Please wait…

Please wait while we process your order,
do not press the back button…

Porsche > Cayenne 9PA (955) 2003-2006 > 955 Cayenne Turbo S 4.5L 2006>> > Suspension & Axle >

Wheel Hub / Carrier

Bush for rear wheel carrier. Porsche 955 / 957 / 958 Cayenne >>2014

95534158810/1::1

Product Information

Bush for rear wheel carrier
OE Match bush for rear wheel carrier for Porsche 955 Cayenne 2003–2006, 957 Cayenne 2007–2010, and 958 Cayenne 2011–2014 models, excluding GTS and Turbo S models. This replacement suspension bush helps restore correct rear wheel carrier location, reduce unwanted movement, and support stable rear axle alignment.
Sold individually, 2 required per vehicle

Fits:
Porsche 955 Cayenne 2003 - 2006
Porsche 957 Cayenne 2007 - 2010

Porsche 958 Cayenne 2011 - 2014
* not GTS and Turbo S version

Diagram ref No 20

The rear wheel carrier bush helps locate and support the rear wheel carrier while allowing controlled suspension movement. A good bush helps maintain rear wheel geometry, ride stability, braking control, and tyre contact with the road.

Functions
•  Replaces the rear wheel carrier bush
•  Supports correct rear wheel carrier location
•  Helps maintain rear axle suspension geometry
•  Reduces unwanted suspension movement and vibration
•  Supports stable handling, braking, and cornering performance
•  Helps prevent knocking, looseness, and uneven rear tyre wear
•  OE Match replacement for Porsche Cayenne rear suspension repair.

Why Replace This Part?
Rear wheel carrier bushes are exposed to road impact, suspension load, moisture, corrosion, age, and constant movement. Over time, the rubber can crack, split, soften, wear, or separate from the sleeve. A worn bush can cause rear suspension knocking, poor wheel alignment, uneven tyre wear, unstable handling, vibration, or failed inspection. Replacing the bush helps restore rear suspension control and correct rear axle behaviour.

When to Replace This Part
•   Rear suspension knocking, clunking, or vibration is present
•   Rear wheel alignment cannot be set or held correctly
•   Rear tyres are wearing unevenly
•   The rear of the vehicle feels unstable during braking or cornering
•   The bush is cracked, split, worn, or separated
•   Rear wheel carrier or rear suspension work is being carried out
•   The vehicle has failed inspection due to suspension bush wear.

Where it fits on the car
This bush fits in the rear wheel carrier / rear axle suspension assembly on Porsche Cayenne models. It forms part of the rear suspension mounting and wheel carrier location system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534158810

95534158810

95534158800

The product you are viewing cross references to these numbers

4 4 4 4

Bush for rear wheel carrier. Porsche 955 / 957 / 958 Cayenne >>2014

95534158810::1

Product Information

Bush for rear wheel carrier
Genuine Porsche OE bush for the rear wheel carrier on selected Porsche 955, 957 and 958 Cayenne models. This original Porsche bonded rubber suspension bush fits within the rear wheel carrier / rear axle control arm assembly, helping locate the suspension correctly while absorbing road vibration and suspension movement.
Sold individually, 2 required per vehicle

Fits:
Porsche 955 Cayenne 2003 - 2006
Porsche 957 Cayenne 2007 - 2010

Porsche 958 Cayenne 2011 - 2014
* not GTS and Turbo S version

Diagram ref No 20

This bush is used in the rear axle wheel carrier / control arm assembly on selected Porsche Cayenne models.

What This Part Does / Functions
•  Helps locate the rear wheel carrier correctly
•   Allows controlled movement within the rear suspension assembly
•   Absorbs road shock, vibration and harshness
•   Supports correct rear suspension geometry
•   Helps maintain rear wheel alignment stability
•   Reduces looseness, knocking and excess movement from worn suspension bushes
•   Provides correct OE Porsche fitment and rubber compliance
•   Replaces a worn, split, perished or loose original bush.

Why Replace This Part?
Rear wheel carrier bushes are exposed to road load, suspension movement, braking force, acceleration load, dirt, water and age-related rubber deterioration. Over time, the rubber can crack, split, soften or separate from the bonded sleeve. A worn bush can cause rear suspension play, knocking noises, vague handling, uneven tyre wear and poor alignment stability. Replacing the bush with a Genuine Porsche OE rear wheel carrier bush helps restore correct suspension control, factory ride quality and stable handling.

Common Symptoms of a Worn Rear Wheel Carrier Bush
•   Knocking or clunking from the rear suspension
•   Rear axle vibration or harshness
•   Uneven rear tyre wear
•   Poor rear wheel alignment stability
•   Rear-end wandering or instability
•   Excessive movement in the rear wheel carrier / suspension arm
•   Suspension noise over bumps
•   Failed MOT / roadworthiness inspection due to bush wear.

When to Replace This Part
•   If the original bush is cracked, split, perished or separated
•   If there is excessive play in the rear wheel carrier
•   During rear suspension overhaul or wheel carrier repair
•   If rear suspension knocking is traced to the bush
•   If rear wheel alignment cannot be held correctly
•   After kerb, pothole or impact damage
•   When replacing related rear suspension arms or hardware
•   When restoring the suspension with correct Genuine Porsche OE parts.

Where It Fits on the Car
This bush fits in the rear axle wheel carrier / rear suspension control arm area. It forms part of the rear suspension assembly and helps connect the wheel carrier/control arm arrangement to the vehicle’s suspension mounting points.

Professional installation is recommended, as the old bush normally needs to be pressed out and the new bush pressed in correctly. A wheel alignment should be checked after suspension work.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534158810

95534158800

95534158810

The product you are viewing cross references to these numbers

Eccentric washer for alignment for Porsche Boxster / Cayman / 911 / Panamera / Taycan

PAF007648

Product Information

Eccentric washer for alignment
for Porsche Boxster / Cayman / 911 / Panamera / Taycan
Sold each.

Fits:
Porsche 911 (993 / 996 / 997 / 991 / 992)
Porsche Boxster (986 / 987 / 981)
Porsche Cayman (987 / 981 / 718)
Porsche Panamera (970)
Porsche Taycan

Alignment eccentric washer, also referred to as a cam adjust arm or control arm adjust cam, is used in the rear suspension of certain Porsche 911, Boxster, Cayman and Panamera models.

Position on Vehicle: Rear suspension — at the rear control arm or track rod mounting point, typically used to adjust alignment of the wheel carrier, track bar or control arm.

Applications: Ideal for when original eccentric bolts or washers are worn, alignment cannot be set correctly, or when replacing control arms/track rods and correct alignment geometry is required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF007648

99633121900

PAF007648

The product you are viewing cross references to these numbers

Front wheel hub. Porsche 955 Cayenne / 957 Cayenne

95534160511/1::1

Product Information

Front wheel hub.

oematch

Fits:
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534160511

114826

114 826

95534160511

95534160510

The product you are viewing cross references to these numbers

Front wheel hub. Porsche 955 Cayenne / 957 Cayenne

95534160511

Product Information

Front wheel hub.

porsche

95534160511

95534160510

114826

The product you are viewing cross references to these numbers

Over the stud wheel hub cleaner set. Textar

TEX1037

Product Information

Over the stud wheel hub cleaner set. Textar

textar

Cleaning kit for corroded wheel studs & adjacent hub surfaces

Removes dirt & corrosion & prepares surfaces for correct torque application
Ideal for preparing wheels, hubs and brake discs or drums for re-assembly
Suitable for use with power drill or air impact wrench

Kit contains:

Stud cleaner body including velcro pad
Replacement velcro pads x 2
Fine cleaning discs x 5
Coarse cleaning discs x 5

Find out about Textar product verification here

Rear wheel hub. Porsche 955 Cayenne / 957 Cayenne

95534160511::1

Product Information

Rear wheel hub

porsche

95534160511

95534160510

114826

The product you are viewing cross references to these numbers

Rear wheel hub. Porsche 955 Cayenne / 957 Cayenne

95534160511/1

Product Information

Rear Wheel Hub.
The OE Match Rear Wheel Hub is a premium-quality replacement suspension and driveline component designed to securely mount the rear wheel and brake assembly on compatible Porsche models. Manufactured to OE specifications for fit, strength and durability, this precision-engineered wheel hub provides the mounting point for the wheel, brake disc and wheel bearing, ensuring smooth wheel rotation, accurate alignment and dependable vehicle handling.

Fits:

Porsche 955 Cayenne 3.2L V6 2003-06
Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007-10
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne S / GTS 4.8L 2007-10
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10

Diagram Ref No 6

Manufactured from high-strength forged steel with precision-machined mounting faces and bearing journals, the rear wheel hub is engineered to withstand heavy cornering loads, braking forces, drivetrain torque and continual road impacts. Designed for direct OE-style installation, it provides factory-correct fitment with the original wheel bearing, driveshaft and brake components, making it ideal for suspension repairs, wheel bearing replacement and complete rear axle overhauls.

What This Product Does:

Provides the mounting point for the rear wheel and brake disc.
Supports smooth and accurate wheel rotation.
Interfaces with the rear wheel bearing assembly.
Transfers drive torque from the driveshaft to the wheel.
Maintains correct rear wheel alignment and stability.
Supports safe braking and suspension performance.
Restores factory rear axle functionality.
Forms an essential part of the rear suspension and drivetrain assembly.

Symptoms Of Wear Or Failure:

Wheel bearing noise or humming from the rear axle.
Excessive play in the rear wheel.
Vibration felt through the vehicle.
Uneven tyre wear.
Difficulty maintaining wheel alignment.
Visible damage or corrosion to the hub.
Wobbling brake disc or wheel.
ABS warning light caused by hub or sensor alignment issues (where applicable).
Clicking or knocking noises from the rear suspension.
MOT or vehicle inspection failure due to excessive wheel play.

Why Replacement Matters:

The rear wheel hub is subjected to continuous rotational forces, suspension loads, braking forces and drivetrain torque throughout the life of the vehicle. Over time, corrosion, impact damage, worn bearing mounting surfaces or thread damage can compromise the hub's structural integrity and affect the performance of surrounding components.
A damaged or worn wheel hub can lead to excessive wheel movement, accelerated wheel bearing wear, brake vibration and poor vehicle handling. If left unresolved, it may compromise braking performance and vehicle safety while placing additional stress on the suspension and drivetrain.
Replacing a worn or damaged hub with the OE Match Rear Wheel Hub restores precise wheel alignment, smooth rotation and reliable rear axle performance. Manufactured to OE standards using premium-quality forged steel, this replacement hub provides factory-style fitment, exceptional strength and long-lasting durability, ensuring the handling, safety and reliability expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534160511

114826

114 826

95534160511

95534160510

The product you are viewing cross references to these numbers

Steering knuckle, Front. Porsche 955 / 957 Cayenne

95534115

Product Information

Front steering knuckle / Pivot bearing / Swivel mounting
Genuine Porsche Original Equipment (OE) front steering knuckles - also referred to as uprights or stub axles - for the Porsche Cayenne (955 / 957) front suspension. Each knuckle is a precision-manufactured structural component that forms the central mounting point for the wheel hub/bearing assembly, brake caliper, and suspension arms. They provide correct geometry and strength as engineered by Porsche for optimum handling, alignment, and durability.

Fits:
Porsche 955 Cayenne 2003 - 2006
Porsche 957 Cayenne 2007 - 2010

Diagram ref no 1

The steering knuckle serves as the central structural link between the wheel hub, suspension arms, steering linkage, and brake assembly. It maintains precise wheel alignment while supporting vertical loads, steering forces, and braking torque during driving. By holding these components in correct relation, it ensures stable handling, accurate steering response, and even tyre and brake wear.

Replacing a worn or damaged steering knuckle is essential to maintain correct suspension geometry and safe vehicle handling. Deformation or fatigue can lead to poor wheel alignment, uneven tyre wear, steering instability, and compromised braking performance. Fitting a correct replacement restores factory-engineered strength, alignment accuracy, and overall driving safety.

Replace the steering knuckle if any of the following are present:
• Visible cracks, bends, or impact damage
• Persistent steering wander or alignment drift
• Excessive hub bearing play that cannot be corrected by bearing replacement alone
• After accident repair involving front suspension components
• Competitive or high-stress driving requiring restored precision

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534115

95534115510

95534115610

The product you are viewing cross references to these numbers

Steering knuckle, Front. Porsche 955 / 957 Cayenne

95534115

Product Information

Front steering knuckle / Pivot bearing / Swivel mounting
These OE Match steering knuckles are manufactured to replicate the original Porsche steering knuckles fitted to the front suspension of Porsche Cayenne 955 and 957 models. These knuckles form the structural pivot points for the wheel hub, suspension arms, and steering linkages.

Fits:

Porsche 955 Cayenne 3.2L V6 2003-06
Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007-10
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne S/GTS 4.8L 2007-10
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10

Diagram ref no 1

Each OE Match knuckle is designed to accept the wheel hub/bearing, brake caliper mounting points, suspension arm ball joints, and tie rod ends just like the genuine part - delivering correct fitment and restoring proper front-end geometry.

The steering knuckle supports the wheel assembly and transmits vertical and lateral loads from the suspension to the wheel hub, while also providing precise mounting points for steering and braking components. They ensure that wheel movement is controlled, predictable, and aligned with the vehicle’s original suspension design.

Function: Mounted at the front of the vehicle, the OE Match steering knuckle is the central pivot for the wheel hub and bearing assembly. It interfaces with control arms, strut/ball joint connections, and the steering tie rod to maintain proper steering response and suspension geometry. By holding these elements in the correct relation, the knuckle ensures stable wheel alignment, even tyre wear, and responsive handling under various road conditions.

Steering knuckles take significant load and impact forces as part of the front suspension and steering system. Over time, original knuckles can become worn or damaged from road impacts, corrosion, or general use - leading to misalignment, irregular tyre wear, and compromised handling. Installing OE Match steering knuckles restores correct mounting geometry, improves steering precision and safety, and extends the life of associated suspension and steering components.

Replace the steering knuckle if any of the following are present:
• Visible cracks, bends, or impact damage
• Persistent steering wander or alignment drift
• Excessive hub bearing play that cannot be corrected by bearing replacement alone
• After accident repair involving front suspension components
• Competitive or high-stress driving requiring restored precision

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534115

95534115510

95534115610

The product you are viewing cross references to these numbers

Wheel hub cleaning grinder head. Textar

TEX1039

Product Information

Wheel hub cleaning grinder head.

textar

Aluminium bell with steel core and 12,5 mm (1/2“) seat for use on pneumatic impact screwdrivers.
Corrosion between the rim and the wheel hub is removed so torque values can no longer be distorted.
Complete with 1 cleaning disc

Find out about Textar product verification here

DISPLAYING 1 to 11 (of 11 products)

Also found on these pages

About Wheel Hub / Carrier

Porsche Wheel Hub / Wheel Carrier | Design911 Suspension Components for Strength, Alignment & Precision Handling

The wheel hub and wheel carrier are essential components in your Porsche’s suspension and axle system. Together, they form the central mounting point for the wheel, brake disc, and bearing assembly, allowing smooth rotation and precise alignment. The wheel carrier (or knuckle) connects to the suspension arms and steering system, maintaining exact geometry for stability, safety, and control.

At Design911, we offer a comprehensive range of wheel hubs and wheel carriers, designed for performance, accuracy, and durability. Manufactured from high-grade steel or lightweight aluminium alloys, each component ensures optimal strength while keeping unsprung weight low. Whether for servicing, performance tuning, or full restoration, our parts are engineered to maintain the responsive handling and precision your Porsche was built to deliver.

What Do Wheel Hubs and Wheel Carriers Do?

Wheel hubs and carriers form the structural connection between the suspension and the rotating wheel assembly.

Core Functions:
• Support and align the wheel, bearing, and brake disc assembly.
• Maintain correct suspension geometry and camber settings.
• Transmit forces from braking, acceleration, and cornering.
• Ensure smooth wheel rotation with minimal resistance.
• Provide stable mounting points for control arms and steering links.

When in good condition, these components keep your Porsche’s handling precise, ensuring balance, comfort, and safety at every speed.

Why Do Wheel Hubs and Wheel Carriers Fail or Degrade?

These parts are constantly exposed to heavy loads, vibration, and environmental elements — leading to wear or damage over time.

Common Causes of Failure Include:
• Corrosion or rust compromising structural integrity.
• Wear in bearing seating areas causing looseness.
• Cracks or distortion from impact or collision damage.
• Deformation due to over-torqued fasteners or wheel stress.
• Heat transfer from braking leading to material fatigue.

Failure can result in noise, vibration, wheel misalignment, or uneven tyre wear — all of which affect handling and safety.

Why Replace or Upgrade Your Porsche Wheel Hub / Wheel Carrier?

Replacing worn or damaged hubs and carriers restores your Porsche’s suspension geometry, wheel alignment, and overall handling precision. High-performance replacements also improve strength and reduce unsprung weight for enhanced feedback and cornering response.

Key Benefits:
• Restores correct wheel alignment and hub stability.
• Eliminates vibration, noise, and uneven tyre wear.
• Improves steering response and chassis balance.
• Available for front and rear axle configurations.
• Fits Porsche 911, 944, 968, Boxster, Cayman, Panamera, Cayenne, and Macan models.
• Ideal for maintenance, restoration, or performance upgrades.

Design911’s Porsche wheel hubs and wheel carriers combine strength, precision, and reliability — keeping your Porsche stable, smooth, and perfectly aligned on every journey.

Highlights

• Premium Porsche wheel hubs and wheel carriers.
• Precision-machined for suspension geometry and alignment accuracy.
• Constructed from corrosion-resistant steel or lightweight alloy.
• Restores handling precision and ride stability.
• Suitable for both modern and classic Porsche models.
• Perfect for servicing, performance tuning, or full restoration.

Enter your VAT number here and click Verify:

Wheel Hub / Carrier

Suspension subframe / Wishbone / Headlight levelling system / Self-levelling sensor (PR:1BA, 1BE, 1BK, 1BW) Cayenne 9PA (955) 2003-06 401-00

Pivot bearing / Wheel hub Cayenne 9PA (955) 2003-06 401-05

Rear axle / Wheel carrier / Wishbone / Track rod / Wheel hub / Stone guard Cayenne 9PA (955) 2003-06 501-00