Dashboard RHD (Restoration)

Ashtray handle cover, Black Leatherette.

Fits:
Porsche 911 SC 1978-83
Porsche 911 1984-86

Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901552050257AE

The product you are viewing cross references to these numbers

Centre air vent.

Fits:
Porsche 911 1977-85
Porsche 930 Turbo >>1985

Options:
- Cars with air conditioning
- Cars without air conditioning

Please Select below

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115710670

The product you are viewing cross references to these numbers

Cover for heating nozzle (SET OF 2) Porsche 911/912

Fits:
Porsche 911/912 1969-86
Porsche 911 Turbo 1975-77

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155240910

The product you are viewing cross references to these numbers

Cover for heating nozzle

Fits:
Porsche 911/912 1969-86
Porsche 911 Turbo 1975-77

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115524

The product you are viewing cross references to these numbers

Dash Heating / Defroster Vent Trim.
Replacement dashboard heating/defroster vent trim on classic Porsche 911, 912 and 930 models (covering years 1969–1985). This trim piece fits into the dashboard under the windscreen and gives a finished, appearance while directing airflow from the heating/ventilation system into the cabin. 

Fits:
Porsche 911/912 1969 - 1986
Porsche 911 Turbo 1975 - 1977

Diagram ref no 2 (Left) or 3 (Right)

• Position: Right-hand /  Left-hand  side dashboard heating/defroster vent trim, beneath the windscreen

• Typical Use: Replacement during interior restoration, dash refurbishing, or when original vent trim is cracked, broken or missing

The original dashboard vent trims are often made from materials that become brittle over time. They can crack or break easily under stress or vibration - leaving gaps in the ventilation system, reducing cabin airflow, and detracting from the interior’s appearance. A missing or damaged vent trim can also rattle or misalign, compromising both comfort and aesthetics. Installing an replacement restores proper airflow, secures the vent assembly, and brings the interior back to factory-correct condition.

When to replace.  Consider replacing this trim when:
• The existing vent trim is cracked, broken, warped or missing
•  You are restoring or refurbishing the interior of a vintage 911, 912 or 930
•  You notice impaired airflow or vent misalignment from the dashboard vents
•  The dash is being removed or serviced (e.g., re-painting, wiring, HVAC work) and trim pieces have been lost or damaged



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115524

The product you are viewing cross references to these numbers

DASH SUPPORT FRAME RHD factory air vent cut out (with Radio)

Fits 911 1969-73

also used for G model 911's 1974 onwards giving that early 1970's alloy trim effect. Our dashboard trim frames are made from high quality aluminium, extruded and milled to high precision. please note a modification maybe required 

Installation requires no specific tools, "Basketweave" or plain vinyl dashboard facings are not included but can be ordered separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155201030

The product you are viewing cross references to these numbers

Dashboard (Without Speaker Grille) RHD, Black.
The OE Match Dashboard (Without Speaker Grille) RHD, Black is a premium-quality replacement dashboard designed to restore the original appearance, fit and functionality of compatible right-hand drive classic Porsche models. Manufactured to OE specifications for fit, profile and finish, this dashboard faithfully replicates the original factory design and is supplied without the speaker grille, making it suitable for vehicles where the original grille is to be reused or sourced separately.

Fits:

• Porsche 911 1969-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Finished in black, the dashboard is manufactured from high-quality automotive-grade materials with a durable outer surface and reinforced internal structure. Engineered to resist warping, cracking and UV deterioration, it provides long-lasting durability while maintaining the authentic factory appearance. Precision-manufactured for direct OE-style installation, it aligns with the original mounting points, instrument apertures and ventilation openings, making it the ideal choice for restoration projects, accident repairs or replacing worn or damaged original dashboards.  

What This Product Does:

• Restores the original appearance of the vehicle's interior.
• Provides a secure mounting platform for instruments and dashboard controls.
• Supports correct installation of switches, vents and gauges.
• Maintains the factory layout of the dashboard assembly.
• Enhances the appearance and value of the vehicle.
• Replaces cracked, warped or damaged original dashboards.
• Provides direct OE-style fitment on right-hand drive vehicles.
• Forms an essential part of the vehicle's interior trim and cockpit assembly.

