Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Brake Pad Wear Sensors
Filter by brand
95B907253C
Product Information
Porsche Macan (I1LY) 2014>> (FRONT)
* I1LY - 19" disc, brake caliper painted Yellow (PCCB) Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253C
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads. Porsche Macan (I1LY) 2014>> (FRONT)
* I1LY - 19" disc, brake caliper painted Yellow (PCCB) Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253C
95B907253C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £37.73
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253C/1
Product Information
Porsche Macan (I1LY) 2014>> (FRONT)
* I1LY - 19" disc, brake caliper painted Yellow (PCCB) Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253C
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.Porsche Macan (I1LY) 2014>> (FRONT)
* I1LY - 19" disc, brake caliper painted Yellow (PCCB) Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253C
95B907253C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £9.95
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253
Product Information
Genuine Porsche OE front brake pad wear sensor for Porsche Macan 3.0L models. This original Porsche wear sensor is fitted to the front brake pad assembly and monitors brake pad wear, helping alert the driver when the pads are reaching their service limit.
Sold individually, There are 2 per axle.
Porsche Macan 3.0L PETROL
Porsche Macan 3.0L DIESEL
Porsche Macan 3.0L GTS
Porsche Macan 3.6L TURBO 400BHP
Part number 95B907253 is a Genuine Porsche front brake pad wear sensor, also known as a brake wear indicator, pad wear warning sensor or sender wire for the brake pad wear indicator.
It is used on the front axle braking system of selected Porsche Macan models, including 3.0L V6 applications. The sensor is designed to fit into the brake pad and connect to the vehicle’s brake wear monitoring circuit.
What This Part Does / Functions
• Monitors front brake pad wear
• Helps trigger a dashboard warning when brake pads are worn
• Supports timely brake pad replacement
• Fits into the front brake pad assembly
• Connects to the Porsche brake wear warning system
• Helps protect brake discs from damage caused by over-worn pads
• Maintains OE Porsche brake monitoring function
• Provides correct fitment for front axle brake service.
Why Replace This Part?
Brake pad wear sensors are designed to wear along with the brake pads. Once the sensor has triggered the warning light, it is normally damaged and should be replaced. Sensors can also become brittle, broken or damaged during brake pad removal. Replacing the sensor with a Genuine Porsche OE brake pad wear sensor helps restore the factory brake wear warning system and ensures the vehicle can correctly monitor front brake pad condition after service.
When to Replace This Part
• When replacing front brake pads
• If the brake pad wear warning light is on
• If the original sensor has worn through
• If the sensor wire is damaged, broken or brittle
• If the connector is damaged or corroded
• During front brake disc and pad replacement
• When restoring the brake system with correct OE Porsche parts.
Where It Fits on the Car
This sensor fits on the front axle brake system. It is installed into the front brake pad assembly and connects to the brake pad wear warning wiring.
Depending on the brake setup, it may be used on the left or right front side. Always match the sensor to the correct brake system and vehicle specification.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253
The product you are viewing cross references to these numbers
Product Information
Front Brake pad wear sensorsGenuine Porsche OE front brake pad wear sensor for Porsche Macan 3.0L models. This original Porsche wear sensor is fitted to the front brake pad assembly and monitors brake pad wear, helping alert the driver when the pads are reaching their service limit.
Sold individually, There are 2 per axle.
Porsche Macan 3.0L PETROL
Porsche Macan 3.0L DIESEL
Porsche Macan 3.0L GTS
Porsche Macan 3.6L TURBO 400BHP
Part number 95B907253 is a Genuine Porsche front brake pad wear sensor, also known as a brake wear indicator, pad wear warning sensor or sender wire for the brake pad wear indicator.
It is used on the front axle braking system of selected Porsche Macan models, including 3.0L V6 applications. The sensor is designed to fit into the brake pad and connect to the vehicle’s brake wear monitoring circuit.
What This Part Does / Functions
• Monitors front brake pad wear
• Helps trigger a dashboard warning when brake pads are worn
• Supports timely brake pad replacement
• Fits into the front brake pad assembly
• Connects to the Porsche brake wear warning system
• Helps protect brake discs from damage caused by over-worn pads
• Maintains OE Porsche brake monitoring function
• Provides correct fitment for front axle brake service.
Why Replace This Part?
Brake pad wear sensors are designed to wear along with the brake pads. Once the sensor has triggered the warning light, it is normally damaged and should be replaced. Sensors can also become brittle, broken or damaged during brake pad removal. Replacing the sensor with a Genuine Porsche OE brake pad wear sensor helps restore the factory brake wear warning system and ensures the vehicle can correctly monitor front brake pad condition after service.
When to Replace This Part
• When replacing front brake pads
• If the brake pad wear warning light is on
• If the original sensor has worn through
• If the sensor wire is damaged, broken or brittle
• If the connector is damaged or corroded
• During front brake disc and pad replacement
• When restoring the brake system with correct OE Porsche parts.
Where It Fits on the Car
This sensor fits on the front axle brake system. It is installed into the front brake pad assembly and connects to the brake pad wear warning wiring.
Depending on the brake setup, it may be used on the left or right front side. Always match the sensor to the correct brake system and vehicle specification.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253
95B907253
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £38.12
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253/1
Product Information
This OE Match front brake pad wear sensor is a replacement wear indicator sensor for Porsche Macan 3.0L models. It is designed to match the original-style fitment and function. Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.
Sold individually, There are 2 per axle.
Porsche Macan 3.0L PETROL
Porsche Macan 3.0L DIESEL
Porsche Macan 3.0L GTS
Porsche Macan 3.6L TURBO 400BHP
The brake pad wear sensor fits into the front brake pad assembly and alerts the driver when the brake pads have reached their wear limit. When the sensor contacts the brake disc due to pad wear, it triggers the brake pad warning system, indicating that the pads need inspection or replacement.
Functions:
• Monitors front brake pad wear
• Helps activate the brake pad warning light when pads are worn
• Supports safe brake maintenance intervals
• Fits into the front brake pad assembly
• Replaces worn, damaged, cut, or triggered original sensors
• Recommended when replacing front brake pads
• OE Match replacement for Porsche Macan brake service.
Why Replace This Part?
Brake pad wear sensors are designed to wear with the brake pads and should usually be replaced once triggered. They can also become damaged during brake pad removal, corrode, break, or give false warnings if the wiring is worn. Replacing the sensor during front brake pad service helps restore accurate brake wear monitoring and correct dashboard warning operation.
When to Replace This Part
• The front brake pad warning light is on Front brake pads are being replaced
• The original sensor has been triggered or worn through
• The sensor wire is damaged, brittle, cut, or corroded
• Brake pad wear warnings remain after service
• The front brake system is being inspected or repaired
• Preventative replacement is being carried out during brake maintenance.
Where it fits on the car
This sensor fits on the front brake pad assembly on Porsche Macan 3.0L models. It connects into the vehicle’s brake pad wear warning system according to the factory brake layout.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253
The product you are viewing cross references to these numbers
Product Information
Front Brake pad wear sensorsThis OE Match front brake pad wear sensor is a replacement wear indicator sensor for Porsche Macan 3.0L models. It is designed to match the original-style fitment and function. Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.
Sold individually, There are 2 per axle.
Porsche Macan 3.0L PETROL
Porsche Macan 3.0L DIESEL
Porsche Macan 3.0L GTS
Porsche Macan 3.6L TURBO 400BHP
The brake pad wear sensor fits into the front brake pad assembly and alerts the driver when the brake pads have reached their wear limit. When the sensor contacts the brake disc due to pad wear, it triggers the brake pad warning system, indicating that the pads need inspection or replacement.
Functions:
• Monitors front brake pad wear
• Helps activate the brake pad warning light when pads are worn
• Supports safe brake maintenance intervals
• Fits into the front brake pad assembly
• Replaces worn, damaged, cut, or triggered original sensors
• Recommended when replacing front brake pads
• OE Match replacement for Porsche Macan brake service.
Why Replace This Part?
Brake pad wear sensors are designed to wear with the brake pads and should usually be replaced once triggered. They can also become damaged during brake pad removal, corrode, break, or give false warnings if the wiring is worn. Replacing the sensor during front brake pad service helps restore accurate brake wear monitoring and correct dashboard warning operation.
When to Replace This Part
• The front brake pad warning light is on Front brake pads are being replaced
• The original sensor has been triggered or worn through
• The sensor wire is damaged, brittle, cut, or corroded
• Brake pad wear warnings remain after service
• The front brake system is being inspected or repaired
• Preventative replacement is being carried out during brake maintenance.
Where it fits on the car
This sensor fits on the front brake pad assembly on Porsche Macan 3.0L models. It connects into the vehicle’s brake pad wear warning system according to the factory brake layout.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253
95B907253
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £9.95
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253D
Product Information
Porsche Macan Turbo 440Bhp (FRONT)
Cars with factory power kit
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253D
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.Porsche Macan Turbo 440Bhp (FRONT)
Cars with factory power kit
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253D
95B907253D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £38.17
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253D/1
Product Information
Sold each - 2 required per car
Porsche Macan Turbo 440Bhp (FRONT)
Cars with factory power kit
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253D
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.Sold each - 2 required per car
Porsche Macan Turbo 440Bhp (FRONT)
Cars with factory power kit
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253D
95B907253D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £11.92
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
4G0615121A
Product Information
Porsche Macan 2014>> All (REAR)
For cars with PCCB Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4G0615121A
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should be replaced when replacing your brake pads. Porsche Macan 2014>> All (REAR)
For cars with PCCB Ceramic discs.
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4G0615121A
95B615301B
4G0615121A
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £43.67
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
4G0615121A/1
Product Information
Fits:
Manufactured using high-quality heat-resistant materials with durable insulated wiring and corrosion-resistant electrical connectors, the brake pad wear sensor is engineered to withstand the extreme temperatures, brake dust, moisture and vibration associated with the rear braking system. Designed for direct OE-style installation, it integrates seamlessly with the vehicle's electronic brake wear monitoring system, ensuring reliable operation and factory-correct functionality.
What This Product Does:
Symptoms Of Wear Or Failure:
Why Replacement Matters:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4G0615121A
The product you are viewing cross references to these numbers
Product Information
Brake Pad Wear Sensor, Rear. The OE Match Rear Brake Pad Wear Sensor is a premium-quality replacement braking system component designed to accurately monitor the condition of the rear brake pads on compatible Porsche models. Manufactured to OE specifications for fit, performance and durability, this sensor provides an early warning when the rear brake pads have reached their service limit, allowing timely replacement to maintain optimum braking performance and vehicle safety.
Fits:
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Manufactured using high-quality heat-resistant materials with durable insulated wiring and corrosion-resistant electrical connectors, the brake pad wear sensor is engineered to withstand the extreme temperatures, brake dust, moisture and vibration associated with the rear braking system. Designed for direct OE-style installation, it integrates seamlessly with the vehicle's electronic brake wear monitoring system, ensuring reliable operation and factory-correct functionality.
What This Product Does:
- Monitors the wear level of the rear brake pads.
- Sends a warning signal when the brake pads reach their service limit.
- Activates the dashboard brake pad wear warning light.
- Helps ensure brake pads are replaced at the correct service interval.
- Supports safe and consistent braking performance.
- Integrates with the vehicle's electronic brake monitoring system.
- Restores factory brake wear monitoring functionality.
- Forms an essential part of the rear braking system.
Symptoms Of Wear Or Failure:
- Brake pad wear warning light remaining illuminated.
- Brake pad warning light failing to illuminate despite worn brake pads.
- Intermittent brake wear warning messages.
- Brake system fault codes relating to the wear sensor.
- Damaged or broken sensor wiring.
- Corroded or damaged electrical connector.
- Physical damage during brake servicing.
- Incorrect brake wear indication.
- Dashboard brake system warning message.
- MOT or vehicle inspection concerns relating to the braking system.
Why Replacement Matters:
- The rear brake pad wear sensor is continually exposed to high temperatures, brake dust, water, road debris and vibration. As the brake pads wear, the sensor is designed to contact the brake disc at a predetermined point, triggering the dashboard warning light. Once activated, or if damaged during brake servicing, the sensor should always be replaced.
- A faulty or damaged wear sensor can provide inaccurate brake wear information, potentially delaying essential brake maintenance or generating unnecessary warning messages. This can lead to excessive brake pad wear, damage to the brake discs and compromised braking performance.
- Replacing the rear brake pad wear sensor whenever new brake pads are installed helps ensure accurate brake wear monitoring and reliable warning system operation. The OE Match Rear Brake Pad Wear Sensor is manufactured to OE standards using premium-quality materials, providing factory-style fitment, dependable performance and long-lasting durability, helping maintain the safety, reliability and braking performance expected from your Porsche.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4G0615121A
4G0615121A
PAB615121A
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Price: £9.95
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PAB615121
Product Information
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB615121
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should be replaced when replacing your brake pads.- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 380Bhp 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 440Bhp 2019-21
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB615121
PAB615121
4G0615121
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
Price: £35.65
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253A
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.
Sold individually, typically 2 sensors per axle for complete front pad sets
Fits:
Porsche 95B.1 Macan 2.0L 2014 - 2018 FRONT
Brake pad wear sensors are designed to sense when brake pads reach a critical wear point. When the friction material becomes thin enough, the sensor’s circuit is completed (or broken) and the vehicle’s instrument cluster triggers a brake pad warning light. This alerts the driver that pad replacement is due, helping prevent rotor damage and preserve safe braking performance.
