do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Drop Links & Bushes FRONT
Restore solid front-end handling on your Porsche 944 (1985-91) or 968 (1992-95) with this front drop-link kit. Includes the drop-link and new mounting bushes, designed to connect the front anti-roll bar to your suspension arms with minimal play. If your car exhibits front-end clunks, increased body roll in corners or worn suspension links, this direct-fit replacement ensures the stabiliser bar functions as intended—improving turn-in, chassis balance & everyday driving sharpness.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
What This Product Does:
- The front anti-roll bar (sway bar) is a component that helps to reduce body roll during cornering by transferring load from one side of the suspension to the other.
- The drop link is the vertical or angled link that connects the bar to the suspension arm or mount. If the drop link or its bushes are worn, the sway bar cannot effectively transmit load, reducing the stabiliser effect.
- With healthy drop links and bushes, you maintain good front-end stability, sharper turn-in, better chassis balance and even tyre loading.
Symptoms Of Wear Or When To Replace:
- Clunking / knocking noise from the front suspension when going over bumps or steering sharply — often due to worn drop links or degraded bushes.
- Excessive body roll or vague front end response in corners — if the link is soft or broken, the anti-roll bar may be less effective.
- Uneven front tyre wear or misalignment issues — worn links permit more movement, shifting geometry under load.
- Visual wear: the drop link appears bent, its mounting bush is cracked or the assembly moves excessively by hand.
- Replacing worn drop links restores the anti-roll bar’s ability to function correctly — improving handling precision, reducing body roll and stabilising chassis behaviour.
- It helps the rest of your suspension work properly: if springs, dampers or tyres have been upgraded but the links are worn, the gains may not be fully realised.
- From a maintenance and value perspective: worn links and bushes can lead to additional stresses (on arms, bushes, mounts) and knock-on wear. Replacing this part is preventative.
- For driving enjoyment: when the link + bushings are sound, the car feels tighter, more responsive and more confident — especially during dynamic driving or spirited use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134307500
The product you are viewing cross references to these numbers
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
This OE Match front anti-roll bar / sway bar drop link is a replacement front suspension link for Porsche 944 Turbo, 944 S2, and 968 models. It includes the required bushes and is available in two versions: a Sport / Racing replacement with stiffer rubber for fast road and track use, and a Stock replacement street version for standard road comfort and OE-style suspension feel. Fits - Left or Right side.
This part is sold individually, and 2 are required per car.
Fits:
Porsche 944 Turbo / S2
Porsche 968
Diagram ref no 5, 6, 7, 8, 10
The front drop link connects the front anti-roll bar / sway bar to the suspension assembly. It transfers suspension movement to the anti-roll bar, helping reduce body roll during cornering and supporting stable handling. The included bushes help isolate vibration while allowing the link to operate correctly through suspension movement.
Available Options
• Sport / Racing replacement – stiffer rubber version for fast road and track use
• Stock replacement – street version for standard road driving and OE-style comfort
Functions
• Connects the front anti-roll bar / sway bar to the suspension
• Helps reduce body roll during cornering
• Supports front-end stability and handling control
• Includes bushes for correct installation and movement isolation
• Helps restore anti-roll bar function and steering response
• Replaces worn, loose, corroded, bent, or damaged original drop links
• OE Match replacement for suspension repair, upgrade, or restoration.
Why Replace This Part?
Front drop links and bushes are exposed to road dirt, water, suspension load, corrosion, and constant movement. Over time, the link or bushes can wear, loosen, crack, perish, or become noisy. A worn drop link may cause knocking, rattling, vague steering, increased body roll, poor front-end response, or failed inspection. Replacing the drop link helps restore correct anti-roll bar operation and improves suspension control.