Symptoms Of Wear Or Failure:

• Cracked or split dashboard surface.
• Warping or distortion caused by heat and UV exposure.
• Faded or discoloured finish.
• Loose or poorly fitting dashboard panels.
• Damaged mounting points or fixings.
• Rattling noises from the dashboard.
• Lifting or peeling dashboard covering.
• Poor fit around instruments and ventilation components.
• Cosmetic deterioration affecting the interior.
• Reduced originality during restoration.

Why Replacement Matters:

• The dashboard is continually exposed to sunlight, heat, temperature fluctuations and everyday use. Over time, these conditions can cause the materials to crack, warp, fade or deteriorate, reducing both the appearance and structural integrity of the interior.
• A damaged dashboard not only detracts from the presentation and value of a classic Porsche but can also affect the secure mounting of instruments, switches and ventilation components. Warped dashboards may produce rattles, poor panel alignment and an overall unfinished appearance.
• Replacing a worn or damaged dashboard restores the original factory appearance, fit and functionality of the cockpit. The OE Match replacement provides factory-style fitment, premium-quality construction and long-lasting durability, making it the ideal solution for Porsche restoration, refurbishment and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155290600

The product you are viewing cross references to these numbers

Dashboard lower face panel.



Fits:
Porsche 911 / 930 1977-85

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150202234GRV

The product you are viewing cross references to these numbers

Knee Protection Strips.

The OE Match Knee Protection Strips are premium-quality replacement interior trim components designed to restore the original appearance, comfort and protection of the lower dashboard on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and finish, these knee protection strips provide a factory-correct finish while helping to cushion the lower dashboard area and complete the vehicle's interior.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Diagram Ref No 20 (Left) / 21 (Right)

Manufactured from high-quality automotive-grade materials with a durable outer finish and resilient inner construction, the knee protection strips are engineered to resist UV exposure, wear, temperature fluctuations and everyday use. Precision-manufactured for direct OE-style installation, they fit seamlessly into the original dashboard assembly, making them ideal for restoration projects or replacing worn, damaged or missing original trim pieces.  

What This Product Does:

• Provides cushioning along the lower dashboard edge.
• Helps protect occupants from contact with hard dashboard surfaces.
• Restores the original appearance of the dashboard trim.
• Completes the factory interior finish.
• Conceals mounting points and lower dashboard edges.
• Reduces rattles caused by worn or damaged trim.
• Provides factory-style fitment and finish.
• Forms an essential part of the vehicle's interior trim system.

Symptoms Of Wear Or Failure:

• Cracked, split or damaged trim.
• Faded or discoloured finish.
• Loose or detached strips.
• Warped or distorted trim.
• Torn or deteriorated covering material.
• Missing mounting clips or fixings.
• Rattling noises from beneath the dashboard.
• Exposed dashboard edges or framework.
• Cosmetic deterioration affecting the interior.
• Reduced originality during restoration.

Why Replacement Matters:

• Knee protection strips are exposed to continual heat, sunlight, vibration and regular contact from vehicle occupants. Over time, the materials can harden, fade, crack or become detached, reducing both their protective function and the appearance of the vehicle's interior.
• Damaged or missing knee protection strips can expose hard dashboard edges, create unwanted rattles and detract from the authentic finish of a classic Porsche interior. Worn trim can also diminish the value and presentation of a restored vehicle.
• Replacing worn or damaged knee protection strips restores the original appearance, comfort and protection of the lower dashboard. The OE Match replacements provide factory-style fitment, premium-quality materials and long-lasting durability, making them the ideal solution for Porsche restoration, refurbishment and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155203

The product you are viewing cross references to these numbers

Knee Protectors Lower Dashboard. 

(3 parts kit includes left and right knee protectors and astray protection)
The OE Match Knee Protectors Lower Dashboard are premium-quality replacement interior trim components designed to restore the original appearance, comfort and safety of the lower dashboard on compatible classic Porsche models. Manufactured to OE specifications for fit, profile and finish, these knee protectors provide a factory-correct installation while protecting occupants from contact with the lower dashboard structure during everyday driving.  

Fits:

• Porsche 911 1969-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1985 3.2L
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1985 3.3L Turbo (930)  

Manufactured using high-quality automotive-grade materials with a durable outer covering and energy-absorbing inner construction, the knee protectors are engineered to withstand daily use, UV exposure and temperature fluctuations without warping or deteriorating. Precision-manufactured for direct OE-style installation, they integrate seamlessly with the original dashboard and interior trim, making them ideal for restoration projects or replacing worn, damaged or missing original components.  

