Cylinder Head / Camshaft Carrier

Cylinder head bolt. M 11 X 1.5 X 140.
SET OF 8.

Fits:
Porsche 957 Cayenne S / GTS / Turbo 2008-10
Porsche 958 Cayenne S / GTS / Turbo 2011-14
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera 3.6L 2011-16
Porsche 970 Panamera S / GTS / Turbo 2011-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810418110X8

The product you are viewing cross references to these numbers

Cylinder head bolt. M 11 X 1.5 X 140.
Price is for each.

Fits:
Porsche 957 Cayenne S / GTS / Turbo 2008-10
Porsche 958 Cayenne S / GTS / Turbo 2011-14
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera 3.6L 2011-16
Porsche 970 Panamera S / GTS / Turbo 2011-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810418110

The product you are viewing cross references to these numbers

Cylinder head gasket. Cyl 4-6.

Fits:
Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
Porsche Panamera 3.6L 2011>>
Porsche Macan S / Turbo / GTS 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417403

The product you are viewing cross references to these numbers

Cylinder head gasket Cyl. 1-3.

Fits:
Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
Porsche Panamera 3.6L 2011>>
Porsche Macan S / Turbo / GTS 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 34

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417303

The product you are viewing cross references to these numbers

Cylinder head gasket set.
(for engine codes:  CWF, CTM & CWD)

Fits:

• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
• Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
• Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
  
  
• Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18

Contents:
- Engine head gaskets
- Valve cover gaskets
- Valve cover seals
- Timing chain cover gaskets
- Oil filler cap seal
- Cover cap seal
- Valve stem seals
- Exhaust head to manifold gaskets
- Exhaust manifold to cat

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417303

The product you are viewing cross references to these numbers

This OE Match cylinder head gasket is for cylinders 4–6, It seals the joint between the cylinder head and engine block, containing combustion pressure and separating oil and coolant passages. 

Fits

• Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
• Porsche Panamera 3.6L 2011>>
• Porsche Macan S / Turbo / GTS 2014>>
  
  Diagram ref no 35
  
  Check fitment for your specific vehicle (model, year, engine) before ordering. Confirm that the gasket required is for cylinders 4–6.
  
  What Is This Part?

The cylinder head gasket is the sealing layer clamped between the cylinder head and the engine block. Its openings align with the cylinders and the passages crossing this joint. It must seal combustion gases while keeping engine oil and coolant within their respective circuits. Its sealing action depends on the condition of the mating surfaces and the correct clamping force from the cylinder-head fasteners. 

What Does This Part Do?

• Contains combustion pressure: Seals around the combustion chambers at the head-to-block joint.
• Seals coolant passages: Helps prevent coolant escaping across the joint.
• Seals oil passages: Helps contain engine oil where it passes between the block and cylinder head.
• Separates engine circuits: Maintains sealing boundaries between combustion gases, oil and coolant. 
  
  Why Replace This Part?

Replacement may be needed when testing identifies leakage through the cylinder-head joint or inspection reveals damaged sealing areas. Overheating, distorted mating surfaces and incorrect bolt tightening can compromise the seal. A new gasket alone will not correct a warped cylinder head or an unresolved cooling-system fault, so the underlying cause must be investigated during the repair.

During cylinder-head work, have the head and block sealing surfaces checked before reassembly. Follow the engine-specific requirements for surface preparation, fastener renewal and tightening sequence rather than assuming that fitting a gasket is the only work required. 

When to Replace This Part?

• Confirmed joint leakage: Testing identifies combustion-gas, oil or coolant leakage through the head-gasket joint.
• Visible sealing damage: Inspection after dismantling reveals burning, erosion or damage around sealing areas.
• Overheating-related damage: Examination finds gasket damage or distorted mating surfaces following overheating.
• Incorrect previous installation: Inspection reveals misalignment, damaged sealing areas or inadequate clamping. Coolant loss and overheating require diagnosis; neither proves gasket failure on its own. 
  
  Where Is This Part Fitted?

Location: Between the cylinder head and engine block on the bank containing cylinders 4–6.

Technical Details

• Cylinder position: Cylinders 4–6.
• Macan application identifiers: CTMA, CTM, CTLA, CTL, DCNA, DCN, DHKA, DHK.
• Panamera 3.6L application identifiers: 4620, 4640, CWAA, CXNA.
  
  Product Summary

• Product: Cylinder head gasket for cylinders 4–6.
• Brand: OE Match.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417403

The product you are viewing cross references to these numbers

This OE Match cylinder head gasket is for cylinders 1–3, It seals the joint between the cylinder head and engine block, containing combustion gases and separating the oil and coolant passages. 

Fits

• Porsche 958 Cayenne 3.6L V6 Turbo / GTS 2014>>
• Porsche Panamera 3.6L 2011>>
• Porsche Macan S / Turbo / GTS 2014>>
  
  Check fitment for your specific vehicle (model, year, engine) before ordering. Confirm the cylinders 1–3 position against the existing gasket and exact engine specification.
  
  Diagram ref no 34
  
  What Is This Part?