When to Replace This Part
• Knocking, rattling, or clunking is heard from the front suspension
• The drop link bushes are cracked, worn, loose, or perished
• The link is bent, rusty, seized, or damaged
• Front-end handling feels vague or unstable
• Body roll feels excessive during cornering
• The anti-roll bar or front suspension is being serviced
• The vehicle has failed inspection due to suspension wear
Where it fits on the car
This drop link fits on the front anti-roll bar / sway bar assembly. It connects the front anti-roll bar to the suspension linkage according to the factory suspension layout.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134307500
The product you are viewing cross references to these numbers
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Two sizes covering anti roll bars:
95134379330 = PFF57-206 20mm - 24mm
95134379300 = PFF57-205-16 25.5mm - 26.8mm
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Fits:
Porsche 944 1986-91
Porsche 968 1992-95
Diagram Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-20
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Size: Fits Anti roll bars of 25.5 - 26.8mm
Fits:
Porsche 944 1987-91 Turbo Front
Porsche 944 Turbo S 1988 Front
Porsche 968 1992-95 Front Cars with standard suspension
Please note price shown is for quantity 1.
Please note there is 2 bushes per car.
Click 'Zoom in' to display fitment diagram - Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134379330
The product you are viewing cross references to these numbers
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Sold each - 2 required per car
Restore the precision and responsiveness of your Porsche
suspension with this OE Match Anti Roll Bar to Drop Link Bush for the Porsche
944 turbo and Porsche 968 fitted with standard suspension. This small but vital
suspension component sits between the anti roll bar and drop link assembly,
helping to transfer suspension loads while isolating unwanted vibration and
noise.
Fits:
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
Diagram ref no 17
Designed to OE specifications, this replacement bush restores the correct operation of the anti roll bar system, helping to maintain chassis stability, reduce body roll and preserve the sharp handling characteristics for which the transaxle Porsche models are renowned.
Whether you're carrying out routine suspension maintenance, addressing suspension noises or undertaking a full chassis restoration, replacing worn anti roll bar bushes is an important step in restoring factory handling performance.
What Does the Anti Roll Bar to Drop Link Bush Do?
The anti roll bar bush forms a flexible connection between the anti roll bar and drop link assembly.
Its primary functions include:
- Transferring suspension forces efficiently
- Supporting anti roll bar operation
- Reducing body roll during cornering
- Absorbing vibration and road shock
- Maintaining suspension geometry
- Improving vehicle stability
- Reducing suspension noise
Without properly functioning bushes, the anti roll bar system cannot operate effectively, reducing both handling performance and driver confidence.
Why Do Anti Roll Bar Bushes Fail?
Suspension bushes are constantly subjected to movement, vibration and environmental exposure.
Common causes of failure include:
- Rubber deterioration
- Age-related hardening
- Exposure to oil and contaminants
- Road salt and moisture
- Repeated suspension loading
- Heat cycling
- High mileage wear
- Cracking and perishing
Over time, the rubber loses its elasticity, allowing excessive movement within the suspension assembly.
Symptoms of Worn Anti Roll Bar Bushes
Common warning signs include:
- Knocking noises from the suspension
- Clunking over bumps
- Increased body roll
- Reduced handling precision
- Suspension looseness
- Uneven vehicle behaviour
- Excessive movement in the anti roll bar assembly
- MOT or inspection advisories
These symptoms are often most noticeable during cornering or when driving over uneven road surfaces.
When Should Anti Roll Bar Bushes Be Replaced?
Replacement is recommended when:
- Cracks or splits are visible
- The rubber has hardened or deteriorated
- Suspension noises develop
- Excessive movement is present
- Carrying out suspension refurbishment
- Restoring a Porsche 944 turbo or 968
- During preventative maintenance
- Anti roll bar components are being replaced
Many Porsche specialists recommend inspecting anti roll bar bushes whenever suspension work is undertaken.
Why Replacement Matters
A worn anti roll bar bush can significantly affect handling and suspension performance.
Benefits of replacement include:
- Improved cornering stability
- Reduced body roll
- Better steering response
- Reduced suspension noise
- Improved chassis control
- Enhanced driving confidence
- Restored suspension performance
- Longer component life
Replacing worn bushes helps maintain the precise handling balance Porsche engineered into the 944 Turbo and 968 chassis.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134379330
The product you are viewing cross references to these numbers
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 944 1985-91 ALL Front
Porsche 968 1992-95 ALL Front
Please note price shown is for quantity 1.
Please note there is 4 bushes per car.
Click 'Zoom in' to display fitment diagram - Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134379501
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 944 1985-91 ALL Front
Porsche 968 1992-95 ALL Front
Please note price shown is for quantity 1.
Please note there is 4 bushes per car.
Click 'Zoom in' to display fitment diagram - Ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134379501
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits - Left and Right.