What This Product Does:

• Protects occupants from contact with the lower dashboard.
• Restores the original appearance of the dashboard interior.
• Provides a cushioned surface beneath the dashboard.
• Enhances interior comfort and safety.
• Completes the factory appearance of the cabin.
• Conceals lower dashboard framework and components.
• Provides factory-style fitment and finish.
• Forms an essential part of the vehicle's interior trim system.

Symptoms Of Wear Or Failure:

• Cracked, split or damaged trim.
• Faded or discoloured surface finish.
• Loose or poorly fitting dashboard panels.
• Warped or distorted protector.
• Torn covering or deteriorated padding.
• Missing mounting points or fixings.
• Rattling noises from beneath the dashboard.
• Cosmetic deterioration affecting the interior.
• Exposed lower dashboard framework.
• Reduced originality during restoration.

Why Replacement Matters:

• The lower dashboard knee protectors are continually exposed to sunlight, heat, vibration and regular contact from vehicle occupants. Over time, the materials can fade, crack, warp or become loose, reducing both their protective function and the appearance of the vehicle's interior.
• Damaged or deteriorated knee protectors can expose underlying dashboard components, create unwanted rattles and detract from the authentic appearance of a classic Porsche. In addition, worn padding provides less protection against accidental contact with the lower dashboard.
• Replacing worn or damaged knee protectors restores the factory appearance, comfort and protection of the interior. The OE Match replacement provides OE-style fitment, premium-quality materials and long-lasting durability, making it the ideal solution for Porsche restoration, refurbishment and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155203000

The product you are viewing cross references to these numbers

Luggage compartment dash cover
Replacement card board type cover with fixing points
This OE Match luggage compartment dash cover is a direct replacement for the original Porsche front trunk trim panel fitted to 911 models from August 1968 through July 1975. Manufactured to factory specifications, it replicates the original cardboard-backed trim panel with integrated fixing points, ensuring correct fitment and authentic appearance.

Fits:
Porsche 911 08/1968 - 07/1975
LHD or RHD cars

Section of diagram ref no 32

Installed inside the front luggage compartment (front boot area), the panel covers the front bulkhead and heater/ventilation components, creating a clean and finished appearance while helping protect internal systems from debris and accidental contact. It also contributes to the original interior presentation of the luggage compartment.

Designed for both left-hand drive (LHD) and right-hand drive (RHD) vehicles, the panel is precision-cut to OE dimensions for straightforward installation using factory mounting points.

This component is ideal for restoration, refurbishment, or replacement of warped, damaged, or deteriorated original trunk trim panels in classic Porsche 911 models.

The luggage compartment dash cover conceals and protects the front bulkhead, ventilation, and heating components inside the front trunk area. It improves the appearance of the luggage compartment while helping shield internal systems from dirt and damage.

Function
•  Covers front luggage compartment bulkhead area
•  Protects ventilation and heating system components
•  Restores factory-correct trunk appearance
•  Helps reduce exposure to dirt and debris
•  Provides clean and finished interior presentation

Original luggage compartment trim panels often deteriorate with age due to moisture, heat, and repeated handling. Warped or damaged panels can leave internal components exposed and reduce the overall appearance of the trunk area. Replacing the panel restores the original factory look and helps maintain a clean, protected luggage compartment.

When to replace
• Original panel is warped, damaged, or missing
• Visible deterioration from moisture or age
• Loose or broken mounting points
• During front trunk restoration or refurbishment
• To restore original factory appearance

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106704

The product you are viewing cross references to these numbers

Luggage compartment dash cover.
Replacement card board type cover with fixing points. Mounted on the bulkhead behind the luggage/trunk area or front compartment, depending on body version.

Fits:
Porsche 911 1976 - 1977 Carrera 3.0
Porsche 911 1978 - 1989

Diagram ref no 7

This cover conceals and protects the bulkhead area of the luggage compartment, providing a clean trimming surface and helping to reduce noise, vibration or thermal transfer from adjacent structure. It restores the OEM interior finish behind the luggage area and supports mounting points for side panels or carpeted trims.

Original covers often suffer from wear, warping, sagging or damage due to age, exposure to heat, moisture or luggage loads. A compromised cover may detach, rattle, or deteriorate the appearance of the boot/trunk area. Installing a quality replacement restores correct fit, improves aesthetics and region-specific mounting integrity.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155106705

The product you are viewing cross references to these numbers