Boots / Rear Lid / Locks and Latches

Switch Panel. Black.

RHD Cars.

Fits:
Porsche 987 Boxster
Porsche 997 C2 / C4 / C4S
Porsche 997 Turbo / GT2
Porsche Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99755101905A03

The product you are viewing cross references to these numbers

The OE Match bonnet and rear lid opener switch panel provides the interior controls for electrically releasing the front bonnet and rear lid, its matt black finish matches the specified switch-panel finish.

Fits

• Porsche 987 Boxster MKI / MKII 2005-12
• Porsche 987C Cayman MKI / MKII 2005>>
• Porsche 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
• Porsche 997 Turbo MKI / MKII 2007>>
• Porsche 997 GT3 2007-11
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  This product supersedes Porsche's old part number: 99761310501A05
  
  Diagram ref no 18
  
  What Is This Part?
  
  This is the cabin-mounted electrical switch panel used to request release of the front bonnet and rear lid. It brings the two release controls together, allowing the driver to select the required lid from inside the car. Operating a control sends a release request through the vehicle's electrical system to the corresponding release mechanism. On the 997, the rear control releases the engine compartment lid; the Boxster and Cayman applications use the rear control for rear luggage access.

What Does This Part Do?

• Requests front bonnet release: Provides the interior control for accessing the front luggage compartment.
• Requests rear lid release: Operates the rear release function appropriate to the vehicle.
• Keeps the controls together: Combines front and rear release selection in one interior panel.
• Provides a usable control surface: Gives the driver a physical switch to operate each electrical release.
  
  Why Replace This Part?

Replacement may be appropriate when inspection identifies worn switch contacts, a sticking or broken control, or damage to the panel housing. These faults can make a lid release intermittent or prevent the switch from registering an input. A damaged mounting area can also leave the panel loose in its trim.

A lid that will not open does not automatically indicate a failed switch. Battery condition, electrical supply, connectors, wiring and the release mechanism should be checked before replacing the panel. If the latch operates from another control but not from this panel, the switch and its connections warrant closer inspection.

When to Replace This Part?

• No response from a control: Testing confirms that the affected switch does not send a release request.
• Intermittent operation: A control works inconsistently after connector and wiring faults have been excluded.
• Abnormal operation: A control sticks, fails to return or only responds when operated at an angle.
• Physical damage: A broken control or cracked housing prevents normal use.
• Poor seating: Damaged retaining features prevent the panel from sitting securely; inspect the surrounding trim as well.
• Visible connection damage: Corrosion or damaged terminals require assessment of both the panel and vehicle connector.
  
  Where Is This Part Fitted?

Location: Inside the cabin beside the driver's seat, in the lid-release control area. The panel connects to the vehicle wiring and operates the remote front and rear release mechanisms.

Technical Details

• Finish: Matt black.
• Control functions: Front bonnet and rear lid electrical release.
  
  FAQs

• Is a non-opening lid always caused by this switch? No. Check the battery, electrical supply, connectors, wiring and release mechanism before concluding that the switch has failed.
• What should be checked before fitting? Compare the original reference, connector and mounting arrangement, and confirm the model-year and body-style application.
  
  Product Summary
  
  
• Product: Bonnet and rear lid opener switch panel.
• Brand: OE Match.
• Part reference: 99761310502A05.
• Superseded Porsche reference: 99761310501A05.
• Additional catalogue reference: 997613105032A05.
• Purpose: Provides interior electrical release controls for the front bonnet and rear lid.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761310502A05

The product you are viewing cross references to these numbers

Bonnet and rear lid opener switch panel. Black Mat.

Fits:
Porsche 987 Boxster MKI / MKII 2005-12
Porsche 987C Cayman MKI / MKII 2005>>
Porsche 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
Porsche 997 Turbo MKI / MKII 2007>>
Porsche 997 GT3 2007-11

This product supersedes Porsche's old part numbers:
- 99761310501A05

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761310503A05

The product you are viewing cross references to these numbers

Guide pin for bonnet & boot opening switch panel. 

Sold each - 2 required per car

Fits:
Porsche 986 Boxster - 2001 to 2004 
Porsche 987 Boxster - 2005 to 2012
Porsche 987 Cayman - 2006 to 2012
Porsche 996 C2 / C4 / C4S - 1998 to 2005
Porsche 996 turbo - 2001 to 2005 
Porsche 996 GT3 - 1999 to 2005
Porsche 997 - 2005 to 2012
Porsche 997 turbo - 2007 to 2012
Porsche 997 GT3 - 2007 to 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655187300

The product you are viewing cross references to these numbers

Rear Boot Lid Hinge.

Fits:
Porsche 987.1 Boxster MKI 2005>>2008
Porsche 987.2 Boxster MKII 2009>>2012

Diagram Ref No 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751215

The product you are viewing cross references to these numbers

Rear boot lid. Please note: Requires sealing compound part No 00004320438

Fits:
Porsche 987.1 Boxster / Boxster S 2005-08
Porsche 987.2 Boxster / Boxster S 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751201112GRV

The product you are viewing cross references to these numbers

Rear Lid Actuator.

