks or splits
• A loose or poorly fitting handle
• Excessive wear or deterioration
• Difficulty gripping the control lever
• An incomplete or untidy steering column appearance

Replacement is also worthwhile during a dashboard refurbishment or complete classic Porsche interior restoration.

Installation Notes

Carefully remove the damaged or deteriorated handle without bending or damaging the original switch lever.

Check the lever for corrosion, distortion or damage before installing the replacement handle.

Ensure the new handle is securely fitted and that the indicator or windscreen wiper control operates freely.

This component replaces the external handle only and does not repair faults within the electrical switch mechanism.

Porsche 911, 912 & 914 Indicator Switch Handles and Steering Column Parts

The indicator and windscreen wiper switch handles are important finishing components of the steering column controls fitted to early Porsche 911, 912 and 914 models.

After decades of use, original handles can become brittle, cracked or loose, affecting both the appearance and ease of operation of the control levers.

OE Match indicator / wiper switch handle provides a practical replacement for compatible Porsche 911 and 912 models manufactured between 1965 and 1973, together with Porsche 914 models from 1970 to 1976.

Replacing a damaged handle helps restore the original interior appearance without the expense of replacing a complete functioning switch assembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155285300

The product you are viewing cross references to these numbers

Indicator Stalk Handle.
Restore precise control and the original appearance of your Porsche's steering column with this OE Match Indicator Stalk Handle, manufactured as a direct replacement. Produced to OE-style specifications, this indicator stalk handle attaches to the turn signal switch assembly, allowing the driver to operate the direction indicators with smooth, positive engagement while maintaining the correct factory-style interior finish.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 12

Frequent use, age, UV exposure, and accidental damage can cause the original stalk handle to crack, loosen, become worn, or break completely. A damaged handle can make operating the indicators difficult and detract from the appearance of the steering column. Replacing a worn or broken indicator stalk handle restores both functionality and the authentic presentation of the driver's controls. This OE Match component is ideal for routine maintenance, steering column repairs, interior refurbishment, and Porsche restoration projects.  

What This Product Does:

• Provides manual operation of the vehicle's direction indicators.
• Attaches securely to the indicator switch assembly.
• Ensures comfortable and positive operation of the turn signals.
• Restores the original appearance of the steering column controls.
• Replaces cracked, loose, or broken original stalk handles.
• Supports reliable operation of the indicator switch.
• Provides an OE-style fit and dependable quality.

Symptoms Of Wear Or Failure:

• Cracked or broken indicator stalk handle.
• Loose handle on the indicator switch.
• Difficulty operating the direction indicators.
• Excessive wear from regular use.
• Faded or deteriorated finish.
• Missing or damaged original handle.
• Poor appearance of the steering column controls.

Why Replacement Matters:

• The indicator stalk handle is an important driver control component, providing comfortable and reliable operation of the vehicle's direction indicators while maintaining the original appearance of the steering column. A worn, cracked, or broken handle can make signalling difficult, reduce driver confidence, and detract from the quality of the vehicle's interior.
• Replacing the indicator stalk handle restores smooth operation, improves the appearance of the steering column controls, and helps preserve the authentic character of the vehicle. Manufactured as a direct replacement and produced to OE-style specifications, this OE Match indicator stalk handle provides the correct fit, dependable quality, and long-lasting durability, making it an excellent choice for Porsche maintenance, steering column repairs, interior refurbishment, and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455285305

The product you are viewing cross references to these numbers

Indicator Switch Tension Spring.

Fits:
Porsche 911/912 1965-73
Porsche 356B / 356C 1960-65
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Price shown is for each spring.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161335201

The product you are viewing cross references to these numbers

OE Match steering column indicator switch for Porsche 911 models from 1965–1968 and 912 models from 1966–1968. This replacement forms part of the steering column signalling controls.

Fits

• Porsche 911 1965 - 1968
• Porsche 912 1966 - 1968
  
  

What This Product Does

The column-mounted switch allows the driver to select the direction indicators. It is the indicator control component, rather than the separate wiper switch shown alongside it in the assembly diagrams.

Functions

• Provides driver control of direction signalling.
• Operates the indicator circuit through the steering column stalk.
  
  

Technical Details

• Supplied part reference: 90161330103.
• Identified in the supplied diagrams as a direction indicator switch or combined switch.
  
  

Symptoms of Fault

• Indicator selection fails to remain engaged.
• Signalling cuts out or works inconsistently.
• The stalk feels loose or does not respond.
• Indicators cancel unexpectedly or fail to cancel.
  
