Performance Friction Brakes

PERFORMANCE FRICTION Fast Road & Race Brake Pads 0991 / E2707
Replacement OE part no  99635194800
Sold as SET OF 4 pads for one axle.

Dimensions: 190 × 17 × 65 mm


Porsche 997 Turbo 09>> Front
Porsche 997 GT3 09>> Front
Porsche 997 GT3 RS 09>> Front
Porsche 997 GT3 CUP 09>> Front

Please note: This brake pad comes with hole for sensor.

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

PFC brake pad compounds:

08 compound
  endurance compound for high temperatures. Slight friction rise with temperature. Low disc wear

08 compound has gained immediate favour in endurance sportscar and GT racing and also in endurance production car racing due to its performance in applications where smooth initial bite is a must. 08 has a slight friction rise with temperature with excellent release and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.
Applications: Endurance pad for high temperature applications, GT, Touring car, Driving school, Trackday, Rally Raid.

13 compound
   high bite, high friction for sprint & rally applications.

13 compound is a new generation of ultimate high bite-high friction. 13 compound has been developed with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. It is the ultimate combination of high bite and infinite control. Ideal use where high bite in the first third of the stop is desired. 13’s wear is on a par with PFC's legendary 01 compound and will operate at higher temperatures if called to. 13 has a very high threshold for fade resistance. Out of all the high bite, high torque pads on the market 13 has shown to have one of the lowest taper wear in a properly designed race caliper.
Applications: GT3, GT4 front, LMP3, Rally, Formula 3, F3R, Indy series, Touring car, one make series

68 compound
    for street & track day use, with incredible cold bite plus high temperature tolerance.

The 68 compound is the most popular street/track day offering in the PFC lineup. This compound has incredible cold bite and even better mu with extreme temperatures. Offering a smooth release and responsive pedal for pushing the limit. 68 is quiet on brake application with very low, non-corrosive dust characteristics.
Whether it’s crossing out items from your grocery list or writing in a new personal best lap time, this pad is the ultimate option for street driving and high-performance track days.

331 compound
    degressive pad for front applications, with good initial bite & low wear. ABS-friendly.

331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs. The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning.
Applications: Endurance pad for front axle with ABS, GT3, GT4, Touring car and Trackday


Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about  Racing Compound Characteristics

Information about  Brake Pad Size

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0991.

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



Dimensions: 373 × 60 × 29 mm

This Product Fits:

Porsche 997 GT2 / GT3 / RS / Turbo 2005>>
Porsche 997 All Gen 2 cars 2011>>

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

373.076.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Dimensions : 380 x 32 mm



This Product Fits:

Porsche 997.1 GT2 (2008 - 2009) - PCCB Rep
Porsche 997.2 GT2 RS (2011 - 2012) - PCCB Repl.
Porsche 997.1 GT3 / GT3 RS (2006 - 2009) - PCCB Repl.
Porsche 997.2 GT3 / GT3 RS / GT3 RS 4.0 (2010 - 2012) - Iron & PCCB Repl.
Porsche 997 GT3 Cup - with shape pad 0991
Centre-lock and 5-stud compatible


Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

379.067.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



Disc size 379mm

This Product Fits:

Porsche 997 MKII 2009-11 TURBO / GT2 Front
Porsche 991 2012-16 TURBO Front

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

379.069.6

The product you are viewing cross references to these numbers