Badges & Emblems

"Club Sport" Side Decal.
PAIR



3 colours: BLACK, RED, SILVER

Fits:
Porsche 968 1992-95


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9999995450

The product you are viewing cross references to these numbers

1 2 3 4 5 6 7 8 9 0 - Chrome Numbers

Buy any Letters or Numbers to make up your own logo or name..... it's upto you !
Individual letters which can be spaced as required. each letter or number is about 19mm in height

Examples:
JANE - HARRY 911 - TURBO 930 - FASTER THAN U - LOWERED - 911 - 924 - 997 - RACER - MUMS CAR

Bonnet badge replacement rubber gasket



Fits:
All Porsche bonnet badges (except 356 type)
Bonnet badge not included. Available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7L5853611B

The product you are viewing cross references to these numbers

Bonnet badge replacement rubber gasket.
This gasket sits between the badge and the bonnet surface, ensuring a snug fit, helping protect the paint beneath the badge from moisture, and enhancing proper badge alignment and appearance.

Fits:
All Porsche bonnet badges (except 356 type)
*** Bonnet badge not included. Available separately.


• Position on Vehicle: Under the bonnet/hood badge - the gasket component between the badge (crest emblem) and the bonnet skin surface.

•  Function: Provides a cushioned, moisture-resistant interface for the badge; prevents paint damage, seal degradation, badge wobble and water ingress under the emblem; maintains correct spacing and alignment of the badge in the vicinity of bonnet surface.

Although small and often overlooked, the badge backing gasket plays an important role in the appearance and longevity of your vehicle’s front emblem. If it fails or goes missing, you may experience:
• Uneven badge fitment, bulging, or misalignment
• Corrosion or paint damage beneath the badge due to trapped moisture
• Audible rattles or wear around the badge area
• Compromised original-finish appearance and diminished restoration integrity.

Replacing this gasket restores alignment, improves fit and finish, protects underlying paint and ensures full restoration authenticity.

When to replace:
• The existing gasket is cracked, hardened, flattened or missing
• You’re replacing the bonnet badge or have removed it for paint-work or restoration
• Badge fitment appears uneven or “loose”
• Preparation for resale, show or restoration and you want every detail correct

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7L5853611B

The product you are viewing cross references to these numbers

Bonnet Badge for Early Porsche 911's Upto 1973

Retro bonnet badge with Orange detailing

Fits:
Porsche 911 F models upto 1973
Porsche 911 G model upto 1974

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155921029

The product you are viewing cross references to these numbers

Bonnet Badge Grommet.
The Porsche Bonnet Badge Grommet is a genuine OEM retainer designed to securely hold the Porsche bonnet crest in place. These small but essential plastic grommets fit into the bonnet mounting holes and lock the badge pins, preventing vibration, loosening, or badge loss.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988>>
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94

What This Product Does:
The badge on the bonnet is mounted via badge posts/pins, and these small plastic grommets (catch / retainer) insert into holes on the bonnet/hood. The badge pins go through them, and the grommets retain/lock them in place, preventing badge from rattling or coming loose.

Common Symptoms if It’s Damaged / Worn / Missing:

• The bonnet badge is loose or appears to move or wiggle, especially when closing bonnet or driving over bumps.
• Badge is rattling or vibrating inside the badge housing.
• Badge is missing entirely (if grommets broke or came out).
• The badge sits unevenly or one side is lower than the other because one retainer is missing or damaged.
• Badge comes off easily when washing car or under light force.

Why Replacement Matters:

• Keeps your badge securely mounted — prevents badge falling off or being lost, which can look sloppy or give dirt ingress.
  
• Preserves the factory appearance — badges are a notable styling detail. Missing or misaligned badge detracts from aesthetic and value.
  
• Avoids damage or scratching to paint where a loose badge may move or chafe.
  
• Low-cost repair: replacing small grommets is cheap versus replacing entire badge or bonnet panel if paint gets damaged.

Diagram Ref No 24A

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970217550

The product you are viewing cross references to these numbers

Bonnet Badge Nut / Grommet

Sold in singles

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WHT004974

The product you are viewing cross references to these numbers

Bonnet badge ONLY.

Fits:
Porsche 911 G (1974–1989)
Porsche 924 (1976–1988)
Porsche 928 (1978–1995)
Porsche 944 (1982–1991)
Porsche 959 (1987–1988)
Porsche 964 (1989–1994)
Porsche 968 (1992–1995)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155921028

The product you are viewing cross references to these numbers

Catalytic converter decal for Porsche (USA).

Models:
Porsche 911 Carrera 1984–1989
Porsche 911 (964) 1989–1994
Porsche 911 (993) 1994–1998
Porsche 911 (996) 1999–2005
Porsche 924 1976-1985
Porsche 924S 1986–1988
Porsche 928 1978–1995
Porsche 944 1982–1991
Porsche 968 1992–1995
Porsche 986 Boxster 1994–2004

Details:
Printing on solid foil.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477000267

The product you are viewing cross references to these numbers

“Catalyst” Sticker – Catalytic Converter Decal (Multiple Models)

High-quality reproduction “Catalyst” sticker designed for Porsche models equipped with catalytic converters.

This OEM-style decal identifies vehicles fitted with catalytic converter systems and forms part of the original factory engine bay and emissions labelling.

Models:
Porsche 911 Carrera 1984–1989
Porsche 911 (964) 1989–1994
Porsche 911 (993) 1994–1998
Porsche 911 (996) 1999–2005
Porsche 924 1976-1985
Porsche 924S 1986–1988
Porsche 928 1978–1995
Porsche 944 1982–1991
Porsche 968 1992–1995
Porsche 986 Boxster 1994–2004

Manufactured using durable high-quality film with a reinforced adhesive backing, this sticker is designed to withstand engine bay conditions while maintaining a clean, factory-correct appearance.

A faithful reproduction, this catalyst label is an essential detail for restoration, compliance, and originality.

Key Features

• Accurate reproduction of original “Catalyst” sticker
• Suitable for a wide range of Porsche models
• Designed for engine bay or emissions label placement
• OEM-style appearance for factory-correct restoration
• High-quality film construction for durability
• Reinforced adhesive for long-lasting application

Function and Purpose

This catalyst sticker indicates that the vehicle is equipped with a catalytic converter system.

It helps to:

• Identify emissions-compliant vehicles
• Maintain factory-correct engine bay labelling
• Support restoration accuracy
• Replace worn or missing original decals

Why Replace Your Catalyst Sticker

Original emissions labels often deteriorate over time due to heat and environmental exposure.

Common issues include:

• Fading or discolouration
• Peeling or lifting edges
• Cracking or damage
• Missing or illegible markings

Replacing the sticker restores both compliance visibility and factory appearance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477000267

The product you are viewing cross references to these numbers