Control Arms Front

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180001

The product you are viewing cross references to these numbers

Front adjustable thrust arm bushing kit. 

Fits:
Porsche 981 Boxster / Cayman
Porsche 718 Boxster / Cayman
Porsche 991.1 / 991.2

Features

• Provides two eccentric mounting points
  
• Used to adjust for increasing or decreasing wheelbase, and adjustable caster
• A must-have for extended lower control arms (GT3 control arms or eccentric monoballs) to correct for unintended caster change
  
• Complete set of 2 for front lower control arms

Verify which height you need.
The “Motorsport” kit requires the BBI Thrust Arm Kit. The OE height kit, is plug-and-play with the factory Thrust Arm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BBITHRUSTBUSH918281

The product you are viewing cross references to these numbers

Front adjustable thrust arm kit. 



Fits:

Porsche Boxster 981 2.7L 2012-16

Porsche Boxster S 981 3.4L 2012-16

Porsche Boxster 718 2.0L Manual (300 Bhp)

Porsche Boxster 718 2.0L PDK (300 Bhp)

Porsche Boxster S 718 2.5L Manual (350 Bhp)

Porsche Boxster S 718 2.5L PDK (350 Bhp)

Porsche 991 Carrera C2 3.4L (350Bhp)

Porsche 991 Carrera C2S 3.8L (400Bhp)

Porsche 991 Carrera C4 3.4L (350Bhp)

Porsche 991 Carrera C4S 3.8L (400Bhp)

Porsche 991 Turbo 3.8L (520bhp)

Porsche 991 Turbo S 3.8L (560Bhp)

Porsche 991 GT3 3.8L (475Bhp)

Porsche 991 GT3 RS 4.0L (500Bhp)

Porsche 991 Carrera 2 3.0L (370 Bhp)

Porsche 991 Carrera 2S 3.0L (420 Bhp)

Porsche 991 Carrera 4 3.0L (370 Bhp)

Porsche 991 Carrera 4S 3.0L (420 Bhp)

Porsche 991 Cabriolet 2 3.0L (370 Bhp)

Porsche 991 Cabriolet 2S 3.0L (420 Bhp)

Porsche 991 Cabriolet 4 3.0L (370 Bhp)

Porsche 991 Cabriolet 4S 3.0L (420 Bhp)

Porsche 991 Targa 4 3.0L (370 Bhp)

Porsche 991 Targa 4S 3.0L (420 Bhp)

Porsche 991 Turbo Coupe 3.8L (540 Bhp)

Porsche 991 Turbo S Coupe 3.8L (580 Bhp)

Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)

Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)

Porsche 991 R 4.0L (500 Bhp)

Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

Porsche Cayman 2.7L 981 2013-16

Porsche Cayman S 3.4L 981 2013-16

Porsche Cayman GT4 3.8L 2015-16

Porsche Cayman 718 2.0L Manual (300Bhp)

Porsche Cayman 718 2.0L PDK (300Bhp)

Porsche Cayman S 718 2.5L Manual (350Bhp)

Porsche Cayman S 718 2.5L PDK (350Bhp)

Features

• Connects the Lower Control Arm to the subframe
  
• Provides precision caster adjustability
  
• Spacers included for setting stock or anti-squat and anti-dive configurations
• Direct OE Upgrade
• Each Kit Includes Pair of 2 Links

Please note, for a complete solution add the BBI Solid Front Bushing Kit then opt for the “narrow” fork in the drop down. 
This eliminates the rubber bushing in the control arm. (991.2 GT3 RS and GT2 RS Excluded - select the standard wide fork.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BBITHRUSTF981991

The product you are viewing cross references to these numbers