do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Wiper Motor
Fits:
Porsche 924 /S (1976 to 1988)
Porsche 944 (1982 to 1985)
Porsche 944/2 (1985 to 1991) with VIN F 94KN403599<< F 95KN101261>>
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9446280710203C
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Porsche ref no 477845333
For cars with 27mm hole in the screen. If your car has 17mm hole please see part 7313.
Fits:
944 S2 Turbo (1989-)
968 all
This blind plug when disassembling the rear wiper for clean and visually inconspicuous sealing the hole in the rear window.
A nice side effect:
The reduced weight due to the dismantling of the wiper motor ensures the automatic opening of the tailgate even when unlocked.
Production:
The cap is made of black matt-coated aluminum and is sealed on both sides with rubber pads.
Click 'Zoom in' for large parts diagram.
Diagram ref no 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4001
The product you are viewing cross references to these numbers
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Rubber Grommet 8x14x7
Sold each - 2 required per car
Restore the correct mounting and protection of your Porsche components with this Rubber Grommet (8x14x7), designed for selected Porsche 924, 944 and 968 models. Manufactured to original equipment specifications, this versatile rubber grommet is used in multiple factory applications, including mounting the rear wiper motor carrier plate on the Porsche 924, 944 and 968.
Although small and inexpensive, this rubber grommet plays an important role in reducing vibration, preventing wear and ensuring the secure routing or mounting of key components.
What Does the Rubber Grommet Do?
This OE Match rubber grommet provides cushioning, support and protection between components and the vehicle body.
Its functions vary depending on the application:
On Porsche 924 / 944 / 968:
- Supports the rear wiper motor carrier plate.
- Absorbs vibration from the rear wiper motor.
- Reduces noise transmitted into the bodywork.
- Maintains correct alignment of the rear wiper assembly.
Why Do Rubber Grommets Fail?
Rubber mounting components naturally deteriorate with age and environmental exposure. Common causes of failure include:
- Heat and age causing the rubber to harden.
- Cracking and splitting.
- Compression reducing elasticity.
- UV exposure where applicable.
- Oil, grease or chemical contamination.
- General wear after decades of service.
As the rubber deteriorates, it loses its flexibility and vibration-damping properties, allowing excessive movement, noise or wear to develop.
When Should the Rubber Grommet Be Replaced?
Replacement is recommended whenever the related component is removed or serviced, or if any of the following are found:
- Cracked or perished rubber.
- Loose mounting points.
- Flattened or compressed grommets.
- Increased vibration or rattling.
- Damaged fuel flap release cable support.
- During restoration or preventative maintenance.
Replacing ageing rubber grommets is an inexpensive way to restore factory fitment and protect surrounding components from unnecessary wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970218040
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Rubber Grommet 8x14x7
Sold each - 2 required per car
Restore the correct mounting and protection of your Porsche components with this OE Match Rubber Grommet (8x14x7), designed for selected Porsche 924, 944 and 968 models. Manufactured to original equipment specifications, this versatile rubber grommet is used in multiple factory applications, including mounting the rear wiper motor carrier plate on the Porsche 924, 944 and 968.
Although small and inexpensive, this rubber grommet plays an important role in reducing vibration, preventing wear and ensuring the secure routing or mounting of key components.
What Does the Rubber Grommet Do?
This OE Match rubber grommet provides cushioning, support and protection between components and the vehicle body.
Its functions vary depending on the application:
On Porsche 924 / 944 / 968:
- Supports the rear wiper motor carrier plate.
- Absorbs vibration from the rear wiper motor.
- Reduces noise transmitted into the bodywork.
- Maintains correct alignment of the rear wiper assembly.
Why Do Rubber Grommets Fail?
Rubber mounting components naturally deteriorate with age and environmental exposure. Common causes of failure include:
- Heat and age causing the rubber to harden.
- Cracking and splitting.
- Compression reducing elasticity.
- UV exposure where applicable.
- Oil, grease or chemical contamination.
- General wear after decades of service.
As the rubber deteriorates, it loses its flexibility and vibration-damping properties, allowing excessive movement, noise or wear to develop.
When Should the Rubber Grommet Be Replaced?
Replacement is recommended whenever the related component is removed or serviced, or if any of the following are found:
- Cracked or perished rubber.
- Loose mounting points.
- Flattened or compressed grommets.
- Increased vibration or rattling.
- Damaged fuel flap release cable support.
- During restoration or preventative maintenance.
Replacing ageing rubber grommets is an inexpensive way to restore factory fitment and protect surrounding components from unnecessary wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970218040
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 944 1985-91
Porsche 968 1994>> LHD Cars
Click 'Zoom in' for large parts diagram.
Diagram ref no 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9446281010201C
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits
Porsche 944/2 (1989 to 1991)
with VIN F 94KN403599<< F 95KN101261>>
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94462803002
The product you are viewing cross references to these numbers
- Porsche 944 2.7L 8V 1988-89
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 944 1985-91 RHD and LHD
Porsche 968 1992-95 RHD and LHD
Porsche 928 1985-95 LHD only
Porsche 964 1989-94 RHD only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94462830301
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Shop Securely
12 Month Warranty
Worldwide Delivery
Wiper motors are vital components that keep your Porsche’s windscreen clear, providing safe visibility in rain, snow, or dirt conditions. Mounted beneath the windscreen cowl, the wiper motor powers the wiper linkage, converting electrical energy into the precise mechanical movement that sweeps the blades across the glass.
At Design911, we stock a comprehensive range of genuine and aftermarket wiper motors for classic and modern Porsche models - including the 911, Boxster, Cayman, Cayenne, Macan, and Panamera. Every motor is designed for an exact fit and consistent, long-lasting performance.
What Do Wiper Motors Do?
The wiper motor is an electric drive unit that operates the
windscreen wipers at variable speeds. When you activate the wiper switch, the
motor’s internal gearing and armature generate rotary motion, transferring it
through linkages to move the wiper arms.
A quality wiper motor ensures:
- Smooth, even wiping across the windscreen.
- Reliable performance in all weather conditions.
- Integration with intermittent, low, and high-speed modes.
Why Do Wiper Motors Fail?
Over time, wiper motors can wear or fail due to a
combination of mechanical and electrical issues, including:
Symptoms of a failing wiper motor include slow or uneven wiper movement, wipers stopping mid-sweep, or complete non-operation.
Why Replace Faulty Wiper Motors?
A defective wiper motor can severely compromise visibility
and driving safety. Replacing it ensures your windscreen remains clear in all
weather, maintaining safety, comfort, and MOT compliance.
By choosing a genuine Porsche wiper motor, you retain OEM build quality and longevity. For cost-effective repairs, aftermarket alternatives from trusted brands offer excellent performance and compatibility without compromise.
Design911 supplies both genuine Porsche and premium aftermarket wiper motors — all rigorously tested for reliability, precise fitment, and long service life.
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed