Boots / Rear Lid / Locks and Latches

Switch Panel. Black.

RHD Cars.

Fits:
Porsche 987 Boxster
Porsche 997 C2 / C4 / C4S
Porsche 997 Turbo / GT2
Porsche Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99755101905A03

The product you are viewing cross references to these numbers

The OE Match bonnet and rear lid opener switch panel provides the interior controls for electrically releasing the front bonnet and rear lid, its matt black finish matches the specified switch-panel finish.

Fits

• Porsche 987 Boxster MKI / MKII 2005-12
• Porsche 987C Cayman MKI / MKII 2005>>
• Porsche 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
• Porsche 997 Turbo MKI / MKII 2007>>
• Porsche 997 GT3 2007-11
  
  Check fitment for your specific vehicle (model, year, engine) before ordering.
  
  This product supersedes Porsche's old part number: 99761310501A05
  
  Diagram ref no 18
  
  What Is This Part?
  
  This is the cabin-mounted electrical switch panel used to request release of the front bonnet and rear lid. It brings the two release controls together, allowing the driver to select the required lid from inside the car. Operating a control sends a release request through the vehicle's electrical system to the corresponding release mechanism. On the 997, the rear control releases the engine compartment lid; the Boxster and Cayman applications use the rear control for rear luggage access.

What Does This Part Do?

• Requests front bonnet release: Provides the interior control for accessing the front luggage compartment.
• Requests rear lid release: Operates the rear release function appropriate to the vehicle.
• Keeps the controls together: Combines front and rear release selection in one interior panel.
• Provides a usable control surface: Gives the driver a physical switch to operate each electrical release.
  
  Why Replace This Part?

Replacement may be appropriate when inspection identifies worn switch contacts, a sticking or broken control, or damage to the panel housing. These faults can make a lid release intermittent or prevent the switch from registering an input. A damaged mounting area can also leave the panel loose in its trim.

A lid that will not open does not automatically indicate a failed switch. Battery condition, electrical supply, connectors, wiring and the release mechanism should be checked before replacing the panel. If the latch operates from another control but not from this panel, the switch and its connections warrant closer inspection.

When to Replace This Part?

• No response from a control: Testing confirms that the affected switch does not send a release request.
• Intermittent operation: A control works inconsistently after connector and wiring faults have been excluded.
• Abnormal operation: A control sticks, fails to return or only responds when operated at an angle.
• Physical damage: A broken control or cracked housing prevents normal use.
• Poor seating: Damaged retaining features prevent the panel from sitting securely; inspect the surrounding trim as well.
• Visible connection damage: Corrosion or damaged terminals require assessment of both the panel and vehicle connector.
  
  Where Is This Part Fitted?

Location: Inside the cabin beside the driver's seat, in the lid-release control area. The panel connects to the vehicle wiring and operates the remote front and rear release mechanisms.

Technical Details

• Finish: Matt black.
• Control functions: Front bonnet and rear lid electrical release.
  
  FAQs

• Is a non-opening lid always caused by this switch? No. Check the battery, electrical supply, connectors, wiring and release mechanism before concluding that the switch has failed.
• What should be checked before fitting? Compare the original reference, connector and mounting arrangement, and confirm the model-year and body-style application.
  
  Product Summary
  
  
• Product: Bonnet and rear lid opener switch panel.
• Brand: OE Match.
• Part reference: 99761310502A05.
• Superseded Porsche reference: 99761310501A05.
• Additional catalogue reference: 997613105032A05.
• Purpose: Provides interior electrical release controls for the front bonnet and rear lid.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761310502A05

The product you are viewing cross references to these numbers

Bonnet and rear lid opener switch panel. Black Mat.

Fits:
Porsche 987 Boxster MKI / MKII 2005-12
Porsche 987C Cayman MKI / MKII 2005>>
Porsche 997 Carrera MKI / MKII 2005>> COUPE/ CABRIO
Porsche 997 Turbo MKI / MKII 2007>>
Porsche 997 GT3 2007-11

This product supersedes Porsche's old part numbers:
- 99761310501A05

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761310503A05

The product you are viewing cross references to these numbers

Guide pin for bonnet & boot opening switch panel. 

Sold each - 2 required per car

Fits:
Porsche 986 Boxster - 2001 to 2004 
Porsche 987 Boxster - 2005 to 2012
Porsche 987 Cayman - 2006 to 2012
Porsche 996 C2 / C4 / C4S - 1998 to 2005
Porsche 996 turbo - 2001 to 2005 
Porsche 996 GT3 - 1999 to 2005
Porsche 997 - 2005 to 2012
Porsche 997 turbo - 2007 to 2012
Porsche 997 GT3 - 2007 to 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655187300

The product you are viewing cross references to these numbers

Rear Boot Lid Hinge.

Fits:
Porsche 987.1 Boxster MKI 2005>>2008
Porsche 987.2 Boxster MKII 2009>>2012

Diagram Ref No 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751215

The product you are viewing cross references to these numbers

Rear boot lid. Please note: Requires sealing compound part No 00004320438

Fits:
Porsche 987.1 Boxster / Boxster S 2005-08
Porsche 987.2 Boxster / Boxster S 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751201112GRV

The product you are viewing cross references to these numbers

Rear Lid Actuator.

Fits:
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751211701

The product you are viewing cross references to these numbers

Rear Lid Lower Lock.

Fits:
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98751205301

The product you are viewing cross references to these numbers

Rear Spoiler / Lid Actuator.

Fits:
Porsche 987 Boxster MKI & MKII
Porsche 987C Cayman MKI & MKII 2006>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762411700

The product you are viewing cross references to these numbers

Socket head bolt – secures the slide rail to the water drain plate in the convertible top stowage compartment, where the roof folds for storage.

Sold individually; x4 required per vehicle. 

Fits:
Porsche 987 Boxster 2005-12

Diagram ref. 28.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006737609

The product you are viewing cross references to these numbers

Stop for convertible top stowage compartment - various thicknesses. 

 

Fits:
Porsche Boxster 987 2005-12 - All models. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 19