  

Why Replacement Matters

Renewing a confirmed faulty switch addresses unreliable signalling caused by worn contacts or mechanical engagement. OE Match focuses on Porsche replacement applications; matching the original reference and vehicle details remains important before fitting.

FAQs

Does an indicator fault always mean the stalk needs replacing?
No. Inspect the fuses, flasher relay, wiring, earth connections and relevant hazard-switch connections before condemning the column switch.

What can cause a cancellation problem?
Wear in the switch mechanism or damage to the cancellation cam can prevent normal return. Inspect the related components to establish the cause.

What should be checked before ordering?
Compare the original reference, mounting arrangement and electrical connections. Check fitment for your specific vehicle (model, year, engine) before ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161330103

The product you are viewing cross references to these numbers

Sticker set, wiper and turn signal.

Fits:
Porsche 911 2.0-2.7 08/67-07/73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155933000

The product you are viewing cross references to these numbers

Sticker set, wiper and turn signal.

Fits:
Porsche 911 (USA/CDN/J/S) 2.0-2.7 08/69-07/73
Porsche 914 1.7-2.0 01/69-07/70

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155933001

The product you are viewing cross references to these numbers

Wiper stalk column switch bottom half cover.

Fits:
Porsche 911 1968-73

Diagram ref no. 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161331201

The product you are viewing cross references to these numbers

Wiper stalk column switch bottom half cover.

Fits:
Porsche 911 1965-73

Diagram ref no. 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161331201

The product you are viewing cross references to these numbers

Wiper stalk column switch top half cover.

Fits:
Porsche 911 1965-73

Diagram ref no. 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161331101

The product you are viewing cross references to these numbers

Wiper Stalk Column Switch Top Half Cover 

Restore the original appearance of your Porsche steering column with this OE Match Wiper Stalk Column Switch Top Half Cover, manufactured to replicate the original factory specification. This upper steering column cover fits around the wiper stalk and steering column switch assembly, protecting the internal components while providing a clean, factory-correct finish.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Diagram ref no. 25

Ideal for restoration projects or replacing damaged or ageing trim, this OE Match component offers the correct fit, profile and finish expected for classic Porsche 911 models.

What Does the Wiper Stalk Column Switch Top Half Cover Do?

The upper steering column cover forms part of the steering column shroud surrounding the wiper and indicator switch assembly.

Its primary functions include:

• Protecting the steering column switch mechanism from dirt and accidental damage.
• Concealing wiring and electrical connections for a tidy factory appearance.
• Providing a mounting location for the upper section of the steering column trim.
• Helping keep the steering column assembly correctly aligned.
• Completing the original appearance of the dashboard and steering column.

Although it is not an electrical component, the cover is essential for protecting the switchgear and maintaining the finished appearance of the interior.

Why Does the Steering Column Cover Fail?

After decades of use, the original plastic cover can become worn or damaged.

Common causes include:

• Cracking caused by age and UV exposure.
• Damage during steering wheel or switch removal.
• Broken mounting tabs or fixing points.
• Scratches and wear from regular use.
• Heat-related warping or fading.
• Previous repairs or incorrect installation.

A damaged steering column cover can leave the switch assembly exposed and detract from the appearance of an otherwise well-maintained interior.

When Should It Be Replaced?

Replacement is recommended when:

• The original cover is cracked or broken.
• Mounting tabs have failed.
• The surface is scratched, faded or heavily worn.
• Replacing or servicing the steering column switch assembly.
• Restoring the vehicle's interior to factory specification.
• Completing a concours-quality restoration.

Replacing worn steering column trim helps restore the original finish of the cockpit while protecting the switch assembly beneath.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161331101

The product you are viewing cross references to these numbers

Wiper stalk column switch. A wiper switch made after the original.
The OE Match windscreen wiper stalk switch is intended for Porsche 911 and 912 F-Model applications from 1969 to 1973. Its design follows the original steering-column control.

Fits
Porsche 911 / 912 F-Model 1969 - 1973

Symptoms of Fault

Signs worth investigating include intermittent wiper response, unavailable speed settings or excessive looseness in the stalk. Similar symptoms can originate elsewhere in the electrical circuit, so diagnosis should precede replacement.

Why Replacement Matters

Renewing a confirmed faulty switch addresses worn contacts or a deteriorated operating mechanism. Inspect the wiring connections and associated wiper components before fitting a replacement.

FAQs

Does an unresponsive wiper system always indicate switch failure?
No. Check the fuses, connections, earth points and switch output before deciding which component needs replacement.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161330204

The product you are viewing cross references to these numbers