Functions & Technical Role
• Wear detection: Monitors pad thickness and detects end-of-life condition for brake pads.
• Driver alert: Interfaces with the onboard brake electronics to trigger a dashboard pad wear warning.
• Braking safety support: Helps ensure brakes are serviced before performance is compromised.
• OEM quality and fit: Manufactured to original Porsche dimensions, connectors and electrical specifications for seamless integration with brake wiring harnesses.
Brake pad wear sensors play an important safety and maintenance role. Without a functioning sensor, the vehicle cannot warn the driver when pads are worn to a critical level, increasing the risk of brake performance degradation, rotor damage, and potentially unsafe stopping distances. Replacing worn or damaged sensors with Porsche Genuine OE parts ensures the brake wear monitoring system functions exactly as designed
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253A
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensor, FRONT.Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.
Sold individually, typically 2 sensors per axle for complete front pad sets
Fits:
Porsche 95B.1 Macan 2.0L 2014 - 2018 FRONT
Brake pad wear sensors are designed to sense when brake pads reach a critical wear point. When the friction material becomes thin enough, the sensor’s circuit is completed (or broken) and the vehicle’s instrument cluster triggers a brake pad warning light. This alerts the driver that pad replacement is due, helping prevent rotor damage and preserve safe braking performance.
Functions & Technical Role
• Wear detection: Monitors pad thickness and detects end-of-life condition for brake pads.
• Driver alert: Interfaces with the onboard brake electronics to trigger a dashboard pad wear warning.
• Braking safety support: Helps ensure brakes are serviced before performance is compromised.
• OEM quality and fit: Manufactured to original Porsche dimensions, connectors and electrical specifications for seamless integration with brake wiring harnesses.
Brake pad wear sensors play an important safety and maintenance role. Without a functioning sensor, the vehicle cannot warn the driver when pads are worn to a critical level, increasing the risk of brake performance degradation, rotor damage, and potentially unsafe stopping distances. Replacing worn or damaged sensors with Porsche Genuine OE parts ensures the brake wear monitoring system functions exactly as designed
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253A
95B907253A
95B907253G
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Price: £37.02
Orderable - 14 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
95B907253A/1
Product Information
OE Match replacement sensor designed to monitor the wear level of the front brake pads on the Porsche Macan 2.0L (95B). It delivers accurate, OE-equivalent performance that works with the vehicle’s onboard diagnostics system to notify the driver when brake pads require service.
Sold individually, typically 2 sensors per axle for complete front pad sets
Fits:
Porsche 95B.1 Macan 2.0L 2014 - 2018 FRONT
The sensor functions as an early warning device: when the brake pad friction material wears down to its service limit, the sensor changes electrical resistance or completes/disconnects a circuit that triggers the brake wear indicator on the dashboard. This timely alert helps prevent excessive pad wear and potential damage to the brake rotors.
The sensor installs directly into the caliper/pad assembly on the front axle, using the original mounting clips and wiring harness. This OE Match unit is ideal for brake pad replacement intervals, preventative maintenance, or whenever the original sensor is damaged or corroded.
The front brake pad wear sensor detects the remaining thickness of the brake pad friction material. When pads wear to the minimum safe level, it signals the vehicle’s onboard warning system to prompt brake service, helping protect the rotors and maintain consistent braking performance.
Function:
• Monitors front brake pad wear level
• Interfaces with vehicle’s dashboard warning system
• Alerts driver when front pads need replacement
Brake pads naturally wear over time with use. Without a functioning wear sensor, worn pads may go unnoticed, leading to decreased braking performance, rotor scoring, and higher repair costs. Installing a correct OE Match brake pad wear sensor ensures you receive timely warnings so pads can be replaced before damage occurs.
When to replace:
• Brake wear warning light illuminates
• Sensor damaged or corroded
• After front brake pad replacement
• If wiring/connectors show wear or damage
• During routine brake system service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253A
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensor, FRONT.OE Match replacement sensor designed to monitor the wear level of the front brake pads on the Porsche Macan 2.0L (95B). It delivers accurate, OE-equivalent performance that works with the vehicle’s onboard diagnostics system to notify the driver when brake pads require service.
Sold individually, typically 2 sensors per axle for complete front pad sets
Fits:
Porsche 95B.1 Macan 2.0L 2014 - 2018 FRONT
The sensor functions as an early warning device: when the brake pad friction material wears down to its service limit, the sensor changes electrical resistance or completes/disconnects a circuit that triggers the brake wear indicator on the dashboard. This timely alert helps prevent excessive pad wear and potential damage to the brake rotors.
