Wing to Panel Seals

Fuel cap holder wing protector. 

Fits:
Porsche 911 / 912 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

The all-new Fuel Cap Holder and Fender Protector offers a convenient solution for storing your fuel cap whilst refueling.
Designed specifically to fit the filler neck of your 911 or 912, this fuel cap holder stores your cap while protecting your fender and paint. When refueling is complete, the Fuel Cap Holder folds away for maximum convenience. Made of petroleum resistant Nitrile rubber, this simple accessory will provide long lasting protection and convenience every time you fuel up.

Diagram Ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120127902

The product you are viewing cross references to these numbers

Rear 1/4 Panel To Body Seal.

The OE MATCH Rear 1/4 Panel to Body Seal is a high-quality replacement rubber seal designed to fit between the rear quarter panel trim and adjoining bodywork on classic Porsche models. Manufactured to OE specifications, this seal provides a neat, factory-correct finish while helping to prevent the ingress of water, dirt, dust, and road contaminants into vulnerable body panel gaps.

Fits:

• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)

Constructed from durable automotive-grade rubber, the seal is engineered to withstand prolonged exposure to UV rays, moisture, temperature changes, and environmental conditions. It is an essential component for restoration projects or when replacing aged, cracked, or deteriorated original seals to maintain both appearance and body protection.

What This Product Does:

• Seals the gap between the rear quarter panel and bodywork
• Helps prevent water, dirt, and debris ingress
• Provides a clean, factory-original appearance
• Reduces unwanted panel gaps and trim inconsistencies
• Protects bodywork from moisture-related corrosion risks
• Supports accurate restoration of classic Porsche models

Symptoms Of Wear Or Failure:

• Cracked, split, or perished rubber material
• Shrinkage, warping, or distortion of the seal
• Visible gaps between trim panels and bodywork
• Water ingress into body cavities or panel areas
• Accumulation of dirt and debris behind trim sections
• Loose or detached sections of seal
• Fading, hardening, or loss of flexibility
• Deteriorated exterior trim appearance

Why Replacement Matters:

• Restores a weather-resistant seal between body panels
• Helps prevent moisture ingress and corrosion formation
• Maintains factory-correct panel fitment and appearance
• Improves the overall finish of the vehicle's exterior
• Supports concours-quality restorations and refurbishment projects
• Protects body cavities from dirt and environmental contaminants
• Enhances vehicle presentation and long-term value
• Provides durable OE-quality fit, finish, and reliability

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050319700

The product you are viewing cross references to these numbers

Rear 1/4 panel to bumper & body seal. RSR (38" Long) Porsche 911

Fits:
Porsche 911 Converted to wide body RSR / ST
or back dated to wide body RSR / ST look

Diagram Ref 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150509

The product you are viewing cross references to these numbers

Rubber Seal Set. Porsche 911 TURBO 1977-79

Fits:
Porsche 911 TURBO 1977-89

Contains:
2x 93050319700 Rear 1/4 Panel to Body Seal
2x 91150332500 Front Bumper Bottom Seal
2x 91150332600 Front Bumper Upper Seal
2x 90150339422 Front Windscreen Scuttle Seal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG50339400

The product you are viewing cross references to these numbers

Scuttle panel rubber 4.3mm.

Fits:
Porsche 911 1965-89
Porsche 964 1989-94

Diagram Ref: 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150339422

The product you are viewing cross references to these numbers

Scuttle panel rubber 4.3mm,  is a high-quality replacement designed to fit between the fender and scuttle/cowl panel on classic Porsche 911 and 912 models. The seal provides a tight barrier against water, dust, and wind, ensuring proper protection for the bodywork and interior.

Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994

Diagram ref no. 5

Function:
•  Seals the gap between the fender and scuttle/cowl
•  Prevents water ingress and debris build-up
•  Reduces wind noise and panel vibration
•  Helps preserve the structural integrity and appearance of the vehicle

Over time, rubber seals can harden, shrink, or crack. Replacement is recommended if you notice:
•  Water leaks into the cabin or luggage compartment
•  Increased wind noise from the front fender area
•  Visible wear, cracks, or loose fit of the seal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150339422

The product you are viewing cross references to these numbers

Wing petrol flap rubber.

Fits:
Porsche 356 B / C
Porsche 911 1965-89

Diagram Ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120127902

The product you are viewing cross references to these numbers

Wing Petrol Flap Rubber.

The OE MATCH Wing Petrol Flap Rubber is an OE-matching sealing component designed to fit around the fuel filler flap area of classic Porsche models. This rubber seal provides a protective barrier between the fuel flap assembly and surrounding bodywork, helping to prevent the ingress of water, dirt, dust, and road debris into the fuel filler recess.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 17

This OE MATCH petrol flap rubber is engineered to match the fit, appearance, and function of the original component. Constructed from durable, weather-resistant rubber, it helps maintain a clean fuel filler area while protecting painted surfaces and surrounding components from contamination and premature wear.

What This Product Does:

• Seals the fuel filler flap area against moisture and debris
• Helps prevent water ingress into the fuel filler recess
• Protects surrounding bodywork and paintwork
• Reduces the accumulation of dirt and road contaminants
• Maintains the original fit and appearance of the fuel flap assembly
• Supports long-term preservation of body and fuel filler components

Symptoms Of Wear Or Failure:

• Cracked, split, or hardened rubber
• Perished or brittle seal material
• Water entering the fuel filler recess
• Loose or poorly fitting seal
• Visible shrinkage or deformation
• Increased dirt and debris accumulation around the filler area
• Deterioration affecting the appearance of the fuel flap surround

Why Replacement Matters:

• Restores effective sealing against water and contaminants
• Protects fuel filler components from corrosion and dirt build-up
• Maintains the appearance of the fuel flap and surrounding bodywork
• Prevents moisture-related damage in the filler recess
• Improves fitment and overall vehicle presentation
• Supports restoration and preservation of classic Porsche models
• Provides OE-style appearance and functionality
• Helps maintain long-term bodywork and fuel system condition

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120127902

The product you are viewing cross references to these numbers