ECU Re-Mapping DIY

ECU re-map tuning for your Porsche
for all Porsches made between 2000 - 2018 (Non Turbo engines). This unit will not fit 992 models.



Adds more Hp power and Nm torque
Up to 10% fuel savings
2 x re-programming if you change your car
1 driving modes
2-year engine warranty (up to 3000 EUR) for cars registered in Germany

MORE POWER:
More than it seems. Safe overtaking, even in summer with the air conditioner turned on. Unique technologies of power increase for naturally aspirated engines are available for you now.

For HP and Torque increase figures CLICK HERE

GERMAN QUALITY:
German quality and reliability in everything! All the parts meet the requirements of the automotive industry standards, and the stylish body is made from aluminium.

For more information CLICK HERE

Softronic ECU Flash Porsche 997.2 Carrera 3.8L Tune 09-11

The 2009 and up Porsche Carrera is a big change over previous models. The new 911 has switched from a Bosch ECU to now running a Siemens SDI system. The transmission can be had in a standard 6 speed manual or the new PDK transmission to complete with the GTR, M3, and others. Softronic has spent time engineering and developing software for the new FSI cars and is one of the only tuners in the world that can offer an ECU flash via the OBDII port. With some additional programming to adjust the cars timing and air fuel mixtures, Softronic is able to gain performance on both the 3.6L and the 3.8L 911.

3.8L Base - 385BHP and 310ft/lbs

3.8L Tuned with Performance Muffler - 421BHP and 341ft/lbs
3.8L Tune Only - 405BHP and 328ft/lbs

Softronic flashes the 997.2 Carrera through the OBDII port of the car. With their Flasher Client software, they are reading a full 1mb of the file to completely tune the ECU. Other companies claim to be able to do this, but are only read 128kb and making global changes. The ECU flash will alter your fuel and timing maps to give you a very linear increase over stock. For those worried about check engine lights, there are none! For those running a high flow cat or straight pipe exhaust systems, Softronic raises the O2 levels which will remove the possibility of having a CEL from this type of exhaust. Once the car is flashed, the low end torque and throttle response will be much improved. The mid-range of the RPM band will feel stronger as well. The overall improvement of drivability makes the 997.2 Carrera even more fun then it was originally. Since warranty is always a concern, Softronic also provides you with your original file. With this original file you can flash your car back to stock at any point. If you go to the dealer, there will be nothing visible through the Porsche PIWIS system. Softronic can program your vehicle no matter what country you are from or what octane you use. We have different maps for those running 91 octane or 93 octane and higher..

What are the benefits/functions of going with Softronic compared to the competition?
Softronic does not require the removal of your ECU from the car. There is no down time at all.
Your car can be flashed at your convenience from the comfort of your own garage.
Softronic reflashing is done via a Client Cable that is connected to the OBDII port. The customer simply plugs the cable into the car and reads the file with a laptop per the instructions with the cable. Once the file is downloaded, it is emailed to the Softronic secure server where the file is tuned and then emailed back to the client. The client simply uploads the file and they are done. Total process is about 1 hour.
Reflashing is done according to the vehicles octane level of pump gas and modifications are taken into account (Intake, Headers, Exhaust) to enhance power gains.

Price includes Tuned file and Software with Cable

For more information CLICK HERE

PLEASE NOTE: Please note that you will be emailed the instructions by Softronic shortly after placing the order with us.

Fabspeed XperTune Performance Software ECU Upgrade.
The Fabspeed XperTune Performance Software is an ECU performance upgrade developed for the Porsche 997.2 Carrera and Carrera S (2009–2012). Designed to optimise the factory engine calibration, the software improves horsepower, torque, throttle response and overall driving characteristics while retaining everyday drivability.

Fits:

• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12  

Rather than requiring the ECU to be removed and sent away for bench flashing, the XperTune system uses an included handheld tuning device that connects to the vehicle through its OBD-II diagnostic port. The handheld is also connected to a Windows PC during the tuning process, allowing the original vehicle data to be read and a custom Fabspeed calibration to be loaded onto the car.

What This Product Does:

The XperTune software changes the calibration within the vehicle's engine control unit to optimise engine performance.

The factory ECU contains calibration data that determines how the engine responds under different operating conditions. Performance software modifies relevant parameters to make better use of the engine's capabilities.

The upgrade is designed to provide:

• Increased horsepower
• Increased torque
• Improved throttle response
• Sharper engine response
• Improved acceleration
• More responsive driving characteristics
• Calibration tailored to the vehicle's configuration
• Better integration with compatible performance modifications

The objective is not simply to increase peak output, but to improve the way the engine responds throughout normal and performance driving.

How Does The XperTune System Work?
One of the main advantages of the XperTune package is that the ECU does not normally need to be physically removed and mailed away for tuning.

The included handheld device communicates with the vehicle through the OBD-II port.

The tuning process involves:

• Reading the vehicle's original ECU data using the handheld tuner.
• Connecting the handheld device to a compatible Windows computer.
• Sending the original vehicle data and relevant vehicle information to Fabspeed.
• Fabspeed creates a calibration for the vehicle's specific configuration.
• The custom tune file is returned electronically.
• The tune is transferred to the handheld device.
• The handheld is connected to the Porsche and the new calibration is written to the ECU.

This allows the tuning process to be completed without removing the ECU from the vehicle.

Why This Upgrade Matters:
The factory Porsche 997.2 Carrera already offers strong naturally aspirated performance, but ECU calibration provides an opportunity to optimise engine response without making major internal engine modifications.

The Fabspeed XperTune package can provide:

• Increased horsepower and torque
• Improved throttle response
• Sharper acceleration
• More responsive driving characteristics
• Calibration tailored to the vehicle
• Compatibility with suitable performance modifications
• Convenient OBD-II flashing
• No routine requirement to remove and ship the ECU
• Ability to restore the factory ECU calibration

For owners seeking additional performance while retaining the fundamental character of the naturally aspirated 997.2 Carrera, ECU software can be an effective part of a wider performance upgrade package.

Smartphone controlled ECU re-map tuning
for all Porsches made between 2000 - 2018 (Non Turbo engines). This unit will not fit 992 models.



Adds more Hp power and Nm torque
Up to 15% fuel savings
5 x re-programming if you change your car
3 driving modes
5-year warranty
App control
2-year engine warranty (up to 3000 EUR) for cars registered in Germany

MORE POWER:
More than it seems. Safe overtaking, even in summer with the air conditioner turned on. Unique technologies of power increase for naturally aspirated engines are available for you now.

For HP and Torque increase figures CLICK HERE

GERMAN QUALITY:
German quality and reliability in everything! All the parts meet the requirements of the automotive industry standards, and the stylish body is made from aluminium.

EASY TO MANAGE THE POWER
Total control over the power is in your hands. It is easy to use the GÄN due to the stylish mobile app, which allows you to choose a performance level. You can switch between modes in one touch. DYNAMIC power increase or ECO fuel economy is your choice only. You can also switch the device off and return it to the factory settings.

For more information CLICK HERE