Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Water / Coolant Pumps
Sold each
Fits:
Porsche 928 - 1978 to 1986
Porsche 970 Panamera - 2010 to 2016
Porsche 958 Cayenne - 2011 to 2018
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037801301
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Sold each
Fits:
Porsche 928 - 1978 to 1986
Porsche 970 Panamera - 2010 to 2016
Porsche 958 Cayenne - 2011 to 2018
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037801301
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Fits:
Porsche 958 Cayenne 3.0L DIESEL 2012-18
Porsche 970 Panamera 3.0L DIESEL 2012-16 (model: CRCC 184kW / CRCB 155kW)
Porsche 95B Macan 3.0L S 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810603331
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
OE Match water pump with gasket for Porsche 958 Cayenne, 970 Panamera and 95B Macan 3.0L diesel applications. Supplied with the sealing ring for the pump mounting joint.
Fits:
Porsche 958 Cayenne 3.0L DIESEL 2012-18
Porsche 970 Panamera 3.0L DIESEL 2012-16 (model: CRCC 184kW / CRCB 155kW)
Porsche 95B Macan 3.0L S 2014>>
Diagram ref no 1
What This Product Does
The pump moves coolant through the engine and cooling circuit, carrying heat towards the radiator. This circulation also supplies the heater circuit and helps maintain the engine’s operating temperature.
Functions
- Moves coolant through the cooling circuit.
- Transfers engine heat towards the radiator.
- Supplies coolant to the heater circuit.
Symptoms of Fault
- Seepage at the pump or its tell-tale opening.
- Dry coolant deposits near the housing.
- Whining, grinding or chirping around the pump.
- Noticeable pulley movement or bearing looseness.
- Unstable coolant temperature or overheating.
- Recurring coolant-level alerts.
- Weak heater output associated with insufficient circulation.
Why Replacement Matters
Deteriorated bearings, damaged seals or impaired coolant flow can leave the cooling circuit unable to remove enough engine heat. Renewing a confirmed faulty pump addresses the source of leakage or circulation loss. Inspect associated hoses, the pulley and mounting hardware during the repair, rather than assuming every cooling symptom originates at the pump.
FAQs
Can a pump fail without visible leakage?
Yes. Bearing deterioration or restricted circulation may appear before an external leak becomes evident.
Is the gasket included?
Yes. This pump is supplied with a gasket, described in the supplied diagrams as a sealing ring.
Does overheating confirm a pump fault?
No. Thermostat faults, trapped air, radiator problems and cooling-fan issues can produce similar symptoms. Inspection and cooling-system testing help identify the cause.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810603331
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
Fits:
Porsche 958 Cayenne 3.0L DIESEL 06/2010>>
Porsche 970 Panamera 3.0L DIESEL 2012-16 (model: CRCC 184kW / CRCB 155kW)
Porsche Macan 3.0L S DIESEL 02/2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
NOTE: Water Pump COMES WITH MOUNTING GASKET.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810603331
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
Fits:
Porsche 970 Panamera 3.0L DIESEL 2013-16 (model: CWJA 210kW)
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810603341
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
Fits:
Porsche 970 Panamera 3.0L DIESEL 2013-16 (model: CWJA 210kW)
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810603341
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
Water / Coolant Pumps – Reliable Engine Cooling for Porsche Vehicles
Water / coolant pumps are at the heart of your Porsche’s cooling system. Their job is to circulate coolant through the engine, radiator, and heater core, maintaining the correct operating temperature and preventing overheating. A properly functioning water pump ensures efficient heat transfer, optimal performance, and long-term engine reliability.
At Design911, we supply a wide range of genuine and high-quality water pumps for Porsche models including 911, Boxster, Cayman, Cayenne, Macan, Panamera and the transaxle cars. Each pump is precision-engineered to deliver consistent coolant flow, high durability, and dependable performance - ensuring your Porsche’s engine stays cool under all driving conditions.
What Do Water Coolant Pumps Do?
Water pumps are a critical
part of your engine’s temperature control system. They:
- Circulate coolant between the engine block, radiator, and heater system.
- Regulate temperature by dispersing heat efficiently throughout the system.
- Maintain coolant pressure for consistent engine operation.
- Support performance and longevity, preventing damage from excessive heat.
Without a properly working water pump, coolant circulation stops — leading to overheating, loss of performance, and potential engine failure.
Why Do Water Coolant Pumps Fail?
Even the most durable water
pumps can fail over time due to heat, age, and coolant contamination. Common
causes of failure include:
- Bearing wear or seal leaks caused by prolonged use or poor coolant quality.
- Corrosion or pitting from old or incompatible coolant mixtures.
- Cracked impellers or worn components reducing flow efficiency.
- Coolant leaks around the housing or pulley.
- Age-related wear, especially in high-mileage vehicles.
Signs of failure include visible coolant leaks, high engine temperature, whining noises from the pump area, or reduced cabin heating.
Why Replace a Faulty Water Coolant Pump?
A failing water pump can cause severe engine overheating, loss of coolant, or total breakdown. Replacing a worn pump restores reliable cooling and helps protect your engine from costly damage.
Benefits of
replacement include:
- Restored coolant circulation and cooling efficiency.
- Improved engine reliability and performance.
- Prevention of leaks, overheating, and corrosion.
- Long-lasting, high-quality construction for dependable operation.
All water pumps in this range are built using high-strength materials, precision impellers, and sealed bearings designed to deliver durability, quiet operation, and efficient coolant flow over time.