A cylinder head gasket forms the sealing interface beneath the cylinder head. When the head is secured, the gasket is compressed between the mating surfaces to seal the combustion chambers and the fluid passages crossing that joint. This version is identified for cylinders 1–3, so the cylinder-bank application matters when selecting it for a repair. Effective sealing also depends on the condition of the head and block surfaces and the correct installation procedure. 

What Does This Part Do?

• Seals combustion pressure: Closes the head-to-block joint around the combustion chambers.
• Seals coolant passages: Helps contain coolant where it passes between the block and cylinder head.
• Seals oil passages: Helps contain the lubricating oil passing through the joint.
• Separates engine circuits: Maintains sealing boundaries between combustion gases, coolant and oil. 
  
  Why Replace This Part?

Replacement may be needed when inspection confirms leakage or damage at the cylinder head joint. Overheating, distorted mating surfaces, incorrect positioning or inadequate clamping can compromise the seal. The underlying cause should be investigated rather than assuming that a new gasket alone will resolve the problem. 

During cylinder head repairs, check surface condition, locating sleeves and fastening requirements before reassembly. Follow the engine-specific preparation and tightening instructions; a gasket cannot compensate for damaged or incorrectly prepared mating surfaces. 

When to Replace This Part?

• Confirmed joint leakage: Oil or coolant is traced to the head-to-block interface rather than a nearby seal or connection.
• Combustion leakage: Testing identifies combustion gases escaping through the cylinder head joint.
• Overheating damage: Inspection reveals gasket damage or distortion of the adjoining surfaces.
• Visible gasket damage: Dismantling reveals burnt sealing areas, damaged openings or evidence of incorrect seating. 
  
  Where Is This Part Fitted?

Location: Between the engine block and the cylinder head serving cylinders 1–3, within the cylinder head assembly.

Technical Details

• Cylinder position: Cylinders 1–3.
• Macan engine/model identifiers: CTMA, CTM, CTLA, CTL, DCNA, DCN, DHKA, DHK.
• Panamera 970 (G1) 3.6L engine/model identifiers: 4620, 4640, CWAA, CXNA.
  
  FAQs

• Does low compression automatically mean this gasket has failed?
  No. Compression and leak-down testing can help establish the source of a sealing problem before dismantling or selecting replacement parts.
• Should the cylinder head be checked during replacement?
  Yes. Check the mating surfaces for damage and flatness, particularly after overheating, and follow the engine-specific repair instructions. 
  
  Product Summary

• Product: Cylinder head gasket for cylinders 1–3.
• Brand: OE Match.
• Fitting position: Cylinder head-to-block joint.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610417303

The product you are viewing cross references to these numbers

Engine valve cover gasket Cyl. 1-3.

Fits:
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera S 3.0L 2014-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593565

The product you are viewing cross references to these numbers

Engine valve cover gasket Cyl. 1-3.

Fits:
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera S 3.0L 2014-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593565

The product you are viewing cross references to these numbers

Engine valve cover gasket Cyl. 4-6.

Fits:
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera S 3.0L 2014-16

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593665

The product you are viewing cross references to these numbers

Engine valve cover gasket Cyl. 4-6.

Fits:
Porsche 958 Cayenne V6 3.6L 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 970 Panamera S 3.0L 2014-16

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593665

The product you are viewing cross references to these numbers

Gasket for spark plug holes in valve cover.
Sold each.

Fits:
Porsche 958 Cayenne 3.6L 2010-18
Porsche 95B.1 Macan 3.0L / 3.6L 2014-18
Porsche 970 Panamera 3.0L 2013-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593765

The product you are viewing cross references to these numbers

Gasket for spark plug holes in valve cover.
Sold each.

Fits:
Porsche 958 Cayenne 3.6L 2010-18
Porsche 95B.1 Macan 3.0L / 3.6L 2014-18
Porsche 970 Panamera 3.0L 2013-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94610593765

The product you are viewing cross references to these numbers

O-ring 10x2.5N For Cylinder Head Choke.
Sold Each.

Fits:

Porsche 997.2 Carrera 3.6 / 3.8L MKII 2009>>2012
Porsche 997.2 Turbo 3.8L MKII 2010>>2013
Porsche 991.1 Carrera MKI 2012>>2016
Porsche 991.2 Carrera MKII 2017>>2019
Porsche 991 Turbo MKI / MKII 2014>>2020
Porsche 992.1 Carrera MKI 2019>>2024
Porsche 992.2 Carrera MKII 2025>>
Porsche 992 Turbo 2020>>
Porsche 987.2 Boxster MKII 2009>>2012
Porsche 987.2 Cayman MKII 2009>>2012
Porsche 981 Boxster 2012>>2016
Porsche 981 Boxster Spyder 2016
Porsche 982 Boxster 2017>>
Porsche 981 Cayman 2014>>2016
Porsche 981 Cayman GT4 2016
Porsche 982 Cayman 2017>>
Porsche 95B.1 Macan 3.0L / 3.6L MKI 2014>>2018
Porsche 957 Cayenne 4.8L 2007>>2010
Porsche 958 Cayenne 3.6L / 4.8L 2011>>2018
Porsche 970 Panamera 3.0L / 3.6L / 4.8L MKI / MKII 2009>>2016

Diagram Ref No 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A700827200

The product you are viewing cross references to these numbers