Fits:
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751211701

The product you are viewing cross references to these numbers

Rear Lid Lower Lock.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751205301

The product you are viewing cross references to these numbers

Rear Spoiler / Lid Actuator.

Fits:
Porsche 987 Boxster MKI & MKII
Porsche 987C Cayman MKI & MKII 2006>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762411700

The product you are viewing cross references to these numbers

Rubber Stop For Rear Lid.

The OE Match Rubber Stop for Rear Lid is a replacement rubber buffer designed to support and cushion the rear lid when closed.

Fits:

• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster 986 2.7L 2003-04
• Porsche Boxster S 986 3.2L 2003-04
• Porsche Boxster 987 2.7L 2005-08/08
• Porsche Boxster 987 S 3.2/3.4L 2005-08/08
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 996 GT3 RS 2003-04
• Porsche 997 MK1 Carrera 2 3.6L 2005-08
• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4 3.6L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08
• Porsche 997 MK1 TURBO 2007-09
• Porsche 997 MK1 GT3 / GT3 RS 2007-09
• Porsche 997 MK1 GT2 2007-09
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII GT3 / GT3 RS 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08
• Porsche Cayman 2.9L 987C MKII 2009-12
• Porsche Cayman S / R 3.4L 987C MKII 2009-12
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95  

Diagram Ref No 39

Mounted at the rear lid or body contact point, the rubber stop helps prevent direct metal-to-metal contact while supporting correct lid positioning. It also helps absorb vibration and minor movement when driving, reducing rattles and protecting surrounding bodywork and latch components from unnecessary impact.

As rubber components age, they can harden, crack, flatten or disappear altogether. Replacing a deteriorated rear lid stop is a simple but important way to restore correct closure, reduce unwanted noise and maintain proper panel positioning.

What This Product Does:
The rear lid rubber stop acts as a small cushioning and support point between the lid and surrounding body structure.

When the lid is closed, the stop compresses slightly to support the panel and absorb movement. This helps keep the lid stable while preventing hard contact between painted or metal components.

Its main functions include:

• Cushioning the rear lid when it closes
• Preventing direct metal-to-metal contact
• Helping support correct rear lid positioning
• Reducing movement and vibration while driving
• Helping prevent rattles and knocking noises
• Protecting surrounding paintwork and body panels
• Reducing unnecessary load and movement at the latch
• Helping maintain consistent panel gaps
• Providing a more solid and refined closing action

Although it is a small component, the rubber stop contributes to both correct panel fit and everyday refinement.

Symptoms Of Wear Or Failure:
Rubber stops deteriorate naturally through age, heat, compression and exposure to moisture and environmental contaminants.

Common symptoms of a worn or failed rear lid rubber stop include:

• Rubber becoming hard or brittle
• Cracks or splits in the stop
• Stop becoming flattened or permanently compressed
• Pieces of rubber breaking away
• Stop missing completely
• Rear lid rattling over uneven roads
• Knocking or tapping noises from the rear lid
• Excessive movement when the lid is closed
• Lid sitting slightly too low or unevenly
• Poor or inconsistent panel gaps
• Rear lid requiring adjustment to close correctly
• Paint marks or contact points where the lid touches surrounding bodywork
• Increased strain or movement at the latch
• A harsher closing action than normal

Similar symptoms can also result from incorrect latch adjustment, worn hinges or other missing buffers, so the complete rear lid mounting and closure system should be inspected where necessary.

Why Replacement Matters:

• A rear lid should remain securely supported when closed. If the rubber stop becomes compressed, hardened or missing, the panel can move more than intended.
• This movement can create rattles and knocking noises and may allow the lid to contact surrounding bodywork. Over time, repeated contact can damage paintwork and create unnecessary wear around the lid, latch and mounting points.
• A deteriorated stop can also affect how the rear lid sits when closed, potentially resulting in uneven panel gaps or poor alignment.
• Replacing worn rubber stops helps restore the correct cushioning effect and supports the lid in its intended position. This can improve closure quality, reduce unwanted vibration and protect valuable surrounding bodywork.
• For older Porsche models, replacing aged rubber buffers is also worthwhile during restoration, as decades-old rubber may appear intact while having become significantly hardened or compressed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970314040

The product you are viewing cross references to these numbers

Socket head bolt – secures the slide rail to the water drain plate in the convertible top stowage compartment, where the roof folds for storage.

Sold individually; x4 required per vehicle. 

Fits:
Porsche 987 Boxster 2005-12

Diagram ref. 28.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006737609

The product you are viewing cross references to these numbers

Stop for convertible top stowage compartment - various thicknesses. 

 

Fits:
Porsche Boxster 987 2005-12 - All models. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 19