Fits:
Porsche 944 1985-91
Porsche 968 1992-95
Diagram ref no 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134307500
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits - Left and Right.
Fits:
Porsche 944 1985-91
Porsche 968 1992-95
Diagram ref no 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95134307500
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 944 1985-91 with Alloy Wishbones
Porsche 944 1983-85 with steel Wishbones
Upgrade your stock or M030 front swaybar with this simple bolt in mounting brace.
Reinforces the weak factory swaybar mounting bracket by triangulating it to the front cross member.
Prevents flexing that can lead to fatigue failure of the factory bracket. Improve swaybar response by stiffening up its flexible mounting bracket.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1140
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche Front Anti-Roll Bar Drop Links & Bushes | Design911 Suspension Components for Precision Handling & Stability
Front anti-roll bar drop links and bushes play a critical role in connecting your Porsche’s suspension system to the anti-roll bar, ensuring stability, grip, and control during cornering. They help transfer forces evenly between both sides of the suspension, reducing body roll and maintaining a flat, stable stance. When in good condition, these components enhance steering precision and give your Porsche the balanced, responsive handling it’s renowned for.
At Design911, we stock a wide selection of front anti-roll bar drop links and bushes, engineered for strength, durability, and accuracy. Manufactured from high-quality steel, alloy, or polyurethane materials, these components are designed to withstand the high cornering forces and performance demands typical of Porsche vehicles. Ideal for suspension servicing, upgrades, or restorations, our range ensures superior road feedback, improved stability, and long-term reliability.
What Do Front Anti-Roll Bar Drop Links & Bushes Do?
These suspension components connect the anti-roll bar to the control arms and chassis, allowing the suspension to move freely while controlling body roll.
Core Functions:
• Transfer suspension load from the wheels to the anti-roll bar.
• Reduce chassis roll for flatter, more stable cornering.
• Maintain consistent tyre contact and traction.
• Enhance steering response and driver confidence.
• Minimise noise, vibration, and harshness from suspension movement.
High-quality drop links and bushes ensure predictable handling, making them essential for both spirited driving and everyday comfort.
Why Do Front Anti-Roll Bar Drop Links & Bushes Fail or Degrade?
Drop links and bushes are constantly exposed to movement, pressure, and environmental factors, which cause gradual wear and performance loss over time.
Common Causes of Failure Include:
• Worn or split rubber bushes leading to excess movement.
• Corrosion or fatigue in metal link rods.
• Perished rubber or degraded polyurethane mounts.
• Loose fittings causing knocking or vibration.
• Exposure to heat, moisture, and debris accelerating wear.
When these parts deteriorate, handling can feel vague, unstable, or noisy — reducing both comfort and driver control.
Why Replace or Upgrade Your Porsche Front Anti-Roll Bar Drop Links & Bushes?
Replacing worn components restores steering precision, stability, and overall driving confidence. Upgrading to performance-spec materials, such as polyurethane or reinforced links, further enhances responsiveness and durability.
Key Benefits:
• Restores handling balance and steering accuracy.
• Reduces body roll and suspension noise.
• Improves road grip and chassis feedback.
• Available in standard and performance-grade designs.
• Fits Porsche 911, 944, 968, Boxster, Cayman, Cayenne, and Macan models.
• Ideal for restorations, servicing, or performance suspension upgrades.
Design911’s Porsche front anti-roll bar drop links and
bushes provide the precision, strength, and reliability needed to keep your
Porsche’s handling sharp and responsive under all conditions.
Highlights
• Premium Porsche front anti-roll bar links and bushes.
• Precision-engineered for superior fitment and handling.
• Reduces vibration, noise, and suspension flex.
• Corrosion-resistant and high-performance materials.
• Compatible with both classic and modern Porsche models.
• Perfect for servicing, performance tuning, or restoration work.
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Ball Joints
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Shock Absorber Parts REAR
-
Coil Springs FRONT
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Wheel Bearings & Kits
-
Hub Nut
-
Wishbones & bushes
-
Torsion Bar
-
Spring Plate
-
Rear Trailing Arm
-
Cross Member & Parts
-
Wheel Hub / Carrier
-
SuperPro Polyurethane Bushes
-
Powerflex Heritage Collection
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed