Fastenings & Fixings

Cap Closure For Ignition Coil Cover Cylinder 1-4.

The cap closure for the ignition coil cover is a small but essential component designed to secure the ignition coil cover in place on cylinders 1–4. This cap ensures that the protective engine cover remains firmly attached, helping to shield ignition components from dirt, moisture, and heat within the engine bay.

Fits:

• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
• Porsche 970.1 Panamera S V8 4.8L 2009-13
• Porsche 970.1 Panamera 4S V8 4.8L 2009-13
• Porsche 970.1 Panamera GTS V8 4.8L 2011-13
• Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
• Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
• Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
• Porsche 970.2 Panamera Turbo V8 Executive 2014-16
• Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16 

 
Diagram Ref No 7

What This Product Does:

• Secures the ignition coil cover in place
• Protects ignition coils and wiring from contaminants
• Maintains proper alignment of the engine cover
• Prevents movement or vibration of the cover during operation

Symptoms Of Wear Or Failure:

• Loose or poorly secured ignition coil cover
• Missing or broken cap closures
• Rattling noises from the engine cover area
• Engine cover not sitting correctly or lifting
• Visible wear, cracking, or deformation of the cap

Why Replacement Matters:

• Ensures the ignition coil cover is securely fastened
• Protects ignition components from dirt and moisture
• Prevents vibration and noise from loose covers
• Maintains correct engine bay appearance and organisation
• Supports long-term durability of ignition system components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7PP972487

The product you are viewing cross references to these numbers

Hexagon head bolt - M16 x 1.5 x 120 - for securing the rear track rod to the wheel carrier/knuckle.

Sold individually; x2 required per vehicle.

Fits:
Porsche 958 Cayenne 2011-18

Diagram ref. 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N91183301

The product you are viewing cross references to these numbers

Socket head bolt with hexagon socket head - M6 x 12 - for crankshaft position sensor. 

Fits:
Porsche 955 Cayenne S 4.5L 2003-06
Porsche 955 Cayenne Turbo / Turbo S 4.5L 2003-06

Porsche 957 Cayenne S 4.8L 2007-10
Porsche 957 Cayenne GTS 4.8L 2007-10 
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10

Porsche 958.1 Cayenne S 4.8L 2011-14
Porsche 958.1 Cayenne GTS 4.8L 2011-14
Porsche 958.1 Cayenne Turbo / Turbo S 4.8L 2011-14
Porsche 958.2 Cayenne Turbo / Turbo S 4.8L 2015-18

Diagram ref. 14.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01470111

The product you are viewing cross references to these numbers

Retaining Clip For Door Molding.
The Genuine Porsche Retaining Clip for Door Moulding is an original equipment body trim fastening component designed to securely attach the exterior door moulding to the door panel on compatible Porsche models. Manufactured to Porsche's exact specifications for fit, retention strength and durability, this precision-engineered retaining clip ensures the door moulding remains firmly secured, maintaining the vehicle's original appearance while preventing movement, vibration and accidental detachment.  
Sold Each.

Fits:

• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17 

 
Diagram Ref No 3

Manufactured from high-quality automotive-grade composite material, the retaining clip is engineered to resist corrosion, moisture, UV exposure, temperature fluctuations and continual vibration. Precision-moulded to Porsche's original dimensions, it provides factory-correct fitment and secure engagement with the door moulding and body panel, making it the ideal replacement during trim repairs, door moulding replacement or vehicle restoration.  

What This Product Does:

• Securely fastens the exterior door moulding to the door panel.
• Maintains the correct alignment of the door trim.
• Prevents movement and vibration of the moulding.
• Helps eliminate trim rattles and unwanted noise.
• Ensures secure and reliable trim retention.
• Supports the original appearance of the vehicle.
• Restores factory trim mounting performance.
• Forms an essential part of the exterior body trim system.

Symptoms Of Wear Or Failure:

• Loose or detached door moulding.
• Trim rattling while driving.
• Misaligned exterior door trim.
• Missing retaining clips.
• Broken or cracked clip body.
• Door moulding lifting away from the door panel.
• Increased vibration of the trim.
• Difficulty securing the moulding during installation.
• Visible damage to the clip caused by age or removal.
• Reduced exterior appearance due to loose trim.

Why Replacement Matters:

• Door moulding retaining clips are continually exposed to vibration, moisture, dirt, UV radiation and repeated removal during servicing or body repairs. Over time, the plastic material can become brittle, crack or lose its retaining strength, preventing the moulding from remaining securely attached.
• A damaged or missing retaining clip can allow the door moulding to loosen or detach, increasing the risk of trim damage, paint abrasion or loss while driving. Loose mouldings may also create unwanted rattles and detract from the overall appearance of the vehicle.
• Replacing worn or broken clips with Genuine Porsche components restores secure trim fitment and preserves the original finish of your vehicle. Manufactured to Porsche's exact engineering standards, the Genuine Porsche Retaining Clip for Door Moulding provides factory-correct fitment, exceptional durability and reliable long-term retention, ensuring the quality, appearance and refinement expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95555954700

The product you are viewing cross references to these numbers

Retaining Clip For Door Molding.
The OE MATCH Retaining Clip for Door Moulding is a body trim fastening component designed to securely attach the exterior door moulding to the door panel on compatible Porsche models. This precision-engineered retaining clip ensures the door moulding remains firmly secured, maintaining the vehicle's original appearance while preventing movement, vibration and accidental detachment.  
Sold Each.

Fits:

• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S / GTS 4.8L 2007-10
• Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
• Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
• Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17 

 
Diagram Ref No 3

The retaining clip is engineered to resist corrosion, moisture, UV exposure, temperature fluctuations and continual vibration. It provides correct fitment and secure engagement with the door moulding and body panel, making it the ideal replacement during trim repairs, door moulding replacement or vehicle restoration.  

What This Product Does:

• Securely fastens the exterior door moulding to the door panel.
• Maintains the correct alignment of the door trim.
• Prevents movement and vibration of the moulding.
• Helps eliminate trim rattles and unwanted noise.
• Ensures secure and reliable trim retention.
• Supports the original appearance of the vehicle.
• Forms an essential part of the exterior body trim system.

Symptoms Of Wear Or Failure:

• Loose or detached door moulding.
• Trim rattling while driving.
• Misaligned exterior door trim.
• Missing retaining clips.
• Broken or cracked clip body.
• Door moulding lifting away from the door panel.
• Increased vibration of the trim.
• Difficulty securing the moulding during installation.
• Visible damage to the clip caused by age or removal.
• Reduced exterior appearance due to loose trim.

Why Replacement Matters:

• Door moulding retaining clips are continually exposed to vibration, moisture, dirt, UV radiation and repeated removal during servicing or body repairs. Over time, the plastic material can become brittle, crack or lose its retaining strength, preventing the moulding from remaining securely attached.
• A damaged or missing retaining clip can allow the door moulding to loosen or detach, increasing the risk of trim damage, paint abrasion or loss while driving. Loose mouldings may also create unwanted rattles and detract from the overall appearance of the vehicle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95555954700

The product you are viewing cross references to these numbers