The sensor installs directly into the caliper/pad assembly on the front axle, using the original mounting clips and wiring harness. This OE Match unit is ideal for brake pad replacement intervals, preventative maintenance, or whenever the original sensor is damaged or corroded.
The front brake pad wear sensor detects the remaining thickness of the brake pad friction material. When pads wear to the minimum safe level, it signals the vehicle’s onboard warning system to prompt brake service, helping protect the rotors and maintain consistent braking performance.
Function:
• Monitors front brake pad wear level
• Interfaces with vehicle’s dashboard warning system
• Alerts driver when front pads need replacement
Brake pads naturally wear over time with use. Without a functioning wear sensor, worn pads may go unnoticed, leading to decreased braking performance, rotor scoring, and higher repair costs. Installing a correct OE Match brake pad wear sensor ensures you receive timely warnings so pads can be replaced before damage occurs.
When to replace:
• Brake wear warning light illuminates
• Sensor damaged or corroded
• After front brake pad replacement
• If wiring/connectors show wear or damage
• During routine brake system service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B907253A
95B907253A
95B907253G
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Price: £11.31
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
PAB615121/1
Product Information
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB615121
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensors help to indicate if your brake pads need changing. These should be replaced when replacing your brake pads.- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 380Bhp 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 440Bhp 2019-21
Sold as EACH. There are 2 per axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB615121
PAB615121
4G0615121
95B615301B
39734
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21
Price: £6.95
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
DISPLAYING 1 to 12 (of 12 products)
Also found on these pages
About Brake Pad Wear Sensors
Porsche Brake Pad Anti-Wear Sensors | Design911 Precision Components for Safety, Monitoring & Maintenance
Brake pad anti-wear sensors play a vital role in your Porsche’s braking system by monitoring pad thickness and alerting you when replacement is needed. By providing real-time data, these sensors help prevent excessive wear, protect brake discs, and maintain braking safety. Replacing worn or damaged sensors ensures your Porsche’s onboard systems can accurately detect pad wear — preserving both performance and peace of mind.
At Design911, we supply a comprehensive range of brake pad anti-wear sensors designed for precise fitment and dependable performance. Manufactured using high-grade materials and advanced sensor technology, our components ensure accurate readings under all driving conditions. Ideal for routine maintenance, restoration, or brake system upgrades, these sensors help your Porsche maintain its legendary braking precision.
What Do Brake Pad Anti-Wear Sensors Do?
Brake pad wear sensors are an essential electronic component that monitor the condition of your brake pads and alert the driver when they need replacement.
Core Functions:
• Continuously monitor brake pad thickness.
• Trigger dashboard warning lights when pads reach the wear limit.
• Protect brake discs from damage caused by worn pads.
• Support preventative maintenance and consistent braking performance.
• Ensure optimal braking efficiency and driver safety.
Accurate brake pad sensors allow you to maintain Porsche’s high standards of safety, performance, and responsiveness.
Why Do Brake Pad Anti-Wear Sensors Fail or Degrade?
Because they operate in extreme environments near the wheels and brakes, wear sensors are exposed to heat, friction, and contamination, which can cause malfunction or damage over time.
Common Causes of Failure Include:
• Melting or cracking due to high brake temperatures.
• Corrosion or electrical failure from water and road salt.
• Cable wear or fraying caused by vibration or debris.
• Poor connections or sensor dislodgement during servicing.
• Age-related degradation of wiring or insulation.
When a sensor fails, the system may provide false warnings or fail to detect worn pads, increasing the risk of brake system damage or reduced safety.
Why Replace or Upgrade Your Porsche Brake Pad Anti-Wear Sensors?
Replacing faulty or aged sensors ensures your Porsche’s braking system continues to deliver accurate monitoring and performance reliability. Design911’s precision-engineered sensors are crafted for long-term durability and compatibility across Porsche models.
Key Benefits:
• Restores accurate brake pad wear monitoring.
• Prevents unnecessary pad or disc wear.
• Heat- and moisture-resistant design for long-lasting reliability.
• Plug-and-play fitment for easy installation.
• Engineered for exact Porsche compatibility.
• Ideal for maintenance, upgrades, or complete brake servicing.
Design911’s Porsche brake pad anti-wear sensors ensure consistent safety alerts and reliable performance — maintaining the precision and quality expected of every Porsche braking system.
Highlights
• Premium Porsche brake pad wear sensors for accurate
monitoring.
• Designed to withstand extreme heat and vibration.
• Ensures timely replacement of brake pads for safety.
• Protects discs and braking components from excessive wear.
• Compatible with classic and modern Porsche models.
• Perfect for servicing, restoration, or performance upgrades.
Popular Models
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information