Support Brackets / Retainers / Braces

Adaptor kit to fit front 991.1 spoiler to 718 Boxster / Cayman with standard bumpers

Fits:
Porsche 718 Boxster / S / T- 2017 to 2024
Porsche 718 Cayman / S / T - 2017 to 2024

The OEM front lip spoiler solution for the Porsche 718 Boxster / Cayman with standard bumpers.

A properly integrated and quality solution for your Porsche using the newer generation 991.1 OEM Porsche sports spoiler and a purpose built adapter kit to achieve compatibility with 718 Porsche models (2017-24)

Benefits of the 991 OEM Spoiler? 
It creates a front-end aerodynamic profile similar to  newer models and provides more usability than wrap-around spoilers due to increased ground clearance at the corners. It’s an original Porsche part that looks great and provides a refreshing update to the 987 Boxster front end.

How our adapter kit works:
991 Spoiler mounting points are not compatible with the 718 Boxster / Cayman so the kit solves this problem with a unique set of adapters that:

• are strong, secure and will not damage your bumper in cases of spoiler scraping or impacts
• eliminate the risk of damaging components (such as headlight washer lines) inside the bumper
• are both re-usable and reversible

Installation:
Almost zero DIY skills are needed
Step by step instructions provided
30 - 60 minutes of quality time with your 911 depending on the kit
No need to remove the bumper
A jack or ramps to raise the front of the car makes installation very simple

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150552501

The product you are viewing cross references to these numbers

Front bumper fixing device
This Genuine Porsche bumper mounting component is used to secure and support the front bumper assembly, helping maintain correct alignment, fitment and factory appearance.
Sold individually

Fits:
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 981 Boxster 2012 - 2016
Porsche 982 (718) Boxster 2017>>

Porsche 987C.1 Cayman 2005 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 981 Cayman 2012 - 2016
Porsche 982 (718) Cayman 2017>>

Diagram ref no 5

This part is used within the front bumper / front-end covering assembly on selected Porsche Boxster and Cayman models.

What This Part Does / Functions
•  Helps secure the front bumper to the vehicle
•  Supports correct front bumper alignment and fitment
•  Helps hold bumper trim and front-end covering components in place
•  Maintains factory panel gaps and bumper positioning
•  Replaces a broken, cracked, damaged or missing fixing device
•  Supports correct reassembly after bumper removal
•  Provides Original Porsche fitment and quality
•  Helps restore the front bumper mounting system after accident or bodywork repair.

Why Replace This Part?
Front bumper fixing devices can become damaged during bumper removal, parking impacts, accident repairs or age-related wear. A broken or missing fixing device may cause poor bumper alignment, loose bumper corners, uneven panel gaps or rattling from the front bumper area. Replacing it with an Original Porsche front bumper fixing device helps restore the correct factory mounting arrangement and ensures the bumper sits securely and accurately.

Common Symptoms of a Damaged Bumper Fixing Device
•   Loose front bumper
•   Uneven bumper alignment
•   Poor panel gaps around the front bumper
•   Bumper corner not sitting flush
•   Rattling or movement from the front bumper area
•   Broken or missing mounting hardware
•   Damage found during bumper removal
•   Poor fitment after front-end repair.

When to Replace This Part
•   During front bumper removal or refitting
•   If the original fixing device is cracked, broken or missing
•   After front bumper impact or accident damage
•   During front bumper replacement or paintwork
•   When fitting or repairing front bumper trim components
•   If bumper alignment cannot be set correctly
•  During restoration or bodywork repair
•   When replacing front-end hardware with Original Porsche parts

Where It Fits on the Car
This fixing device fits in the front bumper / front-end covering mounting area. It forms part of the hardware used to locate and secure the front bumper assembly to the vehicle body. Correct positioning is important to ensure the bumper aligns properly with the surrounding panels and lights.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992807891

The product you are viewing cross references to these numbers

Front bumper fixing device
OE Match front bumper fixing device for Porsche 987, 981, and 982 Boxster and Cayman models. This replacement fixing component helps secure the front bumper assembly correctly, supporting proper bumper alignment and stable exterior panel fitment.
Sold individually

Fits:
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 981 Boxster 2012 - 2016
Porsche 982 (718) Boxster 2017>>

Porsche 987C.1 Cayman 2005 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 981 Cayman 2012 - 2016
Porsche 982 (718) Cayman 2017>>

Diagram ref no 5

The front bumper fixing device helps hold the bumper cover or related bumper trim components securely in position. A correctly fitted fixing device helps maintain proper panel alignment, prevents unwanted movement, and supports a clean factory-style front end finish.

Functions
•   Replaces the front bumper fixing device
•   Helps secure the front bumper assembly
•   Supports correct bumper cover alignment
•   Helps prevent looseness, rattling, or panel movement
•   Suitable for bumper removal, refitting, repair, or restoration
•   Supports original-style exterior fit and finish
•   OE Match replacement for Porsche Boxster and Cayman front bumper repair

Why Replace This Part?
Front bumper fixing components can become worn, broken, missing, cracked, corroded, or damaged during bumper removal, accident repair, bodywork, or age-related service. A missing or damaged fixing device may cause poor bumper alignment, loose trim, rattles, panel gaps, or insecure front bumper fitment. Replacing the fixing device helps restore secure bumper mounting and correct exterior presentation.

When to Replace This Part
•   Front bumper fixing device is missing, broken, or damaged
•   Front bumper cover is loose or poorly aligned
•   Bumper has been removed for repair or service
•   Exterior trim rattling or movement is present
•   Accident repair or bodywork is being carried out
•   Front bumper refit or restoration is in progress
•   Original fastening hardware is worn or no longer secure

Where it fits on the car
his fixing device fits within the front bumper assembly / front bumper mounting area on Porsche Boxster and Cayman models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992807891

The product you are viewing cross references to these numbers

Front bumper side bracket.



Fits:
Porsche 718 (982) Boxster 2017>>
Porsche 718 (982) Boxster Spyder 2019>>
Porsche 718 (982) Cayman 2017>>
Porsche 718 (982) Cayman GT4 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98280705

The product you are viewing cross